24V DC 2.1A 50W Switching Power Supply

$54.15
24V DC 2.1A 50W switching power supply has universal AC input, with short circuit, overload and overvoltage protections, cooling by free air convection. Low price and high quality SMPS power supply suitable for light strips, computers, printers, monitoring system, etc.
SKU: ATO-SMPS-50-24
Free Shipping
Delivery date: 6-12 days

Features

  • Universal AC input / Full range AC input
  • Short circuit, overload and overvoltage protections
  • Cooling by free air convection
  • LED indicator for power on
  • 100% full load burn-in test
  • High reliability, low price and wide range of applications

Specification

ModelATO-S-50-24
Output
DC Voltage24V
Rated Current2.1A
Current Range0 ~ 2.1A
Rated Power50.4W
Ripple & Noise (Max.)(Note 2)100mVp-p
Voltage Adjust Range22.6 ~ 26.4V
Voltage Tolerance (Note 3)±1.0%
Line Regulation±0.5%
Load Regulation±0.5%
Setup, Rise, Holdup Time200ms, 100ms, 30ms
InputVoltage Range85 ~ 132VAC/170V~260VAC (selected by a switch) or 240 ~ 370V DC
Frequency Range47~63Hz
Efficiency (Typ.)82%
AC Current (Typ.)1.3A/115V AC 0.65A/230V AC
Inrush Current (Typ.)Cold start: 18A/115V AC 36A/230V AC
Leakage Current<1mA/240V AC
ProtectionOverload105~150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed.
EnvironmentWorking Temperature-10 ~ +60℃
Working Humidity20~90% RH non-condensing
Storage Temperature-20~+85℃
Storage Humidity10~95% RH non-condensing
Temperature Coefficient±0.03%/℃ (0~50℃)
Vibration10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4)Safety StandardsUL1012 Approved
Withstand VoltageI/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH
EMC EmissionCompliance to FCC Part 15 Jconduction Class B
OthersMTBF≥408.3K hrs MIN. MIL-HDBK-217F (25℃)
Dimension159*97*38mm (L*W*H)
Weight0.51kg
Note1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.
4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives.

Dimension (Unit: mm)

50W Switch-mode Power Supply DimensionSMPS Terminal Pin Number Definitions

Details

24V DC Switching Power Supply Details

SMPS Power Supply Applications

  • Power Tools
    Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc.
  • Offices Devices
    Computer, Printer, LCD Monitor, Scanning Machine, etc.
  • Electrics & Household Appliance
    TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge/Freezr, Coffemarker, etc.
  • Industrial Equipemnt
    Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.

Tips: Switching power supply development

The development of switching power supply is high-frequency, high reliability, low consumption, low noise, anti-interference and modularity. The performance of switching power supply in light weight, small size and thickness depends on its high frequency. Upgrading of secondary rectification devices and innovation of power ferrites have improved its magnetic performance in high frequency and field density conditions. In addition, miniaturization of capacitors also serves as a key technology. Extensive use of SMT technology accelerated development of switching power supply. To ensure outstanding performance of witching power supply in weight, size and thickness, electric components are laid out on both sides of the circuit. High frequency of switching power supply requires innovation of PWM. As a result, ZVS and ZCS have been applied to switching power supply as supporting technologies to improve its efficiency.

Product reviews
Cool little switching power supply
5
Turner
Avatar
11/22/2018 11:53 PM
After power test, the voltage is stable, I am running a 3D printer from it and it has no problems. The supply gets warm but not too hot. It uses passive cooling (no fan). Good terminal strip with cover, came with a minor bent corner but otherwise ok.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • Universal AC input / Full range AC input
  • Short circuit, overload and overvoltage protections
  • Cooling by free air convection
  • LED indicator for power on
  • 100% full load burn-in test
  • High reliability, low price and wide range of applications

Specification

ModelATO-S-50-24
Output
DC Voltage24V
Rated Current2.1A
Current Range0 ~ 2.1A
Rated Power50.4W
Ripple & Noise (Max.)(Note 2)100mVp-p
Voltage Adjust Range22.6 ~ 26.4V
Voltage Tolerance (Note 3)±1.0%
Line Regulation±0.5%
Load Regulation±0.5%
Setup, Rise, Holdup Time200ms, 100ms, 30ms
InputVoltage Range85 ~ 132VAC/170V~260VAC (selected by a switch) or 240 ~ 370V DC
Frequency Range47~63Hz
Efficiency (Typ.)82%
AC Current (Typ.)1.3A/115V AC 0.65A/230V AC
Inrush Current (Typ.)Cold start: 18A/115V AC 36A/230V AC
Leakage Current<1mA/240V AC
ProtectionOverload105~150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed.
EnvironmentWorking Temperature-10 ~ +60℃
Working Humidity20~90% RH non-condensing
Storage Temperature-20~+85℃
Storage Humidity10~95% RH non-condensing
Temperature Coefficient±0.03%/℃ (0~50℃)
Vibration10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4)Safety StandardsUL1012 Approved
Withstand VoltageI/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH
EMC EmissionCompliance to FCC Part 15 Jconduction Class B
OthersMTBF≥408.3K hrs MIN. MIL-HDBK-217F (25℃)
Dimension159*97*38mm (L*W*H)
Weight0.51kg
Note1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.
4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives.

Dimension (Unit: mm)

50W Switch-mode Power Supply DimensionSMPS Terminal Pin Number Definitions

Details

24V DC Switching Power Supply Details

SMPS Power Supply Applications

  • Power Tools
    Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc.
  • Offices Devices
    Computer, Printer, LCD Monitor, Scanning Machine, etc.
  • Electrics & Household Appliance
    TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge/Freezr, Coffemarker, etc.
  • Industrial Equipemnt
    Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.

Tips: Switching power supply development

The development of switching power supply is high-frequency, high reliability, low consumption, low noise, anti-interference and modularity. The performance of switching power supply in light weight, small size and thickness depends on its high frequency. Upgrading of secondary rectification devices and innovation of power ferrites have improved its magnetic performance in high frequency and field density conditions. In addition, miniaturization of capacitors also serves as a key technology. Extensive use of SMT technology accelerated development of switching power supply. To ensure outstanding performance of witching power supply in weight, size and thickness, electric components are laid out on both sides of the circuit. High frequency of switching power supply requires innovation of PWM. As a result, ZVS and ZCS have been applied to switching power supply as supporting technologies to improve its efficiency.

Product reviews
Cool little switching power supply
5
Turner
Avatar
11/22/2018 11:53 PM
After power test, the voltage is stable, I am running a 3D printer from it and it has no problems. The supply gets warm but not too hot. It uses passive cooling (no fan). Good terminal strip with cover, came with a minor bent corner but otherwise ok.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Tension and Compression Load Cell, 100kg/1 ton/2 ton to 20 ton

ATO-LC-S05
$104.29
Tension and compression load cell can bear both tension and pressure, with good output symmetry, high eccentric load resistant, compact structure and complete specifications. Strain gauge load cell can be applied for batching scale, crane scales and other special weighing instruments.

Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

ATO-LCTR-OA
$81.27
Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.

Digital Load Cell Amplifier, Output 4-20mA/0-10V/RS485

ATO-LCTR-OAR
$109.85
High precision load cell amplifier has a 6 digit LED display, output signal 4-20mA/ 0-5V/ 0-10V/ RS485. There are 3 keys for parameter settings. Digital load cell amplifier can be calibrated on-line by its 3 keys. The setting parameters include zero, capacity, communication rate, division value, decimal digits, etc.

5 Digit Display Controller for Load Cells

ATO-DPM-LC5D
$210.80
Digital panel meter can cooperate with load cells, force sensors and weighing sensors, two outputs for data comparison, digital panel meter can display gross, net, peak and valley value alternately.

5V DC 10A 50W Switching Power Supply

ATO-SMPS-50-5
$54.15
Switching power supply (SMPS) has full range AC input, converting 110V/220V AC to 5V DC with rated current 10A and rated power 50W, cooling by free air convection. High quality and low price switch-mode power supply is an ideal choice for LED light strips, computers, printers, monitoring equipment and industrial control.