Capacitive Proximity Sensor, M12, PNP, NO/NC

$39.99
M12 proximity sensor can detect non-metallic (such as plastics, liquids) and metallic materials, and is suitable for liquid level monitoring, powder height measurement, etc. Capacitive proximity sensor adopts an unshielded installation design, a detection distance of 5mm, an IP67 protection level, strong anti-interference, compact size and long life.
SKU: ATO-PROS-C12
*
Free Shipping
Delivery date: 6-12 days

Capacitive proximity sensor with M12*1 thread, PNP type output, manufacturer direct sale. The operating temperature range of the PNP proximity sensor is -30~65℃ (non-freezing or condensation), and it can adapt to a wide temperature range.

Functions

  • Red LED checks the state of proximity sensor
  • High repeated positioning accuracy
  • High switching frequency
  • Wide voltage range
  • Antivibration, dust, water and oil prevention
  • Reverse power protection, short circuit protection, directly connecting with PLC

Specification

ModelATO-PSC-12AAZ
Installation typeUnshieldedShielded
All the output methodsDC typeNPNNONO
NCNC
PNPNONO
NCNC
Detection range5mm±10%2mm±10%
Setting distance0-4mm0-1.7mm
Delay distance≤10% detection range
Detection objectAny dielectric substance
Standard detection objectSPCC iron 50*50*1mm
Response frequencyDC: 0.5kHz, AC: 25Hz
Supply voltageDC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass, Detection surface: ABS
Protection classIP67
Cable length1.2m


Dimensional drawing (unit: mm)

Proximity sensor capacitive M12 dimensional drawing

Wiring diagram

Proximity sensor PNP wiring

Tips: Problems of proximity sensor's indicator light

Indicator light has a signal prompt without signal output, or signal light is on without signal changes, or indicator light keeps blinking. All indicate that there is an abnormal condition or bad phenomenon. The reasons are as follows:

  1. Sensor and device wiring error, working voltage error, equipment short circuit and others lead to damages and breakdown caused by the burning of circuit inside sensor
  2. Poor connection or unstable short circuit that occurs in the device circuit makes non-destructive damages inside the sensor.
  3. There is no protection function in sensor itself. Because connection error or short circuit directly makes the sensor not available.

How to Count Using Photoelectric Sensor?

In this video, ATO will show you how to count using slot photoelectric sensors and digital counters.

Product reviews
I am very satisfied with this M12 proximity sensor
5
Mrjoe
Avatar
8/8/2021 9:42 PM
M12 proximity sensor works perfect and reliably senses fingers, glass, metals, wood. Super happy with it! I am very satisfied with it.
Was this review helpful? Yes No (0/0)
Makes work smoother
5
Gabriel100
Avatar
10/18/2023 8:42 PM
The M12 capacitive proximity sensor is awesome! Its high-performance PNP output makes my work smoother and the operation easier. Buying this M12 capacitive proximity sensor was one of the smartest choices I made, both in terms of performance and quality.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Capacitive proximity sensor with M12*1 thread, PNP type output, manufacturer direct sale. The operating temperature range of the PNP proximity sensor is -30~65℃ (non-freezing or condensation), and it can adapt to a wide temperature range.

Functions

  • Red LED checks the state of proximity sensor
  • High repeated positioning accuracy
  • High switching frequency
  • Wide voltage range
  • Antivibration, dust, water and oil prevention
  • Reverse power protection, short circuit protection, directly connecting with PLC

Specification

ModelATO-PSC-12AAZ
Installation typeUnshieldedShielded
All the output methodsDC typeNPNNONO
NCNC
PNPNONO
NCNC
Detection range5mm±10%2mm±10%
Setting distance0-4mm0-1.7mm
Delay distance≤10% detection range
Detection objectAny dielectric substance
Standard detection objectSPCC iron 50*50*1mm
Response frequencyDC: 0.5kHz, AC: 25Hz
Supply voltageDC type: DC 12-24V (6-36V), impulse (p-p) 10% below; AC type: AC 110-220V (90-250V) 50/60Hz
Withstand voltageAC1000V 50/60Hz 1min between charging part and housing
Voltage influenceInside ±15% rated supply voltage range, at rated supply voltage value, inside ±10% detection distance
Consumption currentN/P type: ≤13mA, D type: ≤0.8mA, A type: ≤1.7mA
Control outputN/P type: ≤300mA, D type: ≤200mA, A type: ≤400mA
Loop protectionN/P/D type: reversal connection protection, surge absorption, load short-circuit protection, A type: surge absorption
Ambient temperature & humidityOperation temperature/storage temperature: -30~65℃ (no freeze, no dew); Operation humidity/storage humidity: 35~95%RH
Temperature influenceTemperature range -30~65℃, at +23℃, ±15% detection distance; Temperature range -25~60℃, at +23℃, ±10% detection distance
Insulation impedance≥50MΩ (DC500 megameter) between charging part and housing
MaterialHousing: Nickel plated brass, Detection surface: ABS
Protection classIP67
Cable length1.2m


Dimensional drawing (unit: mm)

Proximity sensor capacitive M12 dimensional drawing

Wiring diagram

Proximity sensor PNP wiring

Tips: Problems of proximity sensor's indicator light

Indicator light has a signal prompt without signal output, or signal light is on without signal changes, or indicator light keeps blinking. All indicate that there is an abnormal condition or bad phenomenon. The reasons are as follows:

  1. Sensor and device wiring error, working voltage error, equipment short circuit and others lead to damages and breakdown caused by the burning of circuit inside sensor
  2. Poor connection or unstable short circuit that occurs in the device circuit makes non-destructive damages inside the sensor.
  3. There is no protection function in sensor itself. Because connection error or short circuit directly makes the sensor not available.
Product reviews
I am very satisfied with this M12 proximity sensor
5
Mrjoe
Avatar
8/8/2021 9:42 PM
M12 proximity sensor works perfect and reliably senses fingers, glass, metals, wood. Super happy with it! I am very satisfied with it.
Was this review helpful? Yes No (0/0)
Makes work smoother
5
Gabriel100
Avatar
10/18/2023 8:42 PM
The M12 capacitive proximity sensor is awesome! Its high-performance PNP output makes my work smoother and the operation easier. Buying this M12 capacitive proximity sensor was one of the smartest choices I made, both in terms of performance and quality.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Proximity Sensor, Inductive, NPN, NO/NC, 4 mm

ATO-PROS-I4
$39.95
4mm proximity sensor can detect a variety of metals, miniature size, long life, low price, shielded type installation, anti-interference ability, 1mm detection distance, using for precise positioning of molds, precision machine tools and robots. The inductive proximity sensor is used to detect magnetic metals (for non-magnetic metals, the detection range is reduced).