Micro Load Cell, S Type, 5N/500N/1000N, 1kg/10kg/30kg/200kg

$177.78
S type micro load cell can bear both tension and pressure, with small size 5*16*19.1mm, good stability, good output symmetry, high accuracy, low temperature drift, compact structure and overload protection. Micro load cell is suited to use in restricted spaces such as manipulator and robot, and specifically used for button tester and force gauge.
SKU: ATO-LC-S04
*
Free Shipping
Delivery date: 6-12 days

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

S type tension and compression load cells have capacity range from 0.5kg, 1kg, 5kg, 10kg, 30kg to 200kg (5N to 2000N). Load cell capacity can be customized according to customer requirements.

Specification

ModelATO-LCS-DYLY-108
Weight0.1kg
Capacity Range *0kg~200kg (0~2000N)
Matched Display ControllerATO-DDC5-CHB (Click it to the controller page)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Accuracy0.05%F.S (linearity + hysteresis + repeatability)
Sensitivity2.0±0.2mV/V (Low range variations may differ)
Creep±0.05%F.S/30min
Zero Output±2%F.S
Temperature Effect on Zero±0.05%F.S/10℃
Temperature Effect on Output±0.05%F.S/10℃
Operating Temperature-20℃~+80℃
Input Impedance350±30Ω
Output Impedance350±5Ω
Insulation Resistance≥5000MΩ/DC 100V
Safety Overload150%F.S
Ultimate Overload300%F.S
Bridge Voltage (excitation voltage)DC 5V
Maximum Bridge VoltageDC 15V
Material17-4PH stainless steel
Protection ClassIP66
Cable Length1.5m
WiringEXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


Feature

Micro load cell s type 0kg to 200kg feature

  • Premium 17-4PH Stainless Steel: Made from high-quality 17-4PH stainless steel, resistant to corrosion and fatigue, ensuring long-lasting durability.
  • High-Precision Measurement: Designed for high accuracy, capable of working in extreme temperatures (high/low) and high-pressure environments.
  • Bidirectional Force Measurement: Convenient for both tension and compression force measurement, suitable for a variety of applications.
  • Easy Installation: Simple installation with stable performance, featuring high sensitivity for precise measurements.
  • Durable and Reliable: Strong fatigue resistance and robust construction for extended service life.

Dimension

Micro load cell s type 0kg to 200kg dimensions

Rated Cap (kg/mm)LWHM
0.5–10 kg1619.15M3
20–50 kg1619.16M4
100–200 kg264014M8


Wiring Method

Load cell wiring method

Tips: What is the primary use of the S Type Micro Load Cell?

The S Type Micro Load Cell is primarily used to measure force and weight with high precision. It is an ideal solution for applications that require accurate measurements of either tensile (pulling) or compressive (pushing) forces. Typical applications include:

  • Material Testing: Used in laboratories to test the strength of materials and evaluate their properties under various forces.
  • Industrial Machinery: Helps in monitoring forces in machines, ensuring that loads are within safe operational limits.
  • Robotics: Can be used in robotic arms for force feedback, enabling precise movements and actions.
  • Force Gauges: Often used in handheld or benchtop force gauges for measuring and displaying force exerted on an object.

In this video, ATO will show you how to wire a strain gauge load cell with a display controller.

Low Profile Micro Compression Button Load Cell 100kg
This video introduces the specs, design features and applications of a low profile miniature button load cell DYHW-110 that's intended for compression force measurement. The maximum load capacity it can bear is 100kg. It can achieve 0.5%F.S accuracy with 150%F.S safety overload and temperature compensation.

Shear Beam Load Cell | Single & Double-Ended, Weighbridge Load Cells

The shear beam load cell is a common load cell. Its working principle is based on the deformation of the elastomer when it is acted upon by an external force. This deformation will cause the resistance of the elastomer to change, thereby achieving the measurement of the external force. It is typically used to measure forces in the small to medium range and its working principle is based on the shear effect of elastically deforming materials. This type of force measuring element is usually made of metal or polymer materials. Because of its high elastic modulus and shear modulus, it can produce stable shear deformation when subjected to external forces.

How to Ensure the Accuracy of Your Weighing System?

This video describes five factors that affect the accuracy of a weighing system and provides recommendations for selecting, installing, and operating the system to handle these factors.

Load Cell Transmitter 4~20mA Output Calibration

This video demonstrates how to calibrate the 4~20mA output. The 0~10V is also calibrated in the same way.

How Does PLC Read Data of Load Cell Transmitter?

In this video, it shows how PLC reads data from sensor transmitter. This system mainly consists of PLC, ATO load cell transmitter, ATO load cell, 24VDC power supply, personal computer, etc.

Product reviews
Load cell bridge voltage
5
Cole
Avatar
4/8/2020 1:47 AM
Does the Bridge (Excitation) Voltage mean the amount of volts I need to in order to turn on the load cell?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the load cell bridge (excitation) voltage can also be called working voltage, input voltage or supply voltage. Because the main circuit of load cell is the Wheatstone bridge. For our load cell, the excitation voltage can be DC 5-15V.
Does ATO provide wireless load cells?
5
Chadm
Avatar
5/10/2021 1:14 AM
Do you provide wireless load cells?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, of course. just need to confirm which model of our load cell you are intersted in, as some supported and someother not.
Distance between mincro load cell and transmitter
5
Dorothyg
Avatar
11/3/2021 11:49 PM
In short, can I use your load cell amplifier for a concrete batching plant where the load cell may be placed about 40 meters far from the amplifier where the environment may produce a lot of noise. Your amplifier lacks cable shield input and four load cells tied together for single amplifiers.
Was this review helpful? Yes No (0/0)
ATO Responded
The distance between the transmitter and the load cell can be up to 50 meters, and shielding cable can also be used, so the length of 40 meters is okay.
We cannot confirm the influence and interference of a lot of noise on the sensor signal.
I have a problem with the load cell, please provide a solution.
5
Christopher
Avatar
1/24/2022 7:36 PM
Our application weighs points at a time and we need a controller with 6 channels to connect all 6 load cells in the same controller to identify independence load cell weight and consolidated weight. Please provide a solution for the same.
Was this review helpful? Yes No (0/0)
ATO Responded
No controller can be connected to 6 sensors at the same time. But you can use a junction box to measure the consolidated value.
Where should I connect the yellow wire?
5
dylan
Avatar
3/1/2023 1:02 AM
I purchased this load cell and display controller for load cells in your website.
I can read Chinese, but the manual only introduce how to use the controller, not how to wiring. The diagram is very helpful, and my last question is where should I connect the yellow wire (shield) to? There are five wires from the load cell (red, black, green, white, yellow).
Thanks.
Was this review helpful? Yes No (0/0)
ATO Responded
This yellow line (shielding line) of the sensor does not need to be connected.
For the other four lines, please follow the picture description.
Please feel free to let us know if you have any further questions.
More information in load cell application
5
sini
Avatar
7/20/2023 1:08 AM
Hey
I'm looking at the Micro Load CELL, S- Type, 5N,500N,1000N.
I want to ask you if you can supply me with a dynamic response, frequency response, and any other relevant information related to its performance in dynamic force measurement applications.
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, our load cells can only measure under static conditions, and dynamic measurements may not be accurate.
Test cable
4
Larion
Avatar
6/4/2025 9:16 PM
Hello, I need to measure a cable with a tension of 20 N, what do you recommend?
Was this review helpful? Yes No (0/0)
ATO Responded
If you need to measure a cable with a tension of 20 N, we recommend using our S-type load cell. Product model: ATO-LC-S04, range 3 kg.
TEDS function
5
Jakos
Avatar
12/2/2025 8:19 PM
What is the function of TEDS? How do I use it with sensors and transmitters?
Was this review helpful? Yes No (0/0)
ATO Responded
TEDS (Transducer Electronic Data Sheet) enables automatic electrical calibration when sensors with TEDS functionality are used with transmitters. Unfortunately, the ATO-LCS-DYLY-108 standard version does not have TEDS functionality.
The sensitivity
5
Karinsie
Avatar
2/4/2026 12:10 AM
What is the sensitivity of the ATO-LC-S04 (0.5kg (5N) sensor)?
Was this review helpful? Yes No (0/0)
ATO Responded
The output sensitivity of this sensor is 1.0 mV/V, and the minimum detectable quantity is 0.1g.
0.5kg 5N sensor deflection
4
Catalin
Avatar
4/27/2026 7:43 PM
What is the 0.5kg (5N) sensor deflection at full scale ?
Was this review helpful? Yes No (0/0)
ATO Responded
It is generally between 0.05mm and 0.1mm.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

S type tension and compression load cells have capacity range from 0.5kg, 1kg, 5kg, 10kg, 30kg to 200kg (5N to 2000N). Load cell capacity can be customized according to customer requirements.

Specification

ModelATO-LCS-DYLY-108
Weight0.1kg
Capacity Range *0kg~200kg (0~2000N)
Matched Display ControllerATO-DDC5-CHB (Click it to the controller page)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Accuracy0.05%F.S (linearity + hysteresis + repeatability)
Sensitivity2.0±0.2mV/V (Low range variations may differ)
Creep±0.05%F.S/30min
Zero Output±2%F.S
Temperature Effect on Zero±0.05%F.S/10℃
Temperature Effect on Output±0.05%F.S/10℃
Operating Temperature-20℃~+80℃
Input Impedance350±30Ω
Output Impedance350±5Ω
Insulation Resistance≥5000MΩ/DC 100V
Safety Overload150%F.S
Ultimate Overload300%F.S
Bridge Voltage (excitation voltage)DC 5V
Maximum Bridge VoltageDC 15V
Material17-4PH stainless steel
Protection ClassIP66
Cable Length1.5m
WiringEXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


Feature

Micro load cell s type 0kg to 200kg feature

  • Premium 17-4PH Stainless Steel: Made from high-quality 17-4PH stainless steel, resistant to corrosion and fatigue, ensuring long-lasting durability.
  • High-Precision Measurement: Designed for high accuracy, capable of working in extreme temperatures (high/low) and high-pressure environments.
  • Bidirectional Force Measurement: Convenient for both tension and compression force measurement, suitable for a variety of applications.
  • Easy Installation: Simple installation with stable performance, featuring high sensitivity for precise measurements.
  • Durable and Reliable: Strong fatigue resistance and robust construction for extended service life.

Dimension

Micro load cell s type 0kg to 200kg dimensions

Rated Cap (kg/mm)LWHM
0.5–10 kg1619.15M3
20–50 kg1619.16M4
100–200 kg264014M8


Wiring Method

Load cell wiring method

Tips: What is the primary use of the S Type Micro Load Cell?

The S Type Micro Load Cell is primarily used to measure force and weight with high precision. It is an ideal solution for applications that require accurate measurements of either tensile (pulling) or compressive (pushing) forces. Typical applications include:

  • Material Testing: Used in laboratories to test the strength of materials and evaluate their properties under various forces.
  • Industrial Machinery: Helps in monitoring forces in machines, ensuring that loads are within safe operational limits.
  • Robotics: Can be used in robotic arms for force feedback, enabling precise movements and actions.
  • Force Gauges: Often used in handheld or benchtop force gauges for measuring and displaying force exerted on an object.
Product reviews
Load cell bridge voltage
5
Cole
Avatar
4/8/2020 1:47 AM
Does the Bridge (Excitation) Voltage mean the amount of volts I need to in order to turn on the load cell?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the load cell bridge (excitation) voltage can also be called working voltage, input voltage or supply voltage. Because the main circuit of load cell is the Wheatstone bridge. For our load cell, the excitation voltage can be DC 5-15V.
Does ATO provide wireless load cells?
5
Chadm
Avatar
5/10/2021 1:14 AM
Do you provide wireless load cells?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, of course. just need to confirm which model of our load cell you are intersted in, as some supported and someother not.
Distance between mincro load cell and transmitter
5
Dorothyg
Avatar
11/3/2021 11:49 PM
In short, can I use your load cell amplifier for a concrete batching plant where the load cell may be placed about 40 meters far from the amplifier where the environment may produce a lot of noise. Your amplifier lacks cable shield input and four load cells tied together for single amplifiers.
Was this review helpful? Yes No (0/0)
ATO Responded
The distance between the transmitter and the load cell can be up to 50 meters, and shielding cable can also be used, so the length of 40 meters is okay.
We cannot confirm the influence and interference of a lot of noise on the sensor signal.
I have a problem with the load cell, please provide a solution.
5
Christopher
Avatar
1/24/2022 7:36 PM
Our application weighs points at a time and we need a controller with 6 channels to connect all 6 load cells in the same controller to identify independence load cell weight and consolidated weight. Please provide a solution for the same.
Was this review helpful? Yes No (0/0)
ATO Responded
No controller can be connected to 6 sensors at the same time. But you can use a junction box to measure the consolidated value.
Where should I connect the yellow wire?
5
dylan
Avatar
3/1/2023 1:02 AM
I purchased this load cell and display controller for load cells in your website.
I can read Chinese, but the manual only introduce how to use the controller, not how to wiring. The diagram is very helpful, and my last question is where should I connect the yellow wire (shield) to? There are five wires from the load cell (red, black, green, white, yellow).
Thanks.
Was this review helpful? Yes No (0/0)
ATO Responded
This yellow line (shielding line) of the sensor does not need to be connected.
For the other four lines, please follow the picture description.
Please feel free to let us know if you have any further questions.
More information in load cell application
5
sini
Avatar
7/20/2023 1:08 AM
Hey
I'm looking at the Micro Load CELL, S- Type, 5N,500N,1000N.
I want to ask you if you can supply me with a dynamic response, frequency response, and any other relevant information related to its performance in dynamic force measurement applications.
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, our load cells can only measure under static conditions, and dynamic measurements may not be accurate.
Test cable
4
Larion
Avatar
6/4/2025 9:16 PM
Hello, I need to measure a cable with a tension of 20 N, what do you recommend?
Was this review helpful? Yes No (0/0)
ATO Responded
If you need to measure a cable with a tension of 20 N, we recommend using our S-type load cell. Product model: ATO-LC-S04, range 3 kg.
TEDS function
5
Jakos
Avatar
12/2/2025 8:19 PM
What is the function of TEDS? How do I use it with sensors and transmitters?
Was this review helpful? Yes No (0/0)
ATO Responded
TEDS (Transducer Electronic Data Sheet) enables automatic electrical calibration when sensors with TEDS functionality are used with transmitters. Unfortunately, the ATO-LCS-DYLY-108 standard version does not have TEDS functionality.
The sensitivity
5
Karinsie
Avatar
2/4/2026 12:10 AM
What is the sensitivity of the ATO-LC-S04 (0.5kg (5N) sensor)?
Was this review helpful? Yes No (0/0)
ATO Responded
The output sensitivity of this sensor is 1.0 mV/V, and the minimum detectable quantity is 0.1g.
0.5kg 5N sensor deflection
4
Catalin
Avatar
4/27/2026 7:43 PM
What is the 0.5kg (5N) sensor deflection at full scale ?
Was this review helpful? Yes No (0/0)
ATO Responded
It is generally between 0.05mm and 0.1mm.
Only registered users can write reviews
Customers who bought this item also bought

Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

ATO-LCTR-OA
$81.27
Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.

Digital Load Cell Amplifier, Output 4-20mA/0-10V/RS485

ATO-LCTR-OAR
$109.85
High precision load cell amplifier has a 6 digit LED display, output signal 4-20mA/ 0-5V/ 0-10V/ RS485. There are 3 keys for parameter settings. Digital load cell amplifier can be calibrated on-line by its 3 keys. The setting parameters include zero, capacity, communication rate, division value, decimal digits, etc.

5 Digit Display Controller for Load Cells

ATO-DPM-LC5D
$210.80
Digital panel meter can cooperate with load cells, force sensors and weighing sensors, two outputs for data comparison, digital panel meter can display gross, net, peak and valley value alternately.

Micro Load Cell, S type, 1kg/2kg/3kg/10kg to 50kg

ATO-LC-S03
$142.38
S type load cell can bear both tension and pressure, with good stability, good output symmetry, high accuracy, low temperature drift, compact structure and complete specifications. Micro load cell is suited to use in restricted spaces.

Ring Load Cell, Through Hole, 50kg/200kg/500kg to 5000kg

ATO-LC-1003
$259.63
Through hole ring design, the ring load cell has a strong load capacity and is suitable for weighing tasks from 0-50kg/200kg/500kg to 5000kg. Fully sealed alloy steel construction for long-lasting operation in complex industrial environments.