24V DC 10A 240W Switching Power Supply

$70.08
240W switching power can convert AC power to DC 12V (20A rated current) or 24V (10A rated current). Favorable price and high quality SMPS has short circuit, overload and overvoltage protection to make it ideal for wide use in power tools, household appliance, office devices and industrial control.
SKU: ATO-SMPS-250-24
*
Free Shipping
Delivery date: 6-12 days

Features

  • Universal AC input range selectable by a switch
  • Protections: short circuit, overload and overvoltage
  • Forced air cooling by built-in DC fan
  • LED indicator for power on
  • 100% full load burn-in test
  • Low cost and high reliability

Specification

ModelATO-S-250-12ATO-S-250-24
OutputDC Voltage12V24V
Rated Current20A10A
Current Range0 ~ 20A0 ~ 10A
Rated Power240W240W
Ripple & Noise (Max.)(Note 2)150mVp-p150mVp-p
Voltage Adjust Range10 ~ 13.2V20 ~ 26.4V
Voltage Tolerance (Note 3)±1.0%±1.0%
Line Regulation±0.5%±0.5%
Load Regulation±0.5%±0.5%
Setup, Rise, Holdup Time200ms, 100ms, 20ms at full load
InputVoltage Range90 ~ 132VAC/180V~264VAC (selected by a switch) or 254 ~ 370VDC
Frequency Range47~63Hz
Efficiency (Typ.)80%83%
AC Current (Typ.)4.9A/115V AC 2.8A/230V AC
Inrush Current (Typ.)Cold start: 50A/230V AC
Leakage Current<3.5mA/240V AC
ProtectionOverload105~135% rated output power
Protection type: Constant current limiting, recovers automatically after fault condition is removed.
Overvoltage13.8 ~ 16.2V27.6 ~ 32.4V
Protection type: Hiccup mode, recovers automatically after fault condition is removed.
EnvironmentWorking Temperature-10 ~ +50℃
Working Humidity20~90% RH non-condensing
Storage Temperature-20~+85℃
Storage Humidity10~95% RH non-condensing
Temperature Coefficient±0.03%/℃ (0~50℃)
Vibration10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMCSafety StandardsUL60950-1 Approved
Withstand VoltageI/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH
OthersMTBF≥271.9K hrs MIN. MIL-HDBK-217F (25℃)
Dimension215*115*50mm (L*W*H)
Weight0.95kg
Note1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.

Dimensions (Unit: mm)

240W switched-mode power supply dimension

Details

24V DC Switching Power Supply Details

SMPS Power Supply Applications

  • Power Tools
    Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc.
  • Offices Devices
    Computer, Printer, LCD Monitor, Scanning Machine, etc.
  • Electrics & Household Appliance
    TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge/Freezr, Coffemarker, etc.
  • Industrial Equipemnt
    Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.

Tips: Switching power supply vs. linear power supply

Switching power supply (SMPS) depends on breakover of MOS transistors between upper and lower bridges. Current flows in through MOS transistors of upper bridge and then gather electric power at the coil by its storage function. At last, the power supply closes MOS transistors of the upper bridge and opens those of the lower bridge. The coil and capacitor would supply power to external part. Then, switching power supply would close MOS transistors of the lower bridge and reopen the upper bridge to let the power in. The foresaid process would be repeated. MOS transistors need to be opened alternatively, so it is called switching power supply.

Linear power supply is different from switching power supply. It is equipped with no switches, so the upper hose keeps draining off. MOS transistors of some linear power supplies emit lots of heat. Excessive electric power is converted to heat. It can be found conversion efficiency of linear power supply remains very low. When components are stuck in high temperature, their life span will be reduced and their actual effect will be influenced.

Product reviews
Great 24vdc SMPS
5
Sam
Avatar
6/29/2018 1:51 AM
This 24V power supply is good. The power is stable and it works great in my project so far.
Was this review helpful? Yes No (0/0)
Fan for cooling in this unit
5
Bill H.
Avatar
10/16/2018 3:08 AM
Does this SMPS has fan in it for cooling?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, it has built-in fan for cooling.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • Universal AC input range selectable by a switch
  • Protections: short circuit, overload and overvoltage
  • Forced air cooling by built-in DC fan
  • LED indicator for power on
  • 100% full load burn-in test
  • Low cost and high reliability

Specification

ModelATO-S-250-12ATO-S-250-24
OutputDC Voltage12V24V
Rated Current20A10A
Current Range0 ~ 20A0 ~ 10A
Rated Power240W240W
Ripple & Noise (Max.)(Note 2)150mVp-p150mVp-p
Voltage Adjust Range10 ~ 13.2V20 ~ 26.4V
Voltage Tolerance (Note 3)±1.0%±1.0%
Line Regulation±0.5%±0.5%
Load Regulation±0.5%±0.5%
Setup, Rise, Holdup Time200ms, 100ms, 20ms at full load
InputVoltage Range90 ~ 132VAC/180V~264VAC (selected by a switch) or 254 ~ 370VDC
Frequency Range47~63Hz
Efficiency (Typ.)80%83%
AC Current (Typ.)4.9A/115V AC 2.8A/230V AC
Inrush Current (Typ.)Cold start: 50A/230V AC
Leakage Current<3.5mA/240V AC
ProtectionOverload105~135% rated output power
Protection type: Constant current limiting, recovers automatically after fault condition is removed.
Overvoltage13.8 ~ 16.2V27.6 ~ 32.4V
Protection type: Hiccup mode, recovers automatically after fault condition is removed.
EnvironmentWorking Temperature-10 ~ +50℃
Working Humidity20~90% RH non-condensing
Storage Temperature-20~+85℃
Storage Humidity10~95% RH non-condensing
Temperature Coefficient±0.03%/℃ (0~50℃)
Vibration10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMCSafety StandardsUL60950-1 Approved
Withstand VoltageI/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH
OthersMTBF≥271.9K hrs MIN. MIL-HDBK-217F (25℃)
Dimension215*115*50mm (L*W*H)
Weight0.95kg
Note1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.

Dimensions (Unit: mm)

240W switched-mode power supply dimension

Details

24V DC Switching Power Supply Details

SMPS Power Supply Applications

  • Power Tools
    Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc.
  • Offices Devices
    Computer, Printer, LCD Monitor, Scanning Machine, etc.
  • Electrics & Household Appliance
    TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge/Freezr, Coffemarker, etc.
  • Industrial Equipemnt
    Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.

Tips: Switching power supply vs. linear power supply

Switching power supply (SMPS) depends on breakover of MOS transistors between upper and lower bridges. Current flows in through MOS transistors of upper bridge and then gather electric power at the coil by its storage function. At last, the power supply closes MOS transistors of the upper bridge and opens those of the lower bridge. The coil and capacitor would supply power to external part. Then, switching power supply would close MOS transistors of the lower bridge and reopen the upper bridge to let the power in. The foresaid process would be repeated. MOS transistors need to be opened alternatively, so it is called switching power supply.

Linear power supply is different from switching power supply. It is equipped with no switches, so the upper hose keeps draining off. MOS transistors of some linear power supplies emit lots of heat. Excessive electric power is converted to heat. It can be found conversion efficiency of linear power supply remains very low. When components are stuck in high temperature, their life span will be reduced and their actual effect will be influenced.

Product reviews
Great 24vdc SMPS
5
Sam
Avatar
6/29/2018 1:51 AM
This 24V power supply is good. The power is stable and it works great in my project so far.
Was this review helpful? Yes No (0/0)
Fan for cooling in this unit
5
Bill H.
Avatar
10/16/2018 3:08 AM
Does this SMPS has fan in it for cooling?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, it has built-in fan for cooling.
Only registered users can write reviews
Customers who bought this item also bought

High Temperature Pressure Sensor for Steam/Fuel Oil

ATO-PRES-P300G
$153.97
High-temperature pressure sensor covers -0.1 to 100 MPa and supports 4–20mA, 0–20mA, voltage and RS485 outputs. Designed for steam, fuel oil and other high-temperature liquids, it supports medium temperatures up to 300°C and uses cooling fins for thermal isolation.

Magnetic Powder Brake, Hollow Shaft, 6Nm-200Nm

ATO-POB
$403.89
High performance magnetic powder brake can select rated torque 6Nm, 15Nm, 25Nm, 50Nm, 100Nm, and 200Nm, hollow shaft, stainless steel material, 24VDC voltage, 12 months warranty. It has the functions of maintenance, brake buffer starting, tension control and torque limitation.

Digital Manual Tension Controller For Magnetic Particle Clutch/Brake

ATO-TC-002
$234.98
Low price digital display tension controller with highly adaptable switching power supply, beautiful, intuitive display, external signal control 0~10VDC, input power AC85V~264V, frequency 50/60Hz, is ideal for magnetic powder clutch/brake.