Hall Speed Sensor, M12

$254.35
The provided Hall effect sensor is a non-contact speed sensor. With M12, 0Hz~20KHz frequency, the speed sensor can meet the requirements of high speed measurement. Output signal level pulse/NPN/PNP can be chosen. Cheap Hall effect rpm sensor can be used for zero speed measurement of rotating machinery.
SKU: ATO-HSS-M12
*
Free Shipping
Delivery date: 7-10 days

Reliable Hall speed sensors for sale online. Hall effect gear tooth sensor, M12, can measure the speed of gears or rotating objects without contact, provides an optional output signal (level pulse/NPN/PNP) and strong anti-interference ability. Stainless steel Hall effect speed sensor is ideal for harsh application environments.

Specifications

Electrical Parameters
ModelATO-TSS
TypeHall Effect Speed Sensor
Shell ShapeThreaded Cylinder
Shell SpecificationsM12
VoltageDC 4V~30V
Working Frequency0Hz~20kHz
Measurement MethodNon-Contact Measurement
Sensing RangeConventional: 0.5mm~3mm, Special Type: 0.5mm~7mm, Measuring Magnet: 0.5mm~30m
Number of Output ChannelsSingle Channel
Output Signal TypeLevel Pulse, NPN, PNP
Mounting TypeExplosion Proof Cable Direct Outlet
Cable Length2m (Default), Contact Us for Other Options
Output WaveformRectangular Wave
Output AmplitudeHigh Level≥Power Supply -0.3V, Low Level ≤0.3V
No-Load Power Consumption Current≤20mA
Insulation Resistance≥50MΩ@500V DC
Dielectric StrengthAC500V/ 50Hz/60s
Electromagnetic Compatibility.Comply with CE Standard EMC Requirements
Protective FunctionPower Supply Polarity Protection, Output Short Circuit Protection
Mechanical Parameters
Measured ObjectThere should be protuberances or grooves on the measured body or magnetic conductive. Gear is suggested standard involute gear, modulus ≥1.5.
Note: Non-standard gear or unequal width between slot and flat surface will lead to a change of waveform duty ratio.
Material Under TestMagnetic Mild Steel or Magnet
Sensor Housing MaterialIntegrated Stainless Steel Shell
Environmental Parameters
Operating Temperature-40℃~+135℃
Storage and Transport Temperature-40℃~+150℃
Relative Humidity≤90%
High and Low Temperature PerformanceHigh and Low Temperature Cycle Test For 10 Cycles, (Low Temperature: -40 Degrees; High Temperature: 150 Degrees), Each Placed For 30 mins, Cycle Alternately
Vibration ResistanceVertical PSD=20g2/Hz, Transverse PSD=20g2/Hz, Longitudinal PSD=30g2/Hz, 5Hz~1200Hz, Random vibration
Impact Resistance30g
Degree of ProtectionIP67


Features

  • It is a single-channel speed sensor based on the Hall principle.
  • Reliable explosion-proof speed sensor measures the speed of gears or rotating objects through non-contact, simple, stable, and maintenance-free.
  • The high-quality speed sensor with voltage pulse signal and strong anti-interference ability is more suitable for harsh application environments.
  • Threaded installation, specifications and sizes can be customized according to customer needs. If you have a need, please get in touch with us.

Dimension (Unit: mm)

Hall speed sensor dimension

*Note for Electrical Connection:

  • The direct outlet of the speed sensor is equipped with a 1~2m shielded cable as standard.
  • Contact us for customizing the length or other mounting types (connector or cable direct outlet + connector).
  • 3 Wires: Brown/Red - Vcc+, Black/White - Signal, Blue - Gnd

Output Signal

Hall speed sensor output signal

Applications

Explosion-proof speed sensor applications

Tips: What is a Hall effect speed sensor?

A Hall effect speed sensor is a type of sensor that utilizes the Hall effect phenomenon to measure the speed or rotational velocity of a moving object. The Hall effect refers to the creation of an electric potential difference, or voltage, across a conductor when it is subjected to a perpendicular magnetic field and an electric current flows through it. In the case of a Hall effect speed sensor, the moving object is typically equipped with a magnet, and as the object moves, it generates a changing magnetic field that is detected by the Hall effect sensor. The sensor then produces an electrical signal proportional to the speed of the object.

In this video, ATO will show you top ten most used sensors (sensing technologies).

Product reviews
excellent hall speed sensor
5
Gigi
Avatar
11/3/2025 5:50 PM
I've been testing this hall speed sensor on some industrial equipment and it's been flawless. The signal stays clean and accurate even when there's a lot of electrical noise around. Stainless steel body has held up perfectly in our dusty workshop.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Reliable Hall speed sensors for sale online. Hall effect gear tooth sensor, M12, can measure the speed of gears or rotating objects without contact, provides an optional output signal (level pulse/NPN/PNP) and strong anti-interference ability. Stainless steel Hall effect speed sensor is ideal for harsh application environments.

Specifications

Electrical Parameters
ModelATO-TSS
TypeHall Effect Speed Sensor
Shell ShapeThreaded Cylinder
Shell SpecificationsM12
VoltageDC 4V~30V
Working Frequency0Hz~20kHz
Measurement MethodNon-Contact Measurement
Sensing RangeConventional: 0.5mm~3mm, Special Type: 0.5mm~7mm, Measuring Magnet: 0.5mm~30m
Number of Output ChannelsSingle Channel
Output Signal TypeLevel Pulse, NPN, PNP
Mounting TypeExplosion Proof Cable Direct Outlet
Cable Length2m (Default), Contact Us for Other Options
Output WaveformRectangular Wave
Output AmplitudeHigh Level≥Power Supply -0.3V, Low Level ≤0.3V
No-Load Power Consumption Current≤20mA
Insulation Resistance≥50MΩ@500V DC
Dielectric StrengthAC500V/ 50Hz/60s
Electromagnetic Compatibility.Comply with CE Standard EMC Requirements
Protective FunctionPower Supply Polarity Protection, Output Short Circuit Protection
Mechanical Parameters
Measured ObjectThere should be protuberances or grooves on the measured body or magnetic conductive. Gear is suggested standard involute gear, modulus ≥1.5.
Note: Non-standard gear or unequal width between slot and flat surface will lead to a change of waveform duty ratio.
Material Under TestMagnetic Mild Steel or Magnet
Sensor Housing MaterialIntegrated Stainless Steel Shell
Environmental Parameters
Operating Temperature-40℃~+135℃
Storage and Transport Temperature-40℃~+150℃
Relative Humidity≤90%
High and Low Temperature PerformanceHigh and Low Temperature Cycle Test For 10 Cycles, (Low Temperature: -40 Degrees; High Temperature: 150 Degrees), Each Placed For 30 mins, Cycle Alternately
Vibration ResistanceVertical PSD=20g2/Hz, Transverse PSD=20g2/Hz, Longitudinal PSD=30g2/Hz, 5Hz~1200Hz, Random vibration
Impact Resistance30g
Degree of ProtectionIP67


Features

  • It is a single-channel speed sensor based on the Hall principle.
  • Reliable explosion-proof speed sensor measures the speed of gears or rotating objects through non-contact, simple, stable, and maintenance-free.
  • The high-quality speed sensor with voltage pulse signal and strong anti-interference ability is more suitable for harsh application environments.
  • Threaded installation, specifications and sizes can be customized according to customer needs. If you have a need, please get in touch with us.

Dimension (Unit: mm)

Hall speed sensor dimension

*Note for Electrical Connection:

  • The direct outlet of the speed sensor is equipped with a 1~2m shielded cable as standard.
  • Contact us for customizing the length or other mounting types (connector or cable direct outlet + connector).
  • 3 Wires: Brown/Red - Vcc+, Black/White - Signal, Blue - Gnd

Output Signal

Hall speed sensor output signal

Applications

Explosion-proof speed sensor applications

Tips: What is a Hall effect speed sensor?

A Hall effect speed sensor is a type of sensor that utilizes the Hall effect phenomenon to measure the speed or rotational velocity of a moving object. The Hall effect refers to the creation of an electric potential difference, or voltage, across a conductor when it is subjected to a perpendicular magnetic field and an electric current flows through it. In the case of a Hall effect speed sensor, the moving object is typically equipped with a magnet, and as the object moves, it generates a changing magnetic field that is detected by the Hall effect sensor. The sensor then produces an electrical signal proportional to the speed of the object.

Product reviews
excellent hall speed sensor
5
Gigi
Avatar
11/3/2025 5:50 PM
I've been testing this hall speed sensor on some industrial equipment and it's been flawless. The signal stays clean and accurate even when there's a lot of electrical noise around. Stainless steel body has held up perfectly in our dusty workshop.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews