48V DC 4.2A 200W Switching Power Supply

$67.58
Affordable price 200W switching power supply converts AC input to 48V DC at a rated current of 4.2A with short circuit, overload and overvoltage protections. SMPS power supply is high efficiency and high reliability, ideal DC power supply for wide applications.
SKU: ATO-SMPS-200-48
Free Shipping
Delivery date: 6-12 days

Features

  • Universal AC input range selectable by a switch
  • Protections: short circuit, overload and overvoltage
  • Cooling by free air convection
  • LED indicator for power on
  • 100% full load burn-in test
  • Low cost and high reliability

Specification

ModelATO-S-200-48
Output
DC Voltage48V
Rated Current4.2A
Current Range0 ~ 4.2A
Rated Power200W
Ripple & Noise (Max.)(Note 2)100mVp-p
Voltage Adjust Range43 ~ 53V
Voltage Tolerance (Note 3)±1.0%
Line Regulation±0.5%
Load Regulation±0.5%
Setup, Rise, Holdup Time100ms, 50ms, 20ms at full load
InputVoltage Range88 ~ 132VAC/176V~264VAC (selected by a switch) or 255 ~ 370VDC
Frequency Range47~63Hz
Efficiency (Typ.)87%
AC Current (Typ.)3.2A/115V AC 1.6A/230V AC
Inrush Current (Typ.)Cold start: 35A
Leakage Current<3.5mA/240V AC
ProtectionOverload105~150% rated output power
Protection type: Shut down output voltage, re-power on to recover.
Overvoltage55.2~64.8V
Protection type: Shut down output voltage, re-power on to recover.
EnvironmentWorking Temperature-10 ~ +60℃
Working Humidity20~90% RH non-condensing
Storage Temperature-20~+85℃
Storage Humidity10~95% RH non-condensing
Temperature Coefficient±0.03%/℃ (0~50℃)
Vibration10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4)Safety StandardsUL1012 Approved
Withstand VoltageI/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH
EMC EmissionCompliance to FCC Part 15 J conduction Class B
EMC ImmunityCompliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, light industry level, criteria A
OthersMTBF≥286.7K hrs MIN. MIL-HDBK-217F (25℃)
Dimension199*110*50mm (L*W*H)
Weight0.8kg
Note1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.
4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives.

Dimensions (Unit: mm)

150W switch-mode power supply dimensionSMPS terminal pin number assignment

Details

48V Switching Power Supply Details

SMPS Power Supply Applications

  • Power Tools
    Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc.
  • Offices Devices
    Computer, Printer, LCD Monitor, Scanning Machine, etc.
  • Electrics & Household Appliance
    TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge/Freezr, Coffemarker, etc.
  • Industrial Equipemnt
    Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.

Tips: How to lower ripple nose of switching power supply (SMPS)?

1. Strengthen the inductor and filtering of output capacitor

According to a formula about the switching power supply, current fluctuation in the inductor forms up an inverse relationship with the inductance. In addition, output ripples constitute inverse relationship with capacitance. Increase of inductance and output capacitance can reduce ripples, but this measure just plays a minor role.

2. Secondary smoothing means adding another LC filter

LC filter performs well in inhibiting noise ripples. To reduce ripples of SMPS power supply, users shall select appropriate inductors and capacitors to form up a filter circuit according to frequency of ripples to be removed.

3. Connect switching power supply output to LDO filter

It serves as an effective way to reduce the SMPS ripples and noises. This method can help users maintain a constant voltage without changing original feedback system, but it brings about highest costs and energy consumption.

4. Connect capacitor C or RC to diode in parallel

Values of capacitor C or RC connected to the diode in parallel can be determined only by repeated experiments. If the values are set in a false way, it may cause serious oscillating.

5. Diode post inductance (EMI filter)

It is a common way to curb high-frequency noise of the switching power supply. Users need to select appropriate inductors according to frequency of noise. This method can effectively inhibit noise, but it shall be noticed that the rated current of inductors must comply with actual demands.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • Universal AC input range selectable by a switch
  • Protections: short circuit, overload and overvoltage
  • Cooling by free air convection
  • LED indicator for power on
  • 100% full load burn-in test
  • Low cost and high reliability

Specification

ModelATO-S-200-48
Output
DC Voltage48V
Rated Current4.2A
Current Range0 ~ 4.2A
Rated Power200W
Ripple & Noise (Max.)(Note 2)100mVp-p
Voltage Adjust Range43 ~ 53V
Voltage Tolerance (Note 3)±1.0%
Line Regulation±0.5%
Load Regulation±0.5%
Setup, Rise, Holdup Time100ms, 50ms, 20ms at full load
InputVoltage Range88 ~ 132VAC/176V~264VAC (selected by a switch) or 255 ~ 370VDC
Frequency Range47~63Hz
Efficiency (Typ.)87%
AC Current (Typ.)3.2A/115V AC 1.6A/230V AC
Inrush Current (Typ.)Cold start: 35A
Leakage Current<3.5mA/240V AC
ProtectionOverload105~150% rated output power
Protection type: Shut down output voltage, re-power on to recover.
Overvoltage55.2~64.8V
Protection type: Shut down output voltage, re-power on to recover.
EnvironmentWorking Temperature-10 ~ +60℃
Working Humidity20~90% RH non-condensing
Storage Temperature-20~+85℃
Storage Humidity10~95% RH non-condensing
Temperature Coefficient±0.03%/℃ (0~50℃)
Vibration10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4)Safety StandardsUL1012 Approved
Withstand VoltageI/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH
EMC EmissionCompliance to FCC Part 15 J conduction Class B
EMC ImmunityCompliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, light industry level, criteria A
OthersMTBF≥286.7K hrs MIN. MIL-HDBK-217F (25℃)
Dimension199*110*50mm (L*W*H)
Weight0.8kg
Note1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.
4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives.

Dimensions (Unit: mm)

150W switch-mode power supply dimensionSMPS terminal pin number assignment

Details

48V Switching Power Supply Details

SMPS Power Supply Applications

  • Power Tools
    Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc.
  • Offices Devices
    Computer, Printer, LCD Monitor, Scanning Machine, etc.
  • Electrics & Household Appliance
    TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge/Freezr, Coffemarker, etc.
  • Industrial Equipemnt
    Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.

Tips: How to lower ripple nose of switching power supply (SMPS)?

1. Strengthen the inductor and filtering of output capacitor

According to a formula about the switching power supply, current fluctuation in the inductor forms up an inverse relationship with the inductance. In addition, output ripples constitute inverse relationship with capacitance. Increase of inductance and output capacitance can reduce ripples, but this measure just plays a minor role.

2. Secondary smoothing means adding another LC filter

LC filter performs well in inhibiting noise ripples. To reduce ripples of SMPS power supply, users shall select appropriate inductors and capacitors to form up a filter circuit according to frequency of ripples to be removed.

3. Connect switching power supply output to LDO filter

It serves as an effective way to reduce the SMPS ripples and noises. This method can help users maintain a constant voltage without changing original feedback system, but it brings about highest costs and energy consumption.

4. Connect capacitor C or RC to diode in parallel

Values of capacitor C or RC connected to the diode in parallel can be determined only by repeated experiments. If the values are set in a false way, it may cause serious oscillating.

5. Diode post inductance (EMI filter)

It is a common way to curb high-frequency noise of the switching power supply. Users need to select appropriate inductors according to frequency of noise. This method can effectively inhibit noise, but it shall be noticed that the rated current of inductors must comply with actual demands.

Only registered users can write reviews
Customers who bought this item also bought

12V DC 4.2A 50W Switching Power Supply

ATO-SMPS-50-12
$54.15
Cheap yet quality 12V DC switching power supply with universal AC input, works at 4.2A rated current and 50W rated power with short circuit and overload protection, best SMPS power supply for office devices, household appliance and industrial equipment.

12V DC 8.5A 100W Switching Power Supply

ATO-SMPS-100-12
$58.15
Switching power supply converts full range AC to DC 12V, rated current 8.5A and rated power 100W, with overvoltage and overload protection. High quality and high efficiency SMPS power supply suitable for light strip, computer, printer, industry control system, and home appliances.

48V DC 2A 100W Switching Power Supply

ATO-SMPS-100-48
$58.15
48V DC switching power supply converts universal AC input to DC output with rated current 2A. High performance and favorable price SMPS has a wide range of application in power tools, office equipment, home appliance and industrial control equipment.