48V DC 2A 100W Switching Power Supply

$58.15
48V DC switching power supply converts universal AC input to DC output with rated current 2A. High performance and favorable price SMPS has a wide range of application in power tools, office equipment, home appliance and industrial control equipment.
SKU: ATO-SMPS-100-48
Free Shipping
Delivery date: 6-12 days

Features

  • Universal AC input range selectable by a switch
  • Protections: short circuit and overload
  • Cooling by free air convection
  • LED indicator for power on
  • 100% full load burn-in test
  • Low cost and high reliability

24V DC 4.5A 108W SMPS Specification

ModelATO-S-100-48
Output
DC Voltage48V
Rated Current2A
Current Range0 ~ 2A
Rated Power96W
Ripple & Noise (Max.)(Note 2)100mVp-p
Voltage Adjust Range43.2 ~ 52.8V
Voltage Tolerance (Note 3)±1.0%
Line Regulation±0.2%
Load Regulation±0.2%
Setup, Rise, Holdup Time200ms, 80ms, 20ms at full load
InputVoltage Range85 ~ 132VAC/180V~264VAC (selected by a switch) or 255 ~ 370VDC
Frequency Range47~63Hz
Efficiency (Typ.)84%
AC Current (Typ.)2.4A/115V AC 1.2A/230V AC
Inrush Current (Typ.)Cold start: 30A/115V AC 60A/230V AC
Leakage Current<1mA/240V AC
ProtectionOverload105~150% rated output power
Protection type: Shut down output voltage, re-power on to recover.
EnvironmentWorking Temperature-10 ~ +60℃
Working Humidity20~90% RH non-condensing
Storage Temperature-20~+85℃
Storage Humidity10~95% RH non-condensing
Temperature Coefficient±0.03%/℃ (0~50℃)
Vibration10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4)Safety StandardsUL1012 Approved
Withstand VoltageI/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH
EMC EmissionCompliance to FCC Part 15 J conduction Class B
OthersMTBF≥322.4K hrs MIN. MIL-HDBK-217F (25℃)
Dimension199*98*38mm (L*W*H)
Weight0.63kg
Note1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.
4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives.

Dimension (Unit: mm)

100W switch-mode power supply dimensionSMPS terminal pin number assignment

Details

48V DC Switching Power Supply Details

SMPS Power Supply Applications

  • Power Tools
    Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc.
  • Offices Devices
    Computer, Printer, LCD Monitor, Scanning Machine, etc.
  • Electrics & Household Appliance
    TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge/Freezr, Coffemarker, etc.
  • Industrial Equipemnt
    Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.

Tips: How to select switching power supply?

1. Select appropriate specifications of input voltage.

2. Select appropriate power. To extend life span of power supply, it is suggested to select a device with 30% more than rated output power.

3. Consider load characteristics. In case of motors, bulbs or capacitive load, users should select appropriate power supply to prevent overload caused by large current at startup. In case of motors, users should consider backward flow of voltage when the device is halted.

4. Users must consider working temperature of power supply and whether there are additional auxiliary coolers. Output of the power supply shall be reduced in higher temperature conditions.

5. Select following features according to demands:

  • Protective features: overvoltage protection (OVP), over temperature protection (OTP), and over load protection (OLP) etc.
  • Application features: signal functions (indication of normal and failure status), remote control, remote measuring, and parallel connection etc.
  • Special features: power factor correction (PFC), and uninterrupted power supply (UPS)

6. Comply with applicable safety certification and EMC certification.

Product reviews
Stable Power for My Equipment
5
Lyra
Avatar
9/21/2026 1:47 AM
I bought this 48V DC power supply for a small control setup and have been happy with its performance. The 2A output is enough for my application, and the unit has been running steadily without noticeable power issues. It was also reasonably priced compared with similar options.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • Universal AC input range selectable by a switch
  • Protections: short circuit and overload
  • Cooling by free air convection
  • LED indicator for power on
  • 100% full load burn-in test
  • Low cost and high reliability

24V DC 4.5A 108W SMPS Specification

ModelATO-S-100-48
Output
DC Voltage48V
Rated Current2A
Current Range0 ~ 2A
Rated Power96W
Ripple & Noise (Max.)(Note 2)100mVp-p
Voltage Adjust Range43.2 ~ 52.8V
Voltage Tolerance (Note 3)±1.0%
Line Regulation±0.2%
Load Regulation±0.2%
Setup, Rise, Holdup Time200ms, 80ms, 20ms at full load
InputVoltage Range85 ~ 132VAC/180V~264VAC (selected by a switch) or 255 ~ 370VDC
Frequency Range47~63Hz
Efficiency (Typ.)84%
AC Current (Typ.)2.4A/115V AC 1.2A/230V AC
Inrush Current (Typ.)Cold start: 30A/115V AC 60A/230V AC
Leakage Current<1mA/240V AC
ProtectionOverload105~150% rated output power
Protection type: Shut down output voltage, re-power on to recover.
EnvironmentWorking Temperature-10 ~ +60℃
Working Humidity20~90% RH non-condensing
Storage Temperature-20~+85℃
Storage Humidity10~95% RH non-condensing
Temperature Coefficient±0.03%/℃ (0~50℃)
Vibration10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4)Safety StandardsUL1012 Approved
Withstand VoltageI/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH
EMC EmissionCompliance to FCC Part 15 J conduction Class B
OthersMTBF≥322.4K hrs MIN. MIL-HDBK-217F (25℃)
Dimension199*98*38mm (L*W*H)
Weight0.63kg
Note1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.
4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives.

Dimension (Unit: mm)

100W switch-mode power supply dimensionSMPS terminal pin number assignment

Details

48V DC Switching Power Supply Details

SMPS Power Supply Applications

  • Power Tools
    Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc.
  • Offices Devices
    Computer, Printer, LCD Monitor, Scanning Machine, etc.
  • Electrics & Household Appliance
    TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge/Freezr, Coffemarker, etc.
  • Industrial Equipemnt
    Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.

Tips: How to select switching power supply?

1. Select appropriate specifications of input voltage.

2. Select appropriate power. To extend life span of power supply, it is suggested to select a device with 30% more than rated output power.

3. Consider load characteristics. In case of motors, bulbs or capacitive load, users should select appropriate power supply to prevent overload caused by large current at startup. In case of motors, users should consider backward flow of voltage when the device is halted.

4. Users must consider working temperature of power supply and whether there are additional auxiliary coolers. Output of the power supply shall be reduced in higher temperature conditions.

5. Select following features according to demands:

  • Protective features: overvoltage protection (OVP), over temperature protection (OTP), and over load protection (OLP) etc.
  • Application features: signal functions (indication of normal and failure status), remote control, remote measuring, and parallel connection etc.
  • Special features: power factor correction (PFC), and uninterrupted power supply (UPS)

6. Comply with applicable safety certification and EMC certification.

Product reviews
Stable Power for My Equipment
5
Lyra
Avatar
9/21/2026 1:47 AM
I bought this 48V DC power supply for a small control setup and have been happy with its performance. The 2A output is enough for my application, and the unit has been running steadily without noticeable power issues. It was also reasonably priced compared with similar options.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

12V DC 4.2A 50W Switching Power Supply

ATO-SMPS-50-12
$54.15
Cheap yet quality 12V DC switching power supply with universal AC input, works at 4.2A rated current and 50W rated power with short circuit and overload protection, best SMPS power supply for office devices, household appliance and industrial equipment.

12V DC 8.5A 100W Switching Power Supply

ATO-SMPS-100-12
$58.15
Switching power supply converts full range AC to DC 12V, rated current 8.5A and rated power 100W, with overvoltage and overload protection. High quality and high efficiency SMPS power supply suitable for light strip, computer, printer, industry control system, and home appliances.

48V DC 4.2A 200W Switching Power Supply

ATO-SMPS-200-48
$67.58
Affordable price 200W switching power supply converts AC input to 48V DC at a rated current of 4.2A with short circuit, overload and overvoltage protections. SMPS power supply is high efficiency and high reliability, ideal DC power supply for wide applications.