DC 24V electromagnetic brake having features quick response, high heat dissipation, max speed 1800r/min, static torque 6Nm, 15Nm, 25Nm, 50Nm, 100Nm, 200Nm, 400Nm is optional.
Specification:
| Model | ATO-FBD-2-006 | ATO-FBD-2-015 | ATO-FBD-2-025 | ATO-FBD-2-050 | ATO-FBD-2-100 | ATO-FBD-2-200 | ATO-FBD-2-400 |
| Static Torque[kgf-m](N-m) | 0.6 (6) | 1.5 (15) | 2.5 (25) | 5.0 (50) | 10 (100) | 20 (200) | 40 (400) |
| Dynamic Torque[kgf-m](N-m) | 0.5 (5) | 1.0 (10) | 2.0 (20) | 4.0 (40) | 8 (80) | 16 (160) | 32 (320) |
| Rated Voltage | DC 24V | ||||||
| Power (W) at DC 24V, 20℃, no load | 11 | 15 | 20 | 25 | 35 | 45 | 60 |
| Weight | 0.32 | 0.58 | 1.07 | 1.97 | 3.45 | 7.1 | 12.2 |
| Maximum Speed (r/min) | 1800 | ||||||
| Document | Download Electromagnetic Brake Installation Manual | ||||||
Electromagnetic Brake Dimension (Unit=mm)
| Model | ATO-FBD2-006 | ATO-FBD2-015 | ATO-FBD2-025 | ATO-FBD2-050 | ATO-FBD2-100 | ATO-FBD2-200 | ATO-FBD2-400 | |
| Radius | A1 | 63 | 80 | 100 | 125 | 160 | 200 | 250 |
| A2 | 46 | 60 | 76 | 95 | 120 | 158 | 210 | |
| A3 | 34.5 | 41.5 | 51.5 | 61.5 | 79.5 | 99.5 | 124.5 | |
| C1 | 80 | 100 | 125 | 150 | 190 | 230 | 290 | |
| C2 | 72 | 90 | 112 | 137 | 175 | 215 | 270 | |
| C3 | 35 | 42 | 52 | 62 | 80 | 100 | 125 | |
| V1 | 3-3.1 | 3-4.1 | 3-5.1 | 3-6.1 | 3-8.1 | 3-10.2 | 3-12.2 | |
| V2 | 3-6.3 | 3-8 | 3-10.5 | 3-12 | 3-15 | 3-18 | 4-22 | |
| V3 | 3-6 | 3-7 | 3-9 | 3-10.5 | 3-14 | 3-17 | 4-19 | |
| D (Hole Dimension) | 15 | 20 | 25 | 30 | 40 | 50 | 60 | |
| E | 26 | 31 | 41 | 49 | 65 | 83 | 105 | |
| Shaft | Y | 5 | 6 | 7 | 7 | 9.5 | 9.5 | 11.5 |
| H | 18 | 20 | 22 | 24 | 26 | 30 | 35 | |
| J | 3.5 | 4.3 | 5 | 5.5 | 6 | 7 | 8 | |
| K | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | |
| L | 22 | 24.5 | 28 | 31 | 35 | 41.5 | 48 | |
| L1 | 37 | 44.5 | 53 | 61 | 73 | 86.5 | 102 | |
| L2 | 25.5 | 28.5 | 33 | 37 | 42 | 50.5 | 59 | |
| M | 15 | 20 | 25 | 30 | 38 | 45 | 54 | |
| P | 7.5 | 8 | 9 | 9 | 11.5 | 13 | 15.5 | |
| T | 6 | 8 | 10 | 12 | 15 | 18 | 22 | |
| X | 1.5 | 1.8 | 2.1 | 2.8 | 3.4 | 4.5 | 5.1 | |
| Z | 6-60° | 8-45° | ||||||
| m | 2-M4 | 2-M5 | 2-M6 | 2-M8 | 2-M10 | |||
| a | 0.2(±0.05) | 0.3+0.05-0.1 | 0.5-0-0.2 | |||||
| b | 5 | 5 | 7 | 7 | 10 | 12 | 15 | |
| t | 2.3 | 2.3 | 3.3 | 3.3 | 3.8 | 3.8 | 5 | |
Electromagnetic brake applications
Tips: Stepper motor brake selection requirements
The braking speed is determined based on the ratio of the speed of the motor to the final required output speed and the ratio of the torque to motor torque that ultimately needs to be output and the ratio of the mechanical moment of inertia to the moment of inertia of the motor.
- Torque, the torque required to be output by the servo motor is calculated according to the load structure and weight and the rotational speed.
- Moment of inertia, this parameter is related to the running precision of the servo on the mechanical structure. Generally, there is a certain margin, that is, the safety factor, calculated by the weight of the load structure.
- Rated load capacity, the final output torque should not be greater than the rated torque of the servo motor brake, otherwise the wear and tear on the servo motor brake will increase, and even affect the normal operation of the servo motor brake.
- Accuracy, the accuracy of servo motor brakes is not equal in different machinery industries. In this case, you need to understand the product model you need, and select the appropriate accuracy requirements according to the company's selection list and selection parameters.
Product reviews
What is the service life of ATO-FBD2-025 electromagnetic brake?
Christian
4/14/2020 8:03 PM
We are looking at your ATO-FBD2-025 electromagnetic brake and I’m wondering what the lifetime of the brake would be if I was overdriving it (i.e. having the brake on but still spinning at 300 rpm). I want the brake to hold at 20Nm (the dynamic Torque listed) but I still want to be able to overdrive it sometimes, I’m assuming this would wear down the brake so I want an idea of the lifetime under these circumstances..
Was this review helpful? (0/0)
Using this electromagnetic brake incorrectly?
Abys
5/27/2022 12:27 AM
I recently purchased an electromagnetic brake from you. After applying 24V to engage the magnet, when I remove the 24V, the brake still is holding and is very difficult to release. I'm wondering if there is anything I can do this fix this or if I am using it incorrectly?
Was this review helpful? (0/0)
Can you confirm the shaft size for this electromagnetic brake?
vance
6/6/2023 3:31 AM
Can you confirm the shaft size for this?
To me it looks like it’s 15mm on the website, but I’m not seeing that on the print.
To me it looks like it’s 15mm on the website, but I’m not seeing that on the print.
Was this review helpful? (0/0)
Can brake and clutch combination meet my needs?
xiu
8/27/2023 9:34 PM
ATO-PBO and ATO-EB-FBD2 are brakes. ATO-PC is a clutch.
For my project, I want to use a clutch to stop power flowing to the output shaft, and then use a brake to slow the output down.
Would a combination of these be able to do that?
For my project, I want to use a clutch to stop power flowing to the output shaft, and then use a brake to slow the output down.
Would a combination of these be able to do that?
Was this review helpful? (0/0)
Proportional braking?
Miguel
5/19/2024 1:31 PM
Would it be possible to vary the braking action using a rheostat?
Was this review helpful? (0/0)
Brakes Required
Debbies
3/16/2026 1:14 AM
Hello, I need to equip my robot with brakes. Do you have any recommendations?
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
Force Torque Sensor, Flange, 0-20/30/50/100/200 Nm
ATO-TQS-105
$246.19
High precision force torque sensor is a static torque transducer, comes with flange mounting, IP65 protection level, 0-20/30/50/100/200 Nm capacity, suitable for mechanical arm joint torque force measurement, force detection, force value analysis tester and other torque force testing instruments.