Electromagnetic Relay, DPDT, 12/24/110/220V coils

$52.99
Electromagnetic relay features with 8 pins, DPDT(Double Pole Double Throw), clear and plastic housing. The coil voltages of 12V DC, 24VDC, 110V AC and 220V AC are available with contact load 5A/240V AC 28V DC and widely used in automatic control system.
SKU: ATO-EMR-HH52P
*
Free Shipping
Delivery date: 2-12 days

8-pin DPDT electromagnetic relay is in small size, easy to drive and has a wide range of applications like electronic equipment, household appliances, office automation etc.

Specification

BasicsModelATO-HH52P/MY2NJ (Relay with Socket)
Dimension (L*W*H)27×21×35mm
Weight30g
Ambient Temperature-25℃~+55℃
Terminal TypePlug-in
Number of Pins8
Technical ParametersContact FormDPDT (2 Form C)
Contact MaterialSilver alloy
Contact Capacity (Resistive load)5A/28V DC, 5A/240V AC
Coil PowerDC≤0.9W, AC≤1.2VA
Coil Voltage (Optional)12V DC, 24VDC, 110V AC, 220V AC
Pick-up Voltage at 23℃DC≤75%, AC≤80%
Drop-out Voltage at 23℃DC≥10%, AC≥30%
Contact Resistance @6V DC 1A≤100MΩ
Dielectric StrengthBetween open contact≥1000V AC 50Hz/1min
Between adjacent contact≥1000V AC 50Hz/1min
Between coil & contact≥1500VAC 50Hz/1min
Leakage current≤1mA
Insulation Resistance (MΩ)≥500MΩ at 500V DC
Service lifeElectrical105 Times (Frequency: On 1 Time/1s, Off 1 Time/1s)
Mechanical106 Times (Frequency: 300 Time/1min)

Note: Here just shows the contact form DPDT, and another contact forms 2NO (2 Form A) and 2NC (2 Form B) are still available. What's more, please kindly note that What's more, please kindly noted that other coil voltages are also available (DC: 6-220V; AC: 6-380V). If you have any requirments, please don't hesitate to contact us.

Dimensions & Connection Diagram
HH52PL electromangetic relay dimensions wiringDetails

Electromagnetic Relay,DPDT Details

Tips: Working principle of electromagnetic relay

Electromagnetic replay uses electromagnet to control “on” or “off” status of operating circuit. Thus how an electromagnetic relay works specifically?

Electromagnetic relay consists of electromagnet, armature, spring, movable contact and stationary contact. When applying voltage to both ends of a coil, the coil will be flowed with current and generate electromagnetic effect. The electromagnet will attract armature to the iron core against tension of spring, so as to pull the movable contact of the armature to the stationary contact (normally open contact, or NO). When users cut off power, attraction of the electromagnet will disappear and the armature will restore its position under tension of the spring to release the movable contract from the stationary contact (normally closed contract or NC). The pulling and releasing are used to control opening and closing of the circuit. Normally open and closed contacts respectively refer to the stationary contract when the coil is cut off from power and the stationery contract when the coil is connected to power.

Electromagnetic Relay Introduction
This 8-pin relay features DPDT wiring which you can see clearly through the transparent outer shell. Coil voltage is optional among 12/24/110/220V. Contacts are made from silver alloy for precision operation. It's widely used in auto-control system.

Functions & Operation of HH52PL Electromagnetic Relay
The working principle of electromagnetic relay is to use electromagnetic force to drive the opening and closing of contacts. When energized, the coil produces a magnetic field whose strength increases as the current increases. This magnetic field attracts the iron core, causing it to move, thus pushing the contacts to close. When the power is cut off, the magnetic field disappears and the iron core returns to its original position under the action of the spring force, causing the contacts to open. By controlling the on and off of the current, the contacts can be controlled, thereby controlling the circuit. We used 4 light bulbs (220V), a power supply, a push button switch and relay to show you how it works in a more intuitive way.

How to Use AC Contactor with a  Relay at Safe Voltage?

Contactors are widely used in industrial equipment. It is a common application to control 110V/120V/220V/240V AC contactors with 12V/24V/36V DC relays. Users can use this method to control unsafe voltages. This video will show you how to use AC contactor with a relay at safe voltage.

Relay Holding Circuit and PLC Holding Program

Automatic holding circuit is commonly used in various electrical cabinets and is a simple logic circuit. Of course, this simple logic circuit can be built into a large number of PLCs, and it is the basis of PLC logic instructions.

In this video we will try to clear the confusion many people have between relays and contactors by showing you how to tell the difference based on five criteria: Definition, Capacity, Structure, Contacts and Applications.

Product reviews
When the relay and its lights are on for a while, will unit get too warm?
5
Albert
Avatar
4/12/2022 3:38 AM
I'm a little worried about when the relay and its lights are on for a while, is the unit suppose to get fairly warm? Cause the one I bought from elsewhere gets too warm.
Was this review helpful? Yes No (0/0)
Compact and easy to wire
5
Farrah
Avatar
10/27/2022 12:04 AM
This is a DPDT electromagnetic relay with a 12V coil. The din mount makes it easy to install with others. The ease of having the relay socket labeled. I will definitely be buying these again as I make several control panels.
Was this review helpful? Yes No (0/0)
High quality electromagnetic relay
5
Daye
Avatar
12/9/2022 12:21 AM
Equal in quality to any relays I've used in industry applications. Handy LED indicator. Electromagnetic relay plugs in and out of the socket smoothly and firmly.
Was this review helpful? Yes No (0/0)
Solid electromagnetic relay
5
Jakko
Avatar
3/8/2023 2:08 AM
I bought 2 electromagnetic relays. They do make a buzzing noise when active. I used them to control the master valve in my in ground irrigation system. They work just fine.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

8-pin DPDT electromagnetic relay is in small size, easy to drive and has a wide range of applications like electronic equipment, household appliances, office automation etc.

Specification

BasicsModelATO-HH52P/MY2NJ (Relay with Socket)
Dimension (L*W*H)27×21×35mm
Weight30g
Ambient Temperature-25℃~+55℃
Terminal TypePlug-in
Number of Pins8
Technical ParametersContact FormDPDT (2 Form C)
Contact MaterialSilver alloy
Contact Capacity (Resistive load)5A/28V DC, 5A/240V AC
Coil PowerDC≤0.9W, AC≤1.2VA
Coil Voltage (Optional)12V DC, 24VDC, 110V AC, 220V AC
Pick-up Voltage at 23℃DC≤75%, AC≤80%
Drop-out Voltage at 23℃DC≥10%, AC≥30%
Contact Resistance @6V DC 1A≤100MΩ
Dielectric StrengthBetween open contact≥1000V AC 50Hz/1min
Between adjacent contact≥1000V AC 50Hz/1min
Between coil & contact≥1500VAC 50Hz/1min
Leakage current≤1mA
Insulation Resistance (MΩ)≥500MΩ at 500V DC
Service lifeElectrical105 Times (Frequency: On 1 Time/1s, Off 1 Time/1s)
Mechanical106 Times (Frequency: 300 Time/1min)

Note: Here just shows the contact form DPDT, and another contact forms 2NO (2 Form A) and 2NC (2 Form B) are still available. What's more, please kindly note that What's more, please kindly noted that other coil voltages are also available (DC: 6-220V; AC: 6-380V). If you have any requirments, please don't hesitate to contact us.

Dimensions & Connection Diagram
HH52PL electromangetic relay dimensions wiringDetails

Electromagnetic Relay,DPDT Details

Tips: Working principle of electromagnetic relay

Electromagnetic replay uses electromagnet to control “on” or “off” status of operating circuit. Thus how an electromagnetic relay works specifically?

Electromagnetic relay consists of electromagnet, armature, spring, movable contact and stationary contact. When applying voltage to both ends of a coil, the coil will be flowed with current and generate electromagnetic effect. The electromagnet will attract armature to the iron core against tension of spring, so as to pull the movable contact of the armature to the stationary contact (normally open contact, or NO). When users cut off power, attraction of the electromagnet will disappear and the armature will restore its position under tension of the spring to release the movable contract from the stationary contact (normally closed contract or NC). The pulling and releasing are used to control opening and closing of the circuit. Normally open and closed contacts respectively refer to the stationary contract when the coil is cut off from power and the stationery contract when the coil is connected to power.

Product reviews
When the relay and its lights are on for a while, will unit get too warm?
5
Albert
Avatar
4/12/2022 3:38 AM
I'm a little worried about when the relay and its lights are on for a while, is the unit suppose to get fairly warm? Cause the one I bought from elsewhere gets too warm.
Was this review helpful? Yes No (0/0)
Compact and easy to wire
5
Farrah
Avatar
10/27/2022 12:04 AM
This is a DPDT electromagnetic relay with a 12V coil. The din mount makes it easy to install with others. The ease of having the relay socket labeled. I will definitely be buying these again as I make several control panels.
Was this review helpful? Yes No (0/0)
High quality electromagnetic relay
5
Daye
Avatar
12/9/2022 12:21 AM
Equal in quality to any relays I've used in industry applications. Handy LED indicator. Electromagnetic relay plugs in and out of the socket smoothly and firmly.
Was this review helpful? Yes No (0/0)
Solid electromagnetic relay
5
Jakko
Avatar
3/8/2023 2:08 AM
I bought 2 electromagnetic relays. They do make a buzzing noise when active. I used them to control the master valve in my in ground irrigation system. They work just fine.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

9 Amps 3 Pole AC Contactor 24V/110V/220V Coil

ATO-ACCON-009
$48.90
9 amps 3 pole AC contactor, available with 24V, 110V, 220V coil voltage. It mainly applies to the circuit of AC 50Hz/60Hz, and rated insulation voltage 660V. The rated current is 9A when used at 380V and 7A at 660V, for long distance breaking circuit and frequently starting or control the motor. This bypass contactor frequently start and control AC electromotor.

Safety Light Curtain Barrier, 10-40mm

ATO-SLC-QC
$319.23
Safety light curtain barrier with 10-40mm resolution, short response time, anti-interference ability, superior shockproof performance, long protection length, strong universality, easy to install and debug, certificates of TUV/ CE/ RoHs. Ideal for point-of-operation guarding on presses, robots, and automated equipment, ensuring compliance with safety standards while maintaining productivity.

12V DC 4.2A 50W Switching Power Supply

ATO-SMPS-50-12
$54.15
Cheap yet quality 12V DC switching power supply with universal AC input, works at 4.2A rated current and 50W rated power with short circuit and overload protection, best SMPS power supply for office devices, household appliance and industrial equipment.

24V DC 8.3A 200W Switching Power Supply

ATO-SMPS-200-24
$67.58
Low price switching power supply transforms the full range of AC input to a stable DC voltage of 24V at the rated power 200W and rated current 8.3A, high efficiency and high reliability SMPS ideal for LED lights, printers, computers, monitoring cameras, industrial control, etc.

1/2" Digital Flow Switch for Air

ATO-FLOW-12
$231.79
Factory price digital air flow switch for sale, 1/2 inch thread port size, with digital display for real time monitoring, ±2% accuracy, measuring air and Nitrogen (N2), fluid temperature 0~50℃. This air flow switch comes with high sensitive sensor, which is designed for flow sensing to transmit data to the mainboard.