Reaction Torque Sensor for Torque Wrench Calibration, 5-200 Nm

$165.61
Reaction torque sensor is a special static torque sensor for torque wrench calibration. Torque sensor has one end of flange and the other end of square groove. Reaction torque transducers have a capacity range from 5 Nm/10 Nm/20 Nm/50 Nm/100 Nm to 200 Nm, 120%FS safety overload, and can measure both forward and reverse torque.
SKU: ATO-TQS-S02
*
*
Free Shipping
Delivery date: 6-12 days

Torque sensors have capacity range from 5 Nm, 10 Nm, 20 Nm, 50 Nm, 100 Nm to 200 Nm. Torque sensor capacity can be customized according to customer requirements.

After purchasing one ATO torque sensor, you can buy a special digital controller to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0~5V, 0~10V, 0~±10V, or 4-20mA.

Specification

ModelATO-DYJN-102
Shipping Weight2kg
Capacity Range *0-5 Nm ~ 0-200 Nm
Sensitivity1.0-2.0mV/V
With TransmitterATO-LCTR-OA
Zero Balance±2%FS
Non-linearity0.2%FS
Hysteresis0.05%FS
Repeatability0.05%FS
Creep0.05%FS/30min
Temperature Drift on Zero<0.05%F.S/10℃
Temperature Effect on Output<0.05%F.S/10℃
Operating Temperature-20℃~+80℃
Humidity0~90%RH
Impedance350Ω
Insulation Resistance≥5000MΩ/100VDC
Stability0.3%FS/year
Safety Overload120%F.S
Ultimate Overload150%F.S
Excitation VoltageDC 5-15V
MaterialAlloy steel
Protection ClassIP65
Electrical Connection5 pin circular connector (Packing included)
Cable Length3m (Φ3mm) (Packing included)
WiringEXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


Torque Sensor Dimension (unit: mm)

Reaction torque sensor for torque wrench calibration 20-500 Nm

Feature

Reaction torque sensor 20 to 500nm feature

  • 42CrMo alloy steel material with good hardenability and strong mechanical fatigue resistance.
  • Industrial high-precision strain gauges have high measurement accuracy, small creep, small thermal hysteresis and good long-term stability.
  • Aviation plug is ready to plug and unplug, convenient and quick, can ensure the transmission signal high speed and stability.

Torque Sensor Force Point

Reaction torque sensor 20 to 500nm force point

Application

Reaction torque sensor 20 to 500nm applications

Tips: Torque sensor fails to return to zero after unloading

There are two conditions if the torque sensor fails to return to zero after installation or unloading the load. The first is the torque sensor connection. The second is overload.

If the reaction torque sensor still displays the value of 0.1-1 Nm after loading and unloading, it is usually caused by the inconsistent stopping positions of the power terminal and load terminal in the measurement process. Remove the torque sensor and inspect the sensor signal zero point. If it is normal, it is indeed caused by the inconsistent stopping positions of the power terminal and load terminal.

If the sensor zero point fails to go back to zero when the torque sensor is overloaded, the torque display is inaccurate in the measurement process, and the zero point still doesn't go back to zero after dismantling the sensor, such a condition can be basically confirmed to be caused by the overloaded sensor.

The fundamental reason is that the selected range of the sensor is inaccurate or smaller. In normal conditions, in selecting the sensor range, it should be 1.5 times-2 times of the maximum torque value on site. For instance, if the on-site power terminal is the motor, the motor power is 6Kw and the revolving speed is 1500, then the torque should be 38.19N.m after the conversion, and the torque sensor range should be 1.5 times to 2 times of the maximum torque value, because the moment torque in starting the motor is very high, generally higher than the rated torque of the motor.

In this video, ATO will show you top ten most used sensors (sensing technologies).

Product reviews
Minimum resolution of torque sensor
5
Brucem
Avatar
8/31/2021 3:37 AM
My name is Erlantz Otaola and write on behalf of added value solutions, a company devoted to develop mechantronic equipment for big science and space. Currently, we are looking for a torque meter for a bench we are developing. This torque meter should measure up to 300 Nm with a minimum resolution of 0.1Nm. Looking at your page, we have come across with the digital rotary torque sensor, which seems to fit our purpose. However, we would very much appreciate your assessment on this. Besides, we would like to know the price and lead time for the digital rotary torque sensor or any other you consider that fits better our application.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, our ATO-TQS-D03 torque sensor be able to measure up to 300 Nm with a minimum resolution of 0.1Nm when the measuring range is 0.1Nm.
More suitable for our torque sensor
5
Hamish
Avatar
9/16/2021 7:54 PM
My name is Erlantz Otaola and I write on behalf of added value solutions, a company devoted to developing monitoring equipment for big science and space. Currently, we are looking for a torque meter for a bench we are developing. This torque meter should measure up to 300 mNm with a minimum resolution of 0.1mNm. Looking at your page, we have come across the digital rotary torque sensor, which seems to fit our purpose. However, we would very much appreciate your assessment of this. Besides, we would like to know the price and lead time for the digital rotary torque sensor or any other you consider that fits our application better.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, our ATO-TQS-D03 torque sensor is able to measure up to 300 mNm with a minimum resolution of 0.1mNm when the measuring range is 0.1NM.
Usually the measurement resolution is 1/1000 of the measuring range. So, what is the measuring range for customer requirements?
Looking forward to your reply to my question.
5
Yurs
Avatar
1/4/2022 7:42 PM
With reference to the quote you sent me.
What is the smallest resolution for the 20Nm rotary sensor?
What is the smallest resolution for the 30Nm rotary sensor?
Why did you recommend 30 Nm sensor over 20Nm if the max torque is below 10Nm? Please explain.
Will the converter board I am buying have USB output? If so, will it work with the software I am buying?
Looking forward to your reply,
Craig Coad
GiG, LLC
Was this review helpful? Yes No (0/0)
ATO Responded
1. The capacity of the torque sensor is generally recommended to use 2 times of the range, because the torque force has impact, the measurement range of the sensor should have a margin will be better.
2. Yes, we will provide software, including a USB-485 communication cable.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Torque sensors have capacity range from 5 Nm, 10 Nm, 20 Nm, 50 Nm, 100 Nm to 200 Nm. Torque sensor capacity can be customized according to customer requirements.

After purchasing one ATO torque sensor, you can buy a special digital controller to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0~5V, 0~10V, 0~±10V, or 4-20mA.

Specification

ModelATO-DYJN-102
Shipping Weight2kg
Capacity Range *0-5 Nm ~ 0-200 Nm
Sensitivity1.0-2.0mV/V
With TransmitterATO-LCTR-OA
Zero Balance±2%FS
Non-linearity0.2%FS
Hysteresis0.05%FS
Repeatability0.05%FS
Creep0.05%FS/30min
Temperature Drift on Zero<0.05%F.S/10℃
Temperature Effect on Output<0.05%F.S/10℃
Operating Temperature-20℃~+80℃
Humidity0~90%RH
Impedance350Ω
Insulation Resistance≥5000MΩ/100VDC
Stability0.3%FS/year
Safety Overload120%F.S
Ultimate Overload150%F.S
Excitation VoltageDC 5-15V
MaterialAlloy steel
Protection ClassIP65
Electrical Connection5 pin circular connector (Packing included)
Cable Length3m (Φ3mm) (Packing included)
WiringEXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


Torque Sensor Dimension (unit: mm)

Reaction torque sensor for torque wrench calibration 20-500 Nm

Feature

Reaction torque sensor 20 to 500nm feature

  • 42CrMo alloy steel material with good hardenability and strong mechanical fatigue resistance.
  • Industrial high-precision strain gauges have high measurement accuracy, small creep, small thermal hysteresis and good long-term stability.
  • Aviation plug is ready to plug and unplug, convenient and quick, can ensure the transmission signal high speed and stability.

Torque Sensor Force Point

Reaction torque sensor 20 to 500nm force point

Application

Reaction torque sensor 20 to 500nm applications

Tips: Torque sensor fails to return to zero after unloading

There are two conditions if the torque sensor fails to return to zero after installation or unloading the load. The first is the torque sensor connection. The second is overload.

If the reaction torque sensor still displays the value of 0.1-1 Nm after loading and unloading, it is usually caused by the inconsistent stopping positions of the power terminal and load terminal in the measurement process. Remove the torque sensor and inspect the sensor signal zero point. If it is normal, it is indeed caused by the inconsistent stopping positions of the power terminal and load terminal.

If the sensor zero point fails to go back to zero when the torque sensor is overloaded, the torque display is inaccurate in the measurement process, and the zero point still doesn't go back to zero after dismantling the sensor, such a condition can be basically confirmed to be caused by the overloaded sensor.

The fundamental reason is that the selected range of the sensor is inaccurate or smaller. In normal conditions, in selecting the sensor range, it should be 1.5 times-2 times of the maximum torque value on site. For instance, if the on-site power terminal is the motor, the motor power is 6Kw and the revolving speed is 1500, then the torque should be 38.19N.m after the conversion, and the torque sensor range should be 1.5 times to 2 times of the maximum torque value, because the moment torque in starting the motor is very high, generally higher than the rated torque of the motor.

Product reviews
Minimum resolution of torque sensor
5
Brucem
Avatar
8/31/2021 3:37 AM
My name is Erlantz Otaola and write on behalf of added value solutions, a company devoted to develop mechantronic equipment for big science and space. Currently, we are looking for a torque meter for a bench we are developing. This torque meter should measure up to 300 Nm with a minimum resolution of 0.1Nm. Looking at your page, we have come across with the digital rotary torque sensor, which seems to fit our purpose. However, we would very much appreciate your assessment on this. Besides, we would like to know the price and lead time for the digital rotary torque sensor or any other you consider that fits better our application.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, our ATO-TQS-D03 torque sensor be able to measure up to 300 Nm with a minimum resolution of 0.1Nm when the measuring range is 0.1Nm.
More suitable for our torque sensor
5
Hamish
Avatar
9/16/2021 7:54 PM
My name is Erlantz Otaola and I write on behalf of added value solutions, a company devoted to developing monitoring equipment for big science and space. Currently, we are looking for a torque meter for a bench we are developing. This torque meter should measure up to 300 mNm with a minimum resolution of 0.1mNm. Looking at your page, we have come across the digital rotary torque sensor, which seems to fit our purpose. However, we would very much appreciate your assessment of this. Besides, we would like to know the price and lead time for the digital rotary torque sensor or any other you consider that fits our application better.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, our ATO-TQS-D03 torque sensor is able to measure up to 300 mNm with a minimum resolution of 0.1mNm when the measuring range is 0.1NM.
Usually the measurement resolution is 1/1000 of the measuring range. So, what is the measuring range for customer requirements?
Looking forward to your reply to my question.
5
Yurs
Avatar
1/4/2022 7:42 PM
With reference to the quote you sent me.
What is the smallest resolution for the 20Nm rotary sensor?
What is the smallest resolution for the 30Nm rotary sensor?
Why did you recommend 30 Nm sensor over 20Nm if the max torque is below 10Nm? Please explain.
Will the converter board I am buying have USB output? If so, will it work with the software I am buying?
Looking forward to your reply,
Craig Coad
GiG, LLC
Was this review helpful? Yes No (0/0)
ATO Responded
1. The capacity of the torque sensor is generally recommended to use 2 times of the range, because the torque force has impact, the measurement range of the sensor should have a margin will be better.
2. Yes, we will provide software, including a USB-485 communication cable.
Only registered users can write reviews
Customers who bought this item also bought

Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

ATO-LCTR-OA
$81.27
Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.

Micro Reaction Torque Sensor for Static Torque, 0.5-150 Nm

ATO-TQS-S04
$175.93
Micro torque sensor is a reaction torque sensor for static torque measurement. Torque sensor is made of aluminium alloy, 150%FS safety overload, -20°C~+80°C operating temperature, low price. Reaction torque transducers have a capacity range from 0.5 Nm ~ 150 Nm and can measure both forward and reverse torque.

Digital Load Cell Amplifier, Output 4-20mA/0-10V/RS485

ATO-LCTR-OAR
$109.85
High precision load cell amplifier has a 6 digit LED display, output signal 4-20mA/ 0-5V/ 0-10V/ RS485. There are 3 keys for parameter settings. Digital load cell amplifier can be calibrated on-line by its 3 keys. The setting parameters include zero, capacity, communication rate, division value, decimal digits, etc.