Force Torque Sensor, Flange, 0-20/30/50/100/200 Nm

$246.19
High precision force torque sensor is a static torque transducer, comes with flange mounting, IP65 protection level, 0-20/30/50/100/200 Nm capacity, suitable for mechanical arm joint torque force measurement, force detection, force value analysis tester and other torque force testing instruments.
SKU: ATO-TQS-105
*
Free Shipping
Delivery date: 6-12 days

Flanged force torque sensor for sale online. This torque transducer is available with high accuracy, strong anti-interference ability, IP65 protection level and 0-20/30/50/100/200 Nm capacity, which can be used to measure static, non-continuous rotating torque value.

Specifications

ModelATO-DYJN-105
Capacity0-200 N.m
Rated Output1.5±0.5%
Zero Balance±0.5%F.S.
Non-Linearity±0.5%F.S.
Hysteresis±0.5%F.S.
Repeatability±0.5%F.S.
Creep0.3%F.S.(30min)
Temp Effect on Output0.3%F.S./10°C
Temp Effect on Zero0.1%F.S./10°C
Response Frequency10kHz
MaterialAluminum alloy/alloy steel
Impedance700±5Ω
Insulation≥5000MΩ/100V DC
Working Voltage5-15V
Operating Temp Range-20°C-80°C
Safe Overload150%
Maximum Overload200%
Cable Specifications3x2m
Cable Ultimate Pull10kg
TEDSContact us


Dimension (Unit: mm)

Static torque sensor dimension

Sensor Wiring Diagram

Static torque sensor wiring diagrams

Sensor Force Diagram

Static torque sensor force diagrams

Applications

Static torque sensor applications

Tips: Is a torque sensor the same as a torque transducer?

Yes, a torque sensor and a torque transducer refer to the same type of device. Both terms are used to describe a device that measures and converts torque, which is the rotational equivalent of linear force, into an electrical signal that can be read and analyzed. The term "sensor" emphasizes the device's role in detecting or measuring torque, while "transducer" highlights its function in converting the physical quantity (torque) into an electrical signal. In practical usage, the terms are often used interchangeably.

Product reviews
Accurate and reliable force torque sensor
5
Lyla
Avatar
5/8/2025 6:41 PM
This force torque sensor performs very well, with stable and very accurate feedback data. It has a short response time and can maintain good linear output even under high-frequency dynamic tests, fully meeting the needs of high-precision measurement. The installation interface is standard, easy to integrate, and seamlessly connected to the system communication.
Was this review helpful? Yes No (0/0)
Load cell weight
5
Goha
Avatar
11/23/2025 7:45 PM
What is the weight of this sensor? I need to purchase it. What is the load range?
Was this review helpful? Yes No (0/0)
ATO Responded
Our company's SKU: ATO-TQS-105 load cell, with capacities of 20Nm and 30Nm, weighs approximately 1.53 kg.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Flanged force torque sensor for sale online. This torque transducer is available with high accuracy, strong anti-interference ability, IP65 protection level and 0-20/30/50/100/200 Nm capacity, which can be used to measure static, non-continuous rotating torque value.

Specifications

ModelATO-DYJN-105
Capacity0-200 N.m
Rated Output1.5±0.5%
Zero Balance±0.5%F.S.
Non-Linearity±0.5%F.S.
Hysteresis±0.5%F.S.
Repeatability±0.5%F.S.
Creep0.3%F.S.(30min)
Temp Effect on Output0.3%F.S./10°C
Temp Effect on Zero0.1%F.S./10°C
Response Frequency10kHz
MaterialAluminum alloy/alloy steel
Impedance700±5Ω
Insulation≥5000MΩ/100V DC
Working Voltage5-15V
Operating Temp Range-20°C-80°C
Safe Overload150%
Maximum Overload200%
Cable Specifications3x2m
Cable Ultimate Pull10kg
TEDSContact us


Dimension (Unit: mm)

Static torque sensor dimension

Sensor Wiring Diagram

Static torque sensor wiring diagrams

Sensor Force Diagram

Static torque sensor force diagrams

Applications

Static torque sensor applications

Tips: Is a torque sensor the same as a torque transducer?

Yes, a torque sensor and a torque transducer refer to the same type of device. Both terms are used to describe a device that measures and converts torque, which is the rotational equivalent of linear force, into an electrical signal that can be read and analyzed. The term "sensor" emphasizes the device's role in detecting or measuring torque, while "transducer" highlights its function in converting the physical quantity (torque) into an electrical signal. In practical usage, the terms are often used interchangeably.

Product reviews
Accurate and reliable force torque sensor
5
Lyla
Avatar
5/8/2025 6:41 PM
This force torque sensor performs very well, with stable and very accurate feedback data. It has a short response time and can maintain good linear output even under high-frequency dynamic tests, fully meeting the needs of high-precision measurement. The installation interface is standard, easy to integrate, and seamlessly connected to the system communication.
Was this review helpful? Yes No (0/0)
Load cell weight
5
Goha
Avatar
11/23/2025 7:45 PM
What is the weight of this sensor? I need to purchase it. What is the load range?
Was this review helpful? Yes No (0/0)
ATO Responded
Our company's SKU: ATO-TQS-105 load cell, with capacities of 20Nm and 30Nm, weighs approximately 1.53 kg.
Only registered users can write reviews
Customers who bought this item also bought

6 Digit Display Controller for Load Cells

ATO-DPM-DY800
$327.09
6 digit display controller can be used with load cells, force sensors and weighing sensors, 4-20mA or 0-10V transmitting signal output. This digital panel meter can display gross, net, peak and valley value alternately. Software with RS485 communication cable allows you to log the data on a PC.

Electromagnetic Brake, DC 24V, 25Nm/400Nm

ATO-EB-FBD2
$179.69
Cost-effective electromagnetic shaft brake for sale, with compact design, static torque can choose 400Nm, 200Nm, 100Nm, 50Nm to 6Nm, rated voltage DC 24V, electromagnetic brake can be used in wet or dry environment.

Digital Rotary Torque Sensor, 0.1/5/300/1000 Nm to 10000 Nm

ATO-TQS-D03
$939.15
Digital rotary torque sensor with LCD display has the capacity range from 0.1 Nm/0.3 Nm/1 Nm/5 Nm/10 Nm/300 Nm/1000 Nm to 10000 Nm. LCD display can show torque, speed and power value at the same time. Dynamic torque sensor adopts two NSK shafts to ensure starting torque as low as 0.00001 Nm. Rotary torque transducer with 7 pin waterproof circular connector and 3m cable can measure both forward and reverse torque, and then output ±5V/0-10V/4-20mA/RS485 torque signal to PLC.

Miniature Torque Sensor for Static Torque, 20Nm-200Nm

ATO-TQS-ST
$318.15
Miniature static torque sensor features a compact structure, high accuracy with 0.2% F·S nonlinearity and lightweight corrosion-resistant aluminum alloy. Available in 20 N·m–200 N·m ranges, this torque sensor is perfect for static testing on testing machines, torque wrenches, valves and actuators. Shop now for reliable torque measurement solutions.