Magnetic Particle Brake, Single Shaft, 3Nm-400Nm

$319.89
Magnetic particle brake, single shaft, rated torque can select 6Nm, 12Nm, 25Nm, 50Nm, 100Nm, 200Nm or 400Nm, maximum rated speed of 1800rpm, with maintain, braking, buffer start, tension control and torque limit. Electric brake has the advantages of quick response, simple structure, no shock vibration and energy saving. Manufacturer direct sales.
SKU: ATO-PB
*
Free Shipping
Delivery date: 6-12 days

Magnetic powder brake rated torque 3Nm, 50Nm, 100Nm, 200Nm, 400Nm are avaliable, overload protection, speed adjustment, can be used in textile industry, printing and dyeing, manufacturer direct sale.

Magnetic Particle Brake Features
1. The excitation current is linear with the torque. The transmitted torque is substantially linear with the excitation current. As long as the magnitude of the stimulation current is changed, the magnitude of the torque can be controlled over a wide range. In general, the stimulus current is substantially proportional to the transmitted torque in the range of 5%-100% of the rated torque.
2. Stable slip torque. When the stimulation current remains unchanged, the transmitted torque is not affected by the difference in rotational speed between the active and the driven, that is, there is no difference between the static friction torque and the dynamic friction torque, so that the torque can be stably achieved. This feature is applied to the tension control, and the user can accurately control the torque by adjusting the stimulation current, thereby effectively controlling the tension of the roll.
3. Prevent heat generation due to slip. Generally, the friction part is inevitably heated or even burned when continuously sliding. However, the ATO magnetic powder brake has a complete heat sink, which will not be too hot for a long time and has a long service life.

Magnetic Particle Brake Specification:

ModelATO-PB-003ATO-PB-006ATO-PB-015ATO-PB-025ATO-PB-050ATO-PB-100ATO-PB-200ATO-PB-400
Rated Torque3Nm6Nm15Nm25Nm50Nm100Nm200Nm400Nm
Rated Current0.53A0.81A0.94A1.24A2.15A2.4A2.7A3.5A
Rated VoltageDC24V
PowerPower12.7W19.4W22.5W30W51.5W57.6W64.8W84W
No. of Hour Set0.08S0.08S0.1S0.12S0.13S0.25S0.37S0.4S
Moment of Interial3.00*10-4 Kgcm26.0*10-4 Kgcm21.34*10-3 Kgcm23.8*10-3 Kgcm29.5*10-3 Kgcm23.5*10-2 Kgcm29.15*10-2 Kgcm22.4*10-1 Kgcm2
Allowable Slip Power Under Forced Air Cooling

Air Pressure/3*104 Pa3*104 Pa5*104 Pa1*105 Pa6*104 Pa5*104 Pa2*105 Pa
Air Volume/0.2m³/min0.2m³/min0.4m³/min0.6m³/min1.1m³/min1.6m³/min2.0m³/min
Slip Power/110W250W380W700W1100W1900W2800W
Weight2.0kg2.1kg4.5kg7.6kg12.5kg34kg45kg90kg
Maximum Speed1800 r/min
Weight of powder7.5g10g20g33g60g140g225g370g

3Nm-400Nm Magnetic Particle Brake Dimension (unit: mm)

Magnetic particle brake size

ModelATO-PB-003ATO-PB-006ATO-PB-015ATO-PB-025ATO-PB-050ATO-PB-100ATO-PB-200ATO-PB-400
D1120125152182219278327395
D275110126160196260301365
D3 (g7)4242425574100110130
D464646478100140150200
L106112.5132157192239270.5338
L12225294355656992
L27880.598108131167191.5226
L31111151730283035
L4141725.52628465670
L5121214.5151821.53240
d (h7) (shaft diameter)1012152025303545
T (-0-0.2) (Contains key)11.513.51722283338.548.5
W (P7)4571012
VM3*0.6P*6LM4*0.7P*8LM6*1P*12LM10*1.5P*20L
R6-M5*0.8P*10L6-M6*1P*10L6-M10*1.5P*20L6-M10*1.5P*15L
S/1/81/43/8

Details

Magnetic Particle Brake,Single Shaft, Details

Single Shaft Magnetic Powder Brake Installation

Magnetic particle brake installation
Magnetic Powder Brake Application
Magnetic powder brake appication

Tips: Magnetic Particle Brake Main Applications
Magnetic powder brake have been widely used in paper making, printing, plastic items, rubber industry, textile industry, printing and dyeing, wire and cable, metallurgy industry and tension control of winding and unwinding in roll material processing industry. Moreover, ATO magnetic powder brake can be also used in buffering start, test loading and braking of the transmission machinery, overload protection, speed adjustment.

This video will show you water-cooled magnetic powder clutch seal ring replacement.

Product reviews
Good running magnetic brakes
5
Jeff
Avatar
11/1/2019 1:49 AM
A few days ago, I bought two 400Nm, one 6Nm magnetic powder brakes at ATO. I found many other sellers, but I didn't have the information I wanted. Later, I found the magnetic powder brake that I am satisfied with. I am very grateful to the torque curve provided by ATO. It is very convenient to install and I am very satisfied.
Was this review helpful? Yes No (0/0)
Do you have any advice for controlling the particle brake current?
5
dylan
Avatar
7/20/2023 8:52 PM
Hello, I am interested in the ATO-PB-006.
I plan on using it as an intermittent braking system where I can vary the braking torque.
Do you have any recommendations for controlling the current?
Also, do you have information on the time it takes for the brake to fully engage and disengage?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, the control current is related to your actual use scenario and your control instrument, so we cannot give suggestions.
We haven't calculated the time of the brake to fully engage and disengage.
Generally, it takes a few seconds for the brake to fully engage and disengage.
Continuous slip power the particle brake can handle
5
yohya
Avatar
7/25/2023 7:59 PM
Could you tell me the continuous slip power the ATO-PB-050 can handle?
The specification table says 700W, but I need to know if it can dissipate all that heat with no additional cooling, on a continuous basis.
Also, could you tell me if you have it in stock?
Was this review helpful? Yes No (0/0)
ATO Responded
1. ATO-PB-050, we have it in stock.
2. ATO-PB-050 is naturally heat-dissipating, and the installation location should be in a well-ventilated and heat-dissipating environment.
As long as the temperature does not exceed 70℃, it can be used normally.
Magnetic particle brake
4
Lorena
Avatar
3/30/2026 12:43 AM
I'm looking for a magnetic particle brake with a keyway opening and a 1 1/4 inch shaft diameter. I also need a controller and a power supply. How about the ATO-PB-100?
Was this review helpful? Yes No (0/0)
ATO Responded
Our magnetic particle brake, single shaft, 100Nm, ATO-PB-100, with a 30mm output shaft diameter and keyway, please confirm if it meets your requirements.
Minimum operating speed
5
Charlene
Avatar
7/24/2026 12:58 AM
Does a magnetic particle brake have a minimum operating speed with controlled torque?
Was this review helpful? Yes No (0/0)
ATO Responded
Magnetic particle brakes do not have a minimum operating speed parameter for torque control. The controller controls the torque of the brake by controlling the current, which is unrelated to speed.
Purchase information and method
5
Chidel
Avatar
8/5/2026 1:31 AM
We currently need to purchase magnetic particle to maintain an older single-shaft 50N·m magnetic particle brake (Model: ATO-PB-050). Please provide the necessary information about the magnetic particle so we can proceed with the procurement.
Was this review helpful? Yes No (0/0)
ATO Responded
If you wish to purchase a magnetic particle brake, single shaft 50N.m (Model: ATO-PB-050), you can refer to the information on our website. If it meets your requirements, you can place an order directly through our website.
Compatible device
5
Yuti
Avatar
8/24/2026 2:23 AM
Hello, we recently purchased the ATO-PB-050 and noticed that its keyway opening is 7mm. A 7mm keyway coupling does not seem to be a standard specification. Does the ATO-PB-050 come with a usable adapter and key?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can also provide couplings. Are you looking to connect the ATO-PB-050 (25mm shaft) to the output shaft of a digital rotary torque sensor via a coupling?
Magnetic powder information
4
Nikolai
Avatar
9/24/2026 12:11 AM
We need some supplementary information about ATO-PB-050 magnetic powder. We want to know the material name of ATO-PB-050 magnetic powder and whether this product is an alloy powder or a mixed/proportioned metal powder.
Was this review helpful? Yes No (0/0)
ATO Responded
The material name of PB-050 magnetic powder is: metal powder. Its main components are iron, cobalt, and nickel. It is a soft magnetic material and is not magnetic itself. It can be considered ordinary industrial iron powder and does not contain rare metal components.
Heat dissipation issues
5
Wolinas
Avatar
10/21/2026 3:11 AM
We want to test 100Nm torque and 175rpm speed. Is the power of the ATO-PB-200 sufficient? We need to run it for 5 to 10 minutes to verify the transmission performance. I'm considering the heat dissipation issue. Do we need to connect an air intake for air cooling?
Was this review helpful? Yes No (0/0)
ATO Responded
The PB-200 model is suitable. 175rpm is a low speed; heat dissipation is not a problem and will not affect the brake's performance efficiency. Air cooling is generally used, rarely air-cooled.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Magnetic powder brake rated torque 3Nm, 50Nm, 100Nm, 200Nm, 400Nm are avaliable, overload protection, speed adjustment, can be used in textile industry, printing and dyeing, manufacturer direct sale.

Magnetic Particle Brake Features
1. The excitation current is linear with the torque. The transmitted torque is substantially linear with the excitation current. As long as the magnitude of the stimulation current is changed, the magnitude of the torque can be controlled over a wide range. In general, the stimulus current is substantially proportional to the transmitted torque in the range of 5%-100% of the rated torque.
2. Stable slip torque. When the stimulation current remains unchanged, the transmitted torque is not affected by the difference in rotational speed between the active and the driven, that is, there is no difference between the static friction torque and the dynamic friction torque, so that the torque can be stably achieved. This feature is applied to the tension control, and the user can accurately control the torque by adjusting the stimulation current, thereby effectively controlling the tension of the roll.
3. Prevent heat generation due to slip. Generally, the friction part is inevitably heated or even burned when continuously sliding. However, the ATO magnetic powder brake has a complete heat sink, which will not be too hot for a long time and has a long service life.

Magnetic Particle Brake Specification:

ModelATO-PB-003ATO-PB-006ATO-PB-015ATO-PB-025ATO-PB-050ATO-PB-100ATO-PB-200ATO-PB-400
Rated Torque3Nm6Nm15Nm25Nm50Nm100Nm200Nm400Nm
Rated Current0.53A0.81A0.94A1.24A2.15A2.4A2.7A3.5A
Rated VoltageDC24V
PowerPower12.7W19.4W22.5W30W51.5W57.6W64.8W84W
No. of Hour Set0.08S0.08S0.1S0.12S0.13S0.25S0.37S0.4S
Moment of Interial3.00*10-4 Kgcm26.0*10-4 Kgcm21.34*10-3 Kgcm23.8*10-3 Kgcm29.5*10-3 Kgcm23.5*10-2 Kgcm29.15*10-2 Kgcm22.4*10-1 Kgcm2
Allowable Slip Power Under Forced Air Cooling

Air Pressure/3*104 Pa3*104 Pa5*104 Pa1*105 Pa6*104 Pa5*104 Pa2*105 Pa
Air Volume/0.2m³/min0.2m³/min0.4m³/min0.6m³/min1.1m³/min1.6m³/min2.0m³/min
Slip Power/110W250W380W700W1100W1900W2800W
Weight2.0kg2.1kg4.5kg7.6kg12.5kg34kg45kg90kg
Maximum Speed1800 r/min
Weight of powder7.5g10g20g33g60g140g225g370g

3Nm-400Nm Magnetic Particle Brake Dimension (unit: mm)

Magnetic particle brake size

ModelATO-PB-003ATO-PB-006ATO-PB-015ATO-PB-025ATO-PB-050ATO-PB-100ATO-PB-200ATO-PB-400
D1120125152182219278327395
D275110126160196260301365
D3 (g7)4242425574100110130
D464646478100140150200
L106112.5132157192239270.5338
L12225294355656992
L27880.598108131167191.5226
L31111151730283035
L4141725.52628465670
L5121214.5151821.53240
d (h7) (shaft diameter)1012152025303545
T (-0-0.2) (Contains key)11.513.51722283338.548.5
W (P7)4571012
VM3*0.6P*6LM4*0.7P*8LM6*1P*12LM10*1.5P*20L
R6-M5*0.8P*10L6-M6*1P*10L6-M10*1.5P*20L6-M10*1.5P*15L
S/1/81/43/8

Details

Magnetic Particle Brake,Single Shaft, Details

Single Shaft Magnetic Powder Brake Installation

Magnetic particle brake installation
Magnetic Powder Brake Application
Magnetic powder brake appication

Tips: Magnetic Particle Brake Main Applications
Magnetic powder brake have been widely used in paper making, printing, plastic items, rubber industry, textile industry, printing and dyeing, wire and cable, metallurgy industry and tension control of winding and unwinding in roll material processing industry. Moreover, ATO magnetic powder brake can be also used in buffering start, test loading and braking of the transmission machinery, overload protection, speed adjustment.

Product reviews
Good running magnetic brakes
5
Jeff
Avatar
11/1/2019 1:49 AM
A few days ago, I bought two 400Nm, one 6Nm magnetic powder brakes at ATO. I found many other sellers, but I didn't have the information I wanted. Later, I found the magnetic powder brake that I am satisfied with. I am very grateful to the torque curve provided by ATO. It is very convenient to install and I am very satisfied.
Was this review helpful? Yes No (0/0)
Do you have any advice for controlling the particle brake current?
5
dylan
Avatar
7/20/2023 8:52 PM
Hello, I am interested in the ATO-PB-006.
I plan on using it as an intermittent braking system where I can vary the braking torque.
Do you have any recommendations for controlling the current?
Also, do you have information on the time it takes for the brake to fully engage and disengage?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, the control current is related to your actual use scenario and your control instrument, so we cannot give suggestions.
We haven't calculated the time of the brake to fully engage and disengage.
Generally, it takes a few seconds for the brake to fully engage and disengage.
Continuous slip power the particle brake can handle
5
yohya
Avatar
7/25/2023 7:59 PM
Could you tell me the continuous slip power the ATO-PB-050 can handle?
The specification table says 700W, but I need to know if it can dissipate all that heat with no additional cooling, on a continuous basis.
Also, could you tell me if you have it in stock?
Was this review helpful? Yes No (0/0)
ATO Responded
1. ATO-PB-050, we have it in stock.
2. ATO-PB-050 is naturally heat-dissipating, and the installation location should be in a well-ventilated and heat-dissipating environment.
As long as the temperature does not exceed 70℃, it can be used normally.
Magnetic particle brake
4
Lorena
Avatar
3/30/2026 12:43 AM
I'm looking for a magnetic particle brake with a keyway opening and a 1 1/4 inch shaft diameter. I also need a controller and a power supply. How about the ATO-PB-100?
Was this review helpful? Yes No (0/0)
ATO Responded
Our magnetic particle brake, single shaft, 100Nm, ATO-PB-100, with a 30mm output shaft diameter and keyway, please confirm if it meets your requirements.
Minimum operating speed
5
Charlene
Avatar
7/24/2026 12:58 AM
Does a magnetic particle brake have a minimum operating speed with controlled torque?
Was this review helpful? Yes No (0/0)
ATO Responded
Magnetic particle brakes do not have a minimum operating speed parameter for torque control. The controller controls the torque of the brake by controlling the current, which is unrelated to speed.
Purchase information and method
5
Chidel
Avatar
8/5/2026 1:31 AM
We currently need to purchase magnetic particle to maintain an older single-shaft 50N·m magnetic particle brake (Model: ATO-PB-050). Please provide the necessary information about the magnetic particle so we can proceed with the procurement.
Was this review helpful? Yes No (0/0)
ATO Responded
If you wish to purchase a magnetic particle brake, single shaft 50N.m (Model: ATO-PB-050), you can refer to the information on our website. If it meets your requirements, you can place an order directly through our website.
Compatible device
5
Yuti
Avatar
8/24/2026 2:23 AM
Hello, we recently purchased the ATO-PB-050 and noticed that its keyway opening is 7mm. A 7mm keyway coupling does not seem to be a standard specification. Does the ATO-PB-050 come with a usable adapter and key?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can also provide couplings. Are you looking to connect the ATO-PB-050 (25mm shaft) to the output shaft of a digital rotary torque sensor via a coupling?
Magnetic powder information
4
Nikolai
Avatar
9/24/2026 12:11 AM
We need some supplementary information about ATO-PB-050 magnetic powder. We want to know the material name of ATO-PB-050 magnetic powder and whether this product is an alloy powder or a mixed/proportioned metal powder.
Was this review helpful? Yes No (0/0)
ATO Responded
The material name of PB-050 magnetic powder is: metal powder. Its main components are iron, cobalt, and nickel. It is a soft magnetic material and is not magnetic itself. It can be considered ordinary industrial iron powder and does not contain rare metal components.
Heat dissipation issues
5
Wolinas
Avatar
10/21/2026 3:11 AM
We want to test 100Nm torque and 175rpm speed. Is the power of the ATO-PB-200 sufficient? We need to run it for 5 to 10 minutes to verify the transmission performance. I'm considering the heat dissipation issue. Do we need to connect an air intake for air cooling?
Was this review helpful? Yes No (0/0)
ATO Responded
The PB-200 model is suitable. 175rpm is a low speed; heat dissipation is not a problem and will not affect the brake's performance efficiency. Air cooling is generally used, rarely air-cooled.
Only registered users can write reviews
Customers who bought this item also bought

Digital Rotary Torque Sensor, 0.1/5/300/1000 Nm to 10000 Nm

ATO-TQS-D03
$939.15
Digital rotary torque sensor with LCD display has the capacity range from 0.1 Nm/0.3 Nm/1 Nm/5 Nm/10 Nm/300 Nm/1000 Nm to 10000 Nm. LCD display can show torque, speed and power value at the same time. Dynamic torque sensor adopts two NSK shafts to ensure starting torque as low as 0.00001 Nm. Rotary torque transducer with 7 pin waterproof circular connector and 3m cable can measure both forward and reverse torque, and then output ±5V/0-10V/4-20mA/RS485 torque signal to PLC.

Manual Tension Controller for Magnetic Powder Clutch/Brake

ATO-TC-001
$101.98
Compact manual tension controller with an output voltage of 24V DC, providing current for excitation powder clutch/brake, hysteresis clutch/brake, etc. Manual tension controller is suitable for slitting machines, printing machines, and other equipment requiring channel tension control or cable processing.

Digital Manual Tension Controller For Magnetic Particle Clutch/Brake

ATO-TC-002
$234.98
Low price digital display tension controller with highly adaptable switching power supply, beautiful, intuitive display, external signal control 0~10VDC, input power AC85V~264V, frequency 50/60Hz, is ideal for magnetic powder clutch/brake.

Curved Jaw Coupling, 120 x 160mm

ATO-SC-GFCG-120160
$789.37
Curved Jaw Coupling featuring an outer diameter of 120mm and a length of 160mm, rated torque of 1040 Nm and a maximum allowable speed of 5200 RPM. ATO curved jaw coupling is highly versatile and compatible with a wide range of shaft sizes and types.

24V DC 8.3A 200W Switching Power Supply

ATO-SMPS-200-24
$67.58
Low price switching power supply transforms the full range of AC input to a stable DC voltage of 24V at the rated power 200W and rated current 8.3A, high efficiency and high reliability SMPS ideal for LED lights, printers, computers, monitoring cameras, industrial control, etc.