1 hp Non-Enclosure VFD, 1ph Input, 3ph Output

$142.46
Cheap price 1 hp non-enclosure VFD, 208V to 240V single phase input variable frequency drive, single phase 220v to three phase output, compact board VFD with high quality performance, ideal for integrate system solutions.
SKU: GK3300-2S0007
Free Shipping
Delivery date: 6-12 days

Affordable 0.75 kW single phase VFD, non shell design, single phase 220V/230V input, single phase to three phase output, for 1-phase and 3-phase motor speed adjustment.

Specification:

BasicsModelGK3300-2S0007
Capacity1 hp (0.75 kW)
Shipping weight887 g
Dimension (L*W*H)150*98*114 mm
I/O FeatureRated current4.7 A
Input voltage1 phase 220~240V AC
Input frequency50Hz/ 60Hz
Output voltage3 phase AC 0~input voltage
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F control;
Sensorless vector control;
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Tips: Why need to oversize the single phase VFD
The variable frequency drive supplied by ATO.com can operate with single phase input. However, to provide three phase power to the AC motor when only single phase input power is obtained, for this application, the internal components of the 1-phase VFD must be enlarged, otherwise the load must be decreased. Either way, VFDs in 1 phase applications must be oversized to withstand the increased bus voltage ripple and increased input current. If you do not oversize variable frequency drive for the motor in a single phase application, what is waiting for you will be continuous failures.

 

This video includes three parts: 1. What is customized equipment? 2. Difference between non-enclosure and standard VFDs. 3. Pratical operation of ATO non-enclosure VFD. All above explains the features, functions and working of non-enclosure VFD.

In this video, ATO will show you the vfd basic troubleshooting guide.

This video will show you how to measure electrical circuit using digital multimeter.

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
1hp non enclosure VFD protection degree
5
Manny
Avatar
5/10/2021 9:33 PM
What is the protection degree of your VFDs?
Was this review helpful? Yes No (0/0)
ATO Responded
Nema 1 (IP 21).
Very good VFD
5
Crish
Avatar
8/30/2021 12:19 AM
We brought a compressor which works in 230 volt 60 Hz maximum current will take 16 Amps. But in India we had 230 volt 50 Hz. Request your support for the right product to convert 50 Hz to 60 Hz with the same voltage level.
Was this review helpful? Yes No (0/0)
ATO Responded
You can use our 1-phase VFD. But note that the VFD can be used for motor individually not for your whole equipment/machine, with direct connection between VFD output terminals and motor input terminals, nothing in between. Also, the motor will be fully controlled (on/off/speed control) via VFD buttons only.
Based on the situation I described, which VFD would you recommend to me?
5
Nico
Avatar
11/3/2021 8:06 PM
I have an older Rockwell-Delta lathe that has 4 variable pulleys to control speed and does a poor job of that. I would like to install a vfd to control speed and reverse it. The motor is a 1/2 hp, type c, rpm 1725, sf 1.00, V 115/208/230, ph 1, a8.0/4.0, 60 hz, amb 40c, fr 56, code j, ins b* and says it can go into reverse by interchanging the red and black wires. What do you recommend?
Was this review helpful? Yes No (0/0)
ATO Responded
Your motor is 1-phase, so it can not be reversed via 1-phase VFD, and you have to interchange the red and black wires, so you can reverse the direction.
Questions about your 1-phase drive
5
Ortize
Avatar
1/20/2022 12:13 AM
For your GK3000-1S0015 and GK3000-1S0007 1-phase drive, will these take 208v without any issues?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, of course. It can take 208/220/230/240V with no problem.
Are you aware if the VFD has had a "safety" test doen?
5
Drew
Avatar
2/28/2023 11:44 PM
Thanks again for the EMC test report. Are you aware if the VFD has had a "safety" test doen, to the relevant IEC safety standard? And also if the product was test up to 240V, that's what we have in Australia. I've also just now purchased another one.
Was this review helpful? Yes No (0/0)
ATO Responded
Our products have been strictly tested according to factory standards before leaving the factory, and the quality is worthy of guarantee. We have also done withstand voltage tests for countries such as the United States, Canada, Australia and other countries with single-phase voltages up to about 240V. Therefore, there is no problem for our products to meet the requirements of the Australian 240V voltage.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Affordable 0.75 kW single phase VFD, non shell design, single phase 220V/230V input, single phase to three phase output, for 1-phase and 3-phase motor speed adjustment.

Specification:

BasicsModelGK3300-2S0007
Capacity1 hp (0.75 kW)
Shipping weight887 g
Dimension (L*W*H)150*98*114 mm
I/O FeatureRated current4.7 A
Input voltage1 phase 220~240V AC
Input frequency50Hz/ 60Hz
Output voltage3 phase AC 0~input voltage
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F control;
Sensorless vector control;
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Tips: Why need to oversize the single phase VFD
The variable frequency drive supplied by ATO.com can operate with single phase input. However, to provide three phase power to the AC motor when only single phase input power is obtained, for this application, the internal components of the 1-phase VFD must be enlarged, otherwise the load must be decreased. Either way, VFDs in 1 phase applications must be oversized to withstand the increased bus voltage ripple and increased input current. If you do not oversize variable frequency drive for the motor in a single phase application, what is waiting for you will be continuous failures.

 

Product reviews
1hp non enclosure VFD protection degree
5
Manny
Avatar
5/10/2021 9:33 PM
What is the protection degree of your VFDs?
Was this review helpful? Yes No (0/0)
ATO Responded
Nema 1 (IP 21).
Very good VFD
5
Crish
Avatar
8/30/2021 12:19 AM
We brought a compressor which works in 230 volt 60 Hz maximum current will take 16 Amps. But in India we had 230 volt 50 Hz. Request your support for the right product to convert 50 Hz to 60 Hz with the same voltage level.
Was this review helpful? Yes No (0/0)
ATO Responded
You can use our 1-phase VFD. But note that the VFD can be used for motor individually not for your whole equipment/machine, with direct connection between VFD output terminals and motor input terminals, nothing in between. Also, the motor will be fully controlled (on/off/speed control) via VFD buttons only.
Based on the situation I described, which VFD would you recommend to me?
5
Nico
Avatar
11/3/2021 8:06 PM
I have an older Rockwell-Delta lathe that has 4 variable pulleys to control speed and does a poor job of that. I would like to install a vfd to control speed and reverse it. The motor is a 1/2 hp, type c, rpm 1725, sf 1.00, V 115/208/230, ph 1, a8.0/4.0, 60 hz, amb 40c, fr 56, code j, ins b* and says it can go into reverse by interchanging the red and black wires. What do you recommend?
Was this review helpful? Yes No (0/0)
ATO Responded
Your motor is 1-phase, so it can not be reversed via 1-phase VFD, and you have to interchange the red and black wires, so you can reverse the direction.
Questions about your 1-phase drive
5
Ortize
Avatar
1/20/2022 12:13 AM
For your GK3000-1S0015 and GK3000-1S0007 1-phase drive, will these take 208v without any issues?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, of course. It can take 208/220/230/240V with no problem.
Are you aware if the VFD has had a "safety" test doen?
5
Drew
Avatar
2/28/2023 11:44 PM
Thanks again for the EMC test report. Are you aware if the VFD has had a "safety" test doen, to the relevant IEC safety standard? And also if the product was test up to 240V, that's what we have in Australia. I've also just now purchased another one.
Was this review helpful? Yes No (0/0)
ATO Responded
Our products have been strictly tested according to factory standards before leaving the factory, and the quality is worthy of guarantee. We have also done withstand voltage tests for countries such as the United States, Canada, Australia and other countries with single-phase voltages up to about 240V. Therefore, there is no problem for our products to meet the requirements of the Australian 240V voltage.
Only registered users can write reviews