1/2 hp Non-Enclosure VFD, 1ph Input, 3ph Output

$137.68
Factory direct sale 1/2hp 0.4kW VFD, custom-made non enclosure frequency inverter, compact and lightweight, multiple drives can be housed in a cabinet, single phase 220V/230V input, three phase 220v-240v output, with an operation keyboard for easy control.
SKU: GK3300-2S0004
Free Shipping
Delivery date: 6-12 days

Low cost 1/2 hp (400w) non enclosure variable frequency drive, single phase 220V ±15% input, convert single phase to 3 phase, 3 amps, wide range speed adjustment.

Specification:

BasicsModelGK3300-2S0004
Capacity1/2 hp (0.4 kW)
Shipping weight665 g
Dimension (L*W*H)151*104*73 mm
I/O FeatureRated current3 A
Input voltage1 phase 220~240V AC
Input frequency50Hz/ 60Hz
Output voltage3 phase AC 0~input voltage
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F control;
Sensorless vector control;
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Tips: A lot of money can be saved through VFD
Turning off only 10% of the fans and water pumps can save up to 25% of energy costs. In most systems, reducing its speed by 50% will result in a 75% reduction in energy consumption.
VFD helps your business operate more efficiently by using only the energy needed.
VFD extends the service life of equipment by reducing wear. Maintenance costs are also reduced.

This video includes three parts: 1. What is customized equipment? 2. Difference between non-enclosure and standard VFDs. 3. Pratical operation of ATO non-enclosure VFD. All above explains the features, functions and working of non-enclosure VFD.

In this video, ATO will show you the vfd basic troubleshooting guide.

This video will show you how to measure electrical circuit using digital multimeter.

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Full information sent by 1/2hp non enclosure VFD
5
Wallace
Avatar
3/10/2021 8:03 PM
The 1/2hp non enclosure VFD information sent by ATO.com customer service is complete. I have sent you the relevant information about the 1/2hp non enclosure VFD that I want to buy. I will place an order this spring.
Was this review helpful? Yes No (0/0)
According to our needs, you can buy your VFD?
5
Rlbrignac
Avatar
8/24/2021 1:54 AM
We have a 5hp deep well pump. I would like soft start capabilities. Supply is 1 phase 220. If I purchase your single phase to 3 phase unit, can it be used with 3 phase input as just a vfd? If so, do any capabilities change.
Was this review helpful? Yes No (0/0)
ATO Responded
If your motor is rated at 3-phase, 208/220/230V, and its rated current is less than 20A, then you can use our 7.5hp drive, of model: GK3000-2S0055G.
I want to know some information about VFD
5
Angelak
Avatar
9/6/2021 2:10 AM
Hello, I have a drive EM15-SP1S1 input 120V single phase and output 240V 3 phases. I need to know the parameter to adjust the overcurrent protection and the detection time of overcurrent protection. Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
It is a pity that the overcurrent protection of this model is based on the hardware design (more than 2 times the rated current), so it cannot be set on the software. You can use it normally first. If there is any problem, please let us know.
To what terminals can I do that?
5
Farrah
Avatar
3/1/2023 12:01 AM
I need to setup a pump dry float that will turn off the VFD. To what terminals can I do that?
Was this review helpful? Yes No (0/0)
ATO Responded
If your dry float has a normally open dry contact (NO), you can connect this dry contact to the X1 and COM terminals of the VFD. When the dry float has a signal, the normally open contact is closed, connecting the X1 and COM terminals, and the VFD stops. (Please set P4.00=11, define X1 terminal as stop signal)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Low cost 1/2 hp (400w) non enclosure variable frequency drive, single phase 220V ±15% input, convert single phase to 3 phase, 3 amps, wide range speed adjustment.

Specification:

BasicsModelGK3300-2S0004
Capacity1/2 hp (0.4 kW)
Shipping weight665 g
Dimension (L*W*H)151*104*73 mm
I/O FeatureRated current3 A
Input voltage1 phase 220~240V AC
Input frequency50Hz/ 60Hz
Output voltage3 phase AC 0~input voltage
Output frequency0Hz~1000Hz
Over load capacity150% of rated current for 1 minute, 180% of rated current for 3 seconds
Control FeatureControl modeV/F control;
Sensorless vector control;
CommunicationRS485
Speed regulation1:100
Start torque150% of rating torque at 1 Hz
Speed control accuracy≤±0.5% of rating synchronous speed
Frequency precisionDigital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2%
Frequency resolutionAnalog setting: 0.1% of max frequency;
Digital setting: 0.01Hz
Torque boostAutomatic torque boost, manual torque boost 0.1%~30.0%
Interior PID controllerBe convenient to make closed-loop system
Automatic energy save runningOptimize V/F curve automatically based on the load to realize power save running
Automatic voltage regulation (AVR)Can keep constant output voltage when power source voltage varies.
Automatic current limitingLimit running current automatically to avoid frequent over-current which will cause trip
EnvironmentEnclosure ratingIP 20
Temperature–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5%
Humidity5%-95%, without condensation
Altitude≤1000m; VFD will be derated if above 1000m
Impingement and oscillationNormal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g)
Store environment–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight

Note: ATO VFD Cannot be used as a power source, it Can only be directly connected to an induction motor to control the motor speed.

Tips: A lot of money can be saved through VFD
Turning off only 10% of the fans and water pumps can save up to 25% of energy costs. In most systems, reducing its speed by 50% will result in a 75% reduction in energy consumption.
VFD helps your business operate more efficiently by using only the energy needed.
VFD extends the service life of equipment by reducing wear. Maintenance costs are also reduced.

Product reviews
Full information sent by 1/2hp non enclosure VFD
5
Wallace
Avatar
3/10/2021 8:03 PM
The 1/2hp non enclosure VFD information sent by ATO.com customer service is complete. I have sent you the relevant information about the 1/2hp non enclosure VFD that I want to buy. I will place an order this spring.
Was this review helpful? Yes No (0/0)
According to our needs, you can buy your VFD?
5
Rlbrignac
Avatar
8/24/2021 1:54 AM
We have a 5hp deep well pump. I would like soft start capabilities. Supply is 1 phase 220. If I purchase your single phase to 3 phase unit, can it be used with 3 phase input as just a vfd? If so, do any capabilities change.
Was this review helpful? Yes No (0/0)
ATO Responded
If your motor is rated at 3-phase, 208/220/230V, and its rated current is less than 20A, then you can use our 7.5hp drive, of model: GK3000-2S0055G.
I want to know some information about VFD
5
Angelak
Avatar
9/6/2021 2:10 AM
Hello, I have a drive EM15-SP1S1 input 120V single phase and output 240V 3 phases. I need to know the parameter to adjust the overcurrent protection and the detection time of overcurrent protection. Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
It is a pity that the overcurrent protection of this model is based on the hardware design (more than 2 times the rated current), so it cannot be set on the software. You can use it normally first. If there is any problem, please let us know.
To what terminals can I do that?
5
Farrah
Avatar
3/1/2023 12:01 AM
I need to setup a pump dry float that will turn off the VFD. To what terminals can I do that?
Was this review helpful? Yes No (0/0)
ATO Responded
If your dry float has a normally open dry contact (NO), you can connect this dry contact to the X1 and COM terminals of the VFD. When the dry float has a signal, the normally open contact is closed, connecting the X1 and COM terminals, and the VFD stops. (Please set P4.00=11, define X1 terminal as stop signal)
Only registered users can write reviews