50A High Voltage DC Contactor, 12V/24V coil

$111.85
High voltage DC contactor, normally open type (SPST-NO), 50 amps rated load current of contact circuit, available with 12V or 24V coils, the connection of contact and coil need to be nonpolarity. It is widely used in the DC high voltage field, such as electric car, wind power generation, DC power supply control system and so on.
SKU: ATO-DCCON-HV50
*
Free Shipping
Delivery date: 6-12 days

Features

  • DC 12-900V rated load voltage of contact circuit.
  • SPST-NO of contact form, 12 volt, 24 volt coil for selecting.
  • Main contact voltage drop at 50A, not above 100mV.
  • The connection of contact and coil need to be nonpolarity.
  • Efficient coil, retentive power is only 2-2.3W, counter electromotive force is 0V.
  • The joint way of the coil is very convenient.
  • The coil has no counter force of electromagnetism.
  • Compare to the similar products, this product is smallest and lightest.

Specifications

BasicsModelATO-ADH50
Dimension55 x 42 x 62 mm
Weight230 g
Main Contact ParametersContact Form1 NO
Leading-OutM5 internal thread/18 mm
Rated Load Current50 A
Rated Load Voltage12 – 900V DC
Maximum Switching Current500A 320V DC (≥1 times)
Maximum Switching Power160 kW
Rated Electric Life10,000 times
Coil ParametersStandard Type Voltage12V DC24V DC
Work Voltage9~16V18~32 V
Max Voltage16 V32 V
Coil Resistance26 Ω96 Ω
Average Holding Current0.46 A0.25 A
Steady State Power5.5 W6 W
Actuation Time≤25 ms
Release Time≤10 ms
Bounce Time≤5 ms
Mechanical SpecificationStability196 m/s2 (20G)
Strength490 m/s2 (50G)
Vibration80 ~2000Hz 98m/s2 (20G)
IP GradeIP67
EnvironmentOperating Temperature-40℃~85℃
Operating Humidity5~95% RH

Installation Diagram (Unit: mm)
High voltage 50a dc contactor dimension 1
high voltage 50a dc contactor dimension 2High Voltage DC Contactor Coil Schematic
high voltage dc contactor coil-schematic

Details

50A High Voltage DC Contactor Details

Tips: Fusion welding of the contactor due to electric shock, how to solve?

Possible causes of the fault:

  • short circuit of contactor on the load side.
  • Overload use of contactor contact.
  • There’s a foreign body or a metal particle on the surface of the contact.
  • Pressure of the contact spring is too small.
  • Poor contact of contactor's lines, which makes the contactor repeatedly pull in and release at a moment.

Maintenance method:

  1. Power off at first, separate the welding contacts with a screwdriver, correct the contact surface and eliminate the short-circuit fault.
  2. Replace with a large capacity and high quality contactor.
  3. Smooth the contact surface with a steel file and remove foreign bodies.
  4. Readjust the spring pressure.
  5. Check the bad contacts of the coil control loop of the contactor, reconnect the loop or replace electrical components, ensure a good on-off situation.
Product reviews
Does your 50A high voltage DC contactor have a gas or vacuum filled arc chamber?
5
Covfe
Avatar
11/2/2021 12:08 AM
I want to ask if your 50A high voltage DC contactor ADH150/900-E has a gas or vacuum filled arc chamber?
Was this review helpful? Yes No (0/0)
ATO Responded
Our ADH series of DC contactors have inert gas in the arc chamber.
Few questions
5
Puth
Avatar
12/10/2021 1:32 AM
1. Why does the DC version cost 20$ more? Is there a difference in the internal structure between AC coil and DC coil?
2. What are the typical open/close times?
3. The supported altitude is 2000m. Is there an option to increase it to 2500m?
Was this review helpful? Yes No (0/0)
ATO Responded
1. The DC coil version is larger, and the material is different, so the price will be higher.
2. The reaction time of contactor "typical open/close" is 0.3 second.
3. Yes, it can be used at an altitude of 2500m, but this may have a little impact on performance.
What part number should we order?
5
rayparker
Avatar
6/29/2023 7:06 PM
We need two N.O. contactors rated at 150 amps with 12-volt coils and specified to use your 200 amp, with N.O. and assuming the use of an auxiliary NO, what part number should we order?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, we do Not provide a voltage contactor for 200A. The high-voltage contactor has 200A and only one auxillary N.O, please refer to the link: https://www.ato.com/200a-high-voltage-dc-contactor-12v-24v-coil
What is the internal difference between an AC and a DC contactor?
5
niki
Avatar
7/19/2023 11:49 PM
What is the internal difference between an AC and a DC contactor?
It's just a switch why wouldn't it work because of being DC?
And I need a contactor with a 48V DC coil preferably normally closed.
Was this review helpful? Yes No (0/0)
ATO Responded
The core and coil of the internal design of the AC contactor and the DC contactor are different.
The internal coil and iron core of the AC contactor can only use AC power, and it is easy to burn out once it is used for DC voltage.
This is because the design principles of AC contactors and DC contactors are different.
If you want a DC contactor with a 48V DC coil, withstand voltage 300V DC, 32A, we recommend this 50A High Voltage DC Contactor. This contactor can be made into coil 48V DC, load voltage DC 12-900V, but the Contact Form only has 1 NO.
What kind of threads do DC contactors have?
5
quella
Avatar
7/25/2023 12:10 AM
Alright, thank you for your response.
If the main contacts do not have female M5 threads, what kind of threads do they have?
Was this review helpful? Yes No (0/0)
ATO Responded
The main contact thread of ATO-ADH30 is M4, and the main contact thread of ATO-ADH50 is M5.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • DC 12-900V rated load voltage of contact circuit.
  • SPST-NO of contact form, 12 volt, 24 volt coil for selecting.
  • Main contact voltage drop at 50A, not above 100mV.
  • The connection of contact and coil need to be nonpolarity.
  • Efficient coil, retentive power is only 2-2.3W, counter electromotive force is 0V.
  • The joint way of the coil is very convenient.
  • The coil has no counter force of electromagnetism.
  • Compare to the similar products, this product is smallest and lightest.

Specifications

BasicsModelATO-ADH50
Dimension55 x 42 x 62 mm
Weight230 g
Main Contact ParametersContact Form1 NO
Leading-OutM5 internal thread/18 mm
Rated Load Current50 A
Rated Load Voltage12 – 900V DC
Maximum Switching Current500A 320V DC (≥1 times)
Maximum Switching Power160 kW
Rated Electric Life10,000 times
Coil ParametersStandard Type Voltage12V DC24V DC
Work Voltage9~16V18~32 V
Max Voltage16 V32 V
Coil Resistance26 Ω96 Ω
Average Holding Current0.46 A0.25 A
Steady State Power5.5 W6 W
Actuation Time≤25 ms
Release Time≤10 ms
Bounce Time≤5 ms
Mechanical SpecificationStability196 m/s2 (20G)
Strength490 m/s2 (50G)
Vibration80 ~2000Hz 98m/s2 (20G)
IP GradeIP67
EnvironmentOperating Temperature-40℃~85℃
Operating Humidity5~95% RH

Installation Diagram (Unit: mm)
High voltage 50a dc contactor dimension 1
high voltage 50a dc contactor dimension 2High Voltage DC Contactor Coil Schematic
high voltage dc contactor coil-schematic

Details

50A High Voltage DC Contactor Details

Tips: Fusion welding of the contactor due to electric shock, how to solve?

Possible causes of the fault:

  • short circuit of contactor on the load side.
  • Overload use of contactor contact.
  • There’s a foreign body or a metal particle on the surface of the contact.
  • Pressure of the contact spring is too small.
  • Poor contact of contactor's lines, which makes the contactor repeatedly pull in and release at a moment.

Maintenance method:

  1. Power off at first, separate the welding contacts with a screwdriver, correct the contact surface and eliminate the short-circuit fault.
  2. Replace with a large capacity and high quality contactor.
  3. Smooth the contact surface with a steel file and remove foreign bodies.
  4. Readjust the spring pressure.
  5. Check the bad contacts of the coil control loop of the contactor, reconnect the loop or replace electrical components, ensure a good on-off situation.
Product reviews
Does your 50A high voltage DC contactor have a gas or vacuum filled arc chamber?
5
Covfe
Avatar
11/2/2021 12:08 AM
I want to ask if your 50A high voltage DC contactor ADH150/900-E has a gas or vacuum filled arc chamber?
Was this review helpful? Yes No (0/0)
ATO Responded
Our ADH series of DC contactors have inert gas in the arc chamber.
Few questions
5
Puth
Avatar
12/10/2021 1:32 AM
1. Why does the DC version cost 20$ more? Is there a difference in the internal structure between AC coil and DC coil?
2. What are the typical open/close times?
3. The supported altitude is 2000m. Is there an option to increase it to 2500m?
Was this review helpful? Yes No (0/0)
ATO Responded
1. The DC coil version is larger, and the material is different, so the price will be higher.
2. The reaction time of contactor "typical open/close" is 0.3 second.
3. Yes, it can be used at an altitude of 2500m, but this may have a little impact on performance.
What part number should we order?
5
rayparker
Avatar
6/29/2023 7:06 PM
We need two N.O. contactors rated at 150 amps with 12-volt coils and specified to use your 200 amp, with N.O. and assuming the use of an auxiliary NO, what part number should we order?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, we do Not provide a voltage contactor for 200A. The high-voltage contactor has 200A and only one auxillary N.O, please refer to the link: https://www.ato.com/200a-high-voltage-dc-contactor-12v-24v-coil
What is the internal difference between an AC and a DC contactor?
5
niki
Avatar
7/19/2023 11:49 PM
What is the internal difference between an AC and a DC contactor?
It's just a switch why wouldn't it work because of being DC?
And I need a contactor with a 48V DC coil preferably normally closed.
Was this review helpful? Yes No (0/0)
ATO Responded
The core and coil of the internal design of the AC contactor and the DC contactor are different.
The internal coil and iron core of the AC contactor can only use AC power, and it is easy to burn out once it is used for DC voltage.
This is because the design principles of AC contactors and DC contactors are different.
If you want a DC contactor with a 48V DC coil, withstand voltage 300V DC, 32A, we recommend this 50A High Voltage DC Contactor. This contactor can be made into coil 48V DC, load voltage DC 12-900V, but the Contact Form only has 1 NO.
What kind of threads do DC contactors have?
5
quella
Avatar
7/25/2023 12:10 AM
Alright, thank you for your response.
If the main contacts do not have female M5 threads, what kind of threads do they have?
Was this review helpful? Yes No (0/0)
ATO Responded
The main contact thread of ATO-ADH30 is M4, and the main contact thread of ATO-ADH50 is M5.
Only registered users can write reviews
Customers who bought this item also bought

200A High Voltage DC Contactor, 12V/24V coil

ATO-DCCON-HV200
$161.08
High voltage DC contactor, built-in energy saving coil, available with 12V or 24V DC, normally open type (SPST-NO), main contact rated load current is 200 amps, operating voltage up to 1000V, maximum switching power up to 640 kW.

50A DC Reversing Contactor, 2 pole, 12V/24V/48V

ATO-DCCON-R50
$74.31
Two pole DC reversing contacor with 2 sets of switching contacts, 2NO and 2NC form, 50 amps rated load current of contact circuit, coil rated voltage with 12V/24V/48V DC for selection. Cheap price and manufacturer direct sale.

DC Voltage Monitoring Relay, Under/Over Voltage, 12V/24V/48V DC

ATO-MR-DVRD
$105.98
DC voltage monitoring relay with 2 C/O contacts (2 Form C or DPDT) provide protection for the equipment from undervoltage and overvoltage in DC circuit 12V, 24V, 36V or 48V, adjustable trip delay time, LED indicator for working state, DIN rail mounting, compact design, good quality and low price.

100A DC Reversing Contactor, 2 pole, 12V/24V/48V

ATO-DCCON-R100
$126.46
Low cost reversing contacor with two interlocked contacts, to prevent the motor from running forwards and backwards simultaneously. 2 pole DC contactor with 2NO and 2NC (DPST-NO, DPST-NC) contact form, coil rated voltage with 12V/24V/48V DC for choice.

250A High Voltage DC Contactor, 12V/24V coil

ATO-DCCON-HV250
$179.54
250A rated load current, main contact normal open (SPST-NO), available with 12V or 24V DC coil, switch rated loads at both low and high voltage from 12 to 900V DC. High voltage contactors offers exceptional performance in an extremely small and lightweight device.