24V DC 8.3A 200W Switching Power Supply

$67.58
Low price switching power supply transforms the full range of AC input to a stable DC voltage of 24V at the rated power 200W and rated current 8.3A, high efficiency and high reliability SMPS ideal for LED lights, printers, computers, monitoring cameras, industrial control, etc.
SKU: ATO-SMPS-200-24
Free Shipping
Delivery date: 6-12 days

Features

  • Universal AC input range selectable by a switch
  • Protections: short circuit, overload and overvoltage
  • Cooling by free air convection
  • LED indicator for power on
  • 100% full load burn-in test
  • Low cost and high reliability

Specification

ModelATO-S-200-24
Output
DC Voltage24V
Rated Current8.3A
Current Range0 ~ 8.3A
Rated Power200W
Ripple & Noise (Max.)(Note 2)100mVp-p
Voltage Adjust Range21 ~ 28V
Voltage Tolerance (Note 3)±1.0%
Line Regulation±0.5%
Load Regulation±0.5%
Setup, Rise, Holdup Time100ms, 50ms, 20ms at full load
InputVoltage Range88 ~ 132VAC/176V~264VAC (selected by a switch) or 255 ~ 370VDC
Frequency Range47~63Hz
Efficiency (Typ.)85%
AC Current (Typ.)3.2A/115V AC 1.6A/230V AC
Inrush Current (Typ.)Cold start: 35A
Leakage Current<3.5mA/240V AC
ProtectionOverload105~150% rated output power
Protection type: Shut down output voltage, re-power on to recover.
Overvoltage30~34.8V
Protection type: Shut down output voltage, re-power on to recover.
EnvironmentWorking Temperature-10 ~ +60℃
Working Humidity20~90% RH non-condensing
Storage Temperature-20~+85℃
Storage Humidity10~95% RH non-condensing
Temperature Coefficient±0.03%/℃ (0~50℃)
Vibration10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4)Safety StandardsUL1012 Approved
Withstand VoltageI/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH
EMC EmissionCompliance to FCC Part 15 J conduction Class B
EMC ImmunityCompliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, light industry level, criteria A
OthersMTBF≥286.7K hrs MIN. MIL-HDBK-217F (25℃)
Dimension199*110*50mm (L*W*H)
Weight0.8kg
Note1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.
4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives.

Dimensions (Unit: mm)

150W switch-mode power supply dimensionSMPS terminal pin number assignment

Details

24V Switching Power Supply Details

SMPS Power Supply Applications

  • Power Tools
    Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc.
  • Offices Devices
    Computer, Printer, LCD Monitor, Scanning Machine, etc.
  • Electrics & Household Appliance
    TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge/Freezr, Coffemarker, etc.
  • Industrial Equipemnt
    Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.

Tips: Troubleshooting switching power supply (SMPS)

1. There is voltage output, but the voltage remains too high.

This SMPS malfunction is mainly caused by regulated sampling circuit and regulated control circuit. DC output, sampling resistance, error sampling amplifier (such as TL431), opt coupler, and control circuit of power supply form up a closed control circuit. Any problem at the circuit will lead to over tension of the output voltage.

2. Poor load capacity

Poor load capacity is a common malfunction of switching power supply. It is often seen at traditional power supplies or those which work for long hours. It is caused by aging components, unstable switch tube, or poor cooling condition. Users shall check and confirm the status of regulated diode, rectifier diode and HV smoothing capacitor etc.

Product reviews
A satisfactory 200W switching power supply
5
Rowan
Avatar
8/5/2025 8:08 PM
I recently purchased this 200W switch power supply to power my 24V LED lights and surveillance system. I'm very satisfied with its performance. This switching power supply can stably output 24V DC within the full voltage range, with a current of up to 8.3A, making it highly suitable for devices with high power demands. There has been almost no voltage fluctuation during the entire operation, demonstrating excellent stability and reliability. The installation is also very convenient. Despite its compact size, it is well-made and the fan noise is not significant, fully meeting both industrial and household needs. In summary, this is a highly cost-effective SMPS, and I recommend it to users who need an efficient and stable power supply.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • Universal AC input range selectable by a switch
  • Protections: short circuit, overload and overvoltage
  • Cooling by free air convection
  • LED indicator for power on
  • 100% full load burn-in test
  • Low cost and high reliability

Specification

ModelATO-S-200-24
Output
DC Voltage24V
Rated Current8.3A
Current Range0 ~ 8.3A
Rated Power200W
Ripple & Noise (Max.)(Note 2)100mVp-p
Voltage Adjust Range21 ~ 28V
Voltage Tolerance (Note 3)±1.0%
Line Regulation±0.5%
Load Regulation±0.5%
Setup, Rise, Holdup Time100ms, 50ms, 20ms at full load
InputVoltage Range88 ~ 132VAC/176V~264VAC (selected by a switch) or 255 ~ 370VDC
Frequency Range47~63Hz
Efficiency (Typ.)85%
AC Current (Typ.)3.2A/115V AC 1.6A/230V AC
Inrush Current (Typ.)Cold start: 35A
Leakage Current<3.5mA/240V AC
ProtectionOverload105~150% rated output power
Protection type: Shut down output voltage, re-power on to recover.
Overvoltage30~34.8V
Protection type: Shut down output voltage, re-power on to recover.
EnvironmentWorking Temperature-10 ~ +60℃
Working Humidity20~90% RH non-condensing
Storage Temperature-20~+85℃
Storage Humidity10~95% RH non-condensing
Temperature Coefficient±0.03%/℃ (0~50℃)
Vibration10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4)Safety StandardsUL1012 Approved
Withstand VoltageI/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH
EMC EmissionCompliance to FCC Part 15 J conduction Class B
EMC ImmunityCompliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, light industry level, criteria A
OthersMTBF≥286.7K hrs MIN. MIL-HDBK-217F (25℃)
Dimension199*110*50mm (L*W*H)
Weight0.8kg
Note1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.
4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives.

Dimensions (Unit: mm)

150W switch-mode power supply dimensionSMPS terminal pin number assignment

Details

24V Switching Power Supply Details

SMPS Power Supply Applications

  • Power Tools
    Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc.
  • Offices Devices
    Computer, Printer, LCD Monitor, Scanning Machine, etc.
  • Electrics & Household Appliance
    TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge/Freezr, Coffemarker, etc.
  • Industrial Equipemnt
    Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.

Tips: Troubleshooting switching power supply (SMPS)

1. There is voltage output, but the voltage remains too high.

This SMPS malfunction is mainly caused by regulated sampling circuit and regulated control circuit. DC output, sampling resistance, error sampling amplifier (such as TL431), opt coupler, and control circuit of power supply form up a closed control circuit. Any problem at the circuit will lead to over tension of the output voltage.

2. Poor load capacity

Poor load capacity is a common malfunction of switching power supply. It is often seen at traditional power supplies or those which work for long hours. It is caused by aging components, unstable switch tube, or poor cooling condition. Users shall check and confirm the status of regulated diode, rectifier diode and HV smoothing capacitor etc.

Product reviews
A satisfactory 200W switching power supply
5
Rowan
Avatar
8/5/2025 8:08 PM
I recently purchased this 200W switch power supply to power my 24V LED lights and surveillance system. I'm very satisfied with its performance. This switching power supply can stably output 24V DC within the full voltage range, with a current of up to 8.3A, making it highly suitable for devices with high power demands. There has been almost no voltage fluctuation during the entire operation, demonstrating excellent stability and reliability. The installation is also very convenient. Despite its compact size, it is well-made and the fan noise is not significant, fully meeting both industrial and household needs. In summary, this is a highly cost-effective SMPS, and I recommend it to users who need an efficient and stable power supply.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Curved Jaw Coupling, 120 x 160mm

ATO-SC-GFCG-120160
$789.37
Curved Jaw Coupling featuring an outer diameter of 120mm and a length of 160mm, rated torque of 1040 Nm and a maximum allowable speed of 5200 RPM. ATO curved jaw coupling is highly versatile and compatible with a wide range of shaft sizes and types.

Electromagnetic Relay, DPDT, 12/24/110/220V coils

ATO-EMR-HH52P
$52.99
Electromagnetic relay features with 8 pins, DPDT(Double Pole Double Throw), clear and plastic housing. The coil voltages of 12V DC, 24VDC, 110V AC and 220V AC are available with contact load 5A/240V AC 28V DC and widely used in automatic control system.

Magnetic Particle Brake, Single Shaft, 3Nm-400Nm

ATO-PB
$319.89
Magnetic particle brake, single shaft, rated torque can select 6Nm, 12Nm, 25Nm, 50Nm, 100Nm, 200Nm or 400Nm, maximum rated speed of 1800rpm, with maintain, braking, buffer start, tension control and torque limit. Electric brake has the advantages of quick response, simple structure, no shock vibration and energy saving. Manufacturer direct sales.

Manual Tension Controller for Magnetic Powder Clutch/Brake

ATO-TC-001
$101.98
Compact manual tension controller with an output voltage of 24V DC, providing current for excitation powder clutch/brake, hysteresis clutch/brake, etc. Manual tension controller is suitable for slitting machines, printing machines, and other equipment requiring channel tension control or cable processing.

Digital Manual Tension Controller For Magnetic Particle Clutch/Brake

ATO-TC-002
$234.98
Low price digital display tension controller with highly adaptable switching power supply, beautiful, intuitive display, external signal control 0~10VDC, input power AC85V~264V, frequency 50/60Hz, is ideal for magnetic powder clutch/brake.