Features
- Universal AC input range selectable by a switch
- Protections: short circuit and overload
- Cooling by free air convection
- LED indicator for power on
- 100% full load burn-in test
- Low cost and high reliability
Specification
| Model | ATO-S-100-12 | |
| Output | DC Voltage | 12V |
| Rated Current | 8.5A | |
| Current Range | 0 ~ 8.5A | |
| Rated Power | 102W | |
| Ripple & Noise (Max.)(Note 2) | 100mVp-p | |
| Voltage Adjust Range | 10.8 ~ 13.2V | |
| Voltage Tolerance (Note 3) | ±1.0% | |
| Line Regulation | ±0.3% | |
| Load Regulation | ±0.3% | |
| Setup, Rise, Holdup Time | 200ms, 80ms, 20ms at full load | |
| Input | Voltage Range | 85 ~ 132VAC/180V~264VAC (selected by a switch) or 255 ~ 370VDC |
| Frequency Range | 47~63Hz | |
| Efficiency (Typ.) | 81% | |
| AC Current (Typ.) | 2.4A/115V AC 1.2A/230V AC | |
| Inrush Current (Typ.) | Cold start: 30A/115V AC 60A/230V AC | |
| Leakage Current | <1mA/240V AC | |
| Protection | Overload | 105~150% rated output power Protection type: Shut down output voltage, re-power on to recover. |
| Environment | Working Temperature | -10 ~ +60℃ |
| Working Humidity | 20~90% RH non-condensing | |
| Storage Temperature | -20~+85℃ | |
| Storage Humidity | 10~95% RH non-condensing | |
| Temperature Coefficient | ±0.03%/℃ (0~50℃) | |
| Vibration | 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes | |
| Safety & EMC (Note 4) | Safety Standards | UL1012 Approved |
| Withstand Voltage | I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH | |
| EMC Emission | Compliance to FCC Part15 J conduction Class B | |
| Others | MTBF | ≥322.4K hrs MIN. MIL-HDBK-217F (25℃) |
| Dimension | 199*98*38mm (L*W*H) | |
| Weight | 0.63kg | |
| Note | 1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance includes set up tolerance, line regulation and load regulation. 4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives. | |
Dimension (Unit: mm)


Details

SMPS Power Supply Applications
- Power Tools
Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc. - Offices Devices
Computer, Printer, LCD Monitor, Scanning Machine, etc. - Electrics & Household Appliance
TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge/Freezr, Coffemarker, etc. - Industrial Equipemnt
Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.
Tips: Switching power supply characteristics and applications
SMPS Main characteristics:
- Small size and weight: the size and weight of switching power supply proves to be 20-30% of linear power, because it has no industrial frequency transformer.
- Low energy consumption and high efficiency: power transistor operates in switch state, so it presents lower energy consumption and higher conversion efficiency with a conversion rate of 60-70%. As a contrast, linear power supply only presents a conversion rate of 30-40%.
SMPS Applications:
Switching power supply is widely applied to industrial automatic control, military equipment, R&D equipment, LED lighting equipment, industrial control equipment, communication equipment, power equipment, meters, medical equipment, semi-conductor refrigeration and heating equipment, air purifiers, electronic refrigerators, LCDs, audio-visual products, security and monitoring devices, LED strip lights, computer cases, digital products and various instruments.
Product reviews
Great power supply for LED lights
Steve
5/14/2018 7:30 PM
Great power supply. It works well for powering LED lights. Good job!
Was this review helpful? (0/0)
So far it’s a great power supply.
Dale
11/27/2018 6:39 PM
So far it’s a great power supply. The power supply is a solid, small unit. It seems that powers the radio without any interference. Nice power supply and very satisfied.
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
12V DC 4.2A 50W Switching Power Supply
ATO-SMPS-50-12
$54.15
Cheap yet quality 12V DC switching power supply with universal AC input, works at 4.2A rated current and 50W rated power with short circuit and overload protection, best SMPS power supply for office devices, household appliance and industrial equipment.
48V DC 2A 100W Switching Power Supply
ATO-SMPS-100-48
$58.15
48V DC switching power supply converts universal AC input to DC output with rated current 2A. High performance and favorable price SMPS has a wide range of application in power tools, office equipment, home appliance and industrial control equipment.
48V DC 4.2A 200W Switching Power Supply
ATO-SMPS-200-48
$67.58
Affordable price 200W switching power supply converts AC input to 48V DC at a rated current of 4.2A with short circuit, overload and overvoltage protections. SMPS power supply is high efficiency and high reliability, ideal DC power supply for wide applications.