Good price GPS speed sensor supports negative and positive pulse output up to 50,000/km. It works at 8-32V operating voltage with a 1~2 years long life working period, specially designed for various speedometers and driving recorders.
Specifications
| Model | ATO-GS202 | |
| Size | 4.5cm (L) x1.9cm (W), 100cm Extension Cable | |
| Operating Voltage | 8-32V | |
| Input Voltage | 6-36V | |
| Pulse Signal | Supports negative and positive pulse output with a maximum of 50,000 pulses/km | |
| Energy Consumption | Passive Consumption | 240mW |
| Active Consumption (with Antenna) | 480mW | |
| Maximum Current Consumption | <25mA | |
| Error | Horizontal Land | <5m (50%), < 8m (90%) |
| Altitude | <10m (50%), <16m (90%) | |
| Speed | <0.06m/sec=0.22km/h | |
| Reaction Time | After Locking | <2s (90%) |
| First Power on | <38s (50%), <42s (90%) | |
| Temporary Power off | <10s (50%), <13s (90%) | |
| Operational Restrictions | Altitude | 18000m |
| Speed | Max 300km/h | |
| Applications | Various Speedometers, Driving Recorders | |
GPS Speed Sensor Cable Definition
- RED: Power +, DC 8~32V (please connect a resistor like the image above)
- BLACK: Ground
- GREEN: Speed Pulse Signal Output +
- BIUE: Speed Pulse Signal Output -
Please connect a GREEN or BLUE cable (one of the two) to your current Speedometer/odometer/tachograph.
GPS Antenna: Securely fasten the GPS antenna, preferably outdoors (ar inside front windscreen) so that it has a clear view of the sky to pick up satellite signals.
Working Principle

Tips: How to program the speed ratio to fit your current speedometer/odometer/tachograph?
- Connect the speed signal (Green or Blue) cable with your device.
- Power on GS202 GPS speed sensor and speedometer.
- Press the button via the hole, and hold on for 10 seconds, you will see the needle start running.
- Release the button, and wait for 5 seconds.
- Hold on to the button again, the needle will run in the opposite direction.
- Use steps 3~5, to make the needle point at 60km/h, then release the button and power.
- Setting is done.
- It fits the speed ratio range is 1~20,000ppk.
Customers who bought this item also bought
Pressure Sensor for Air/Water/Oil, 4-20mA/0-5V/RS485 Output
ATO-PRES-P300
$119.68
Silicon piezoresistive pressure sensor covers -0.1 to 100 MPa with 4–20mA, 0–20mA, multiple voltage or RS485 output options. Stainless steel construction supports air, water and oil pressure measurement at medium temperatures from -40°C to 60°C.
Isolated DC Voltage Sensor 10mV to 1000V, Power Supply DC 12V/24V
ATO-VOS-DC1000
$141.96
DC voltage sensor uses modulation and demodulation technology to achieve input/output/power supply isolation. Isolated voltage transducer has measuring range from DC 10mV/50mV/75mV/5V/150V/300V/500V to 1000V, supply voltage DC 12V/24V, accuracy 0.2%FS, output signal 0-5V/0-10V/0-20mA/4-20mA and strong anti-interference capability. DC voltage sensor is widely used for voltage isolated measuring and control, such as electric power, remote monitoring, medical equipment, etc.
DC Current Sensor 1mA/1A/5A/10A/100A to 800A
ATO-CUS-DC800
$85.56
DC current sensor has best cost performance, fast response, high accuracy, good stability, small size, light weight, DIN rail installation, widely used for DC current measurement of various occasions.