1/2" Digital Flow Switch for Air

$231.79
Factory price digital air flow switch for sale, 1/2 inch thread port size, with digital display for real time monitoring, ±2% accuracy, measuring air and Nitrogen (N2), fluid temperature 0~50℃. This air flow switch comes with high sensitive sensor, which is designed for flow sensing to transmit data to the mainboard.
SKU: ATO-FLOW-12
*
Free Shipping
Delivery date: 6-12 days

Lightweight air flow switch with digital display can monitor data in real time. It is designed with water sensor to transmit data to the mainboard.

Specification

ModelATO-NPF2A751-04
Port Size Rc (PT)1/2 inch
Measured FluidAir, Nitrogen (N2)
Rated Flow Range50~500L/min
Minimum Set Unit5L/min
Accumulated Pulse Flow Rate Exchange Value
(Pulse Width: 50 ms)
5L/pulse
Display UnitsInstantaneous Flow RateL/min, CFMx10-1
Accumulated flowL, ft3 x10-1
Operating Pressure Range-50KPa~0.75MPa
Operating Fluid Temperature0~50℃
Power Supply VoltageDC12~24V±10%
Current Consumption170mA or less
Accumulated Flow Range0~999999L
Detection TypeHeater type
Accuracy±5% F.S.
Repeatability±2% F.S.
Temperature Characteristics±3% F.S. (15 to 35°C, 25°C reference), ±5% F.S. (0 to 50°C, 25°C reference)
OutputSwitch OutputNPN open collector maximum load current: 80 mA
Internal voltage drop: 1 V or less.
Maximum applied voltage: 30 V, 2 outputs
Accumulated Pulse OutputNPN or PNP open collector (same as switch output)
HysteresisHysteresis mode: Variable (can be set from 0)
Window comparator mode: 3-digit fixed
Response TimeLights up when output is turned ON
OUT1: Green
OUT2: Red
Status LED’s1 sec. or less
EnvironmentEnclosureIP65
Operating Temperature RangeOperating: 0 to 50°C
Stored: –25 to 85°C (with no freezing and condensation)
Withstand Voltage1000 VAC for 1 minute between terminals and housing
Insulation Resistance50 mΩ or more (500 VDC measured via megohmmeter) between terminals and housing
Noise Resistance1000V P-P Pulse width 1μs, duration 1 ns
Wire SizeM12 connector (3m)
Weight1kg


Flow Rate Diagram

Voltage Output: A: 1V, B: 5V
Current Output: A: 4mA, B: 20mA

Flow rate diagram of digital flow switch

Pin Number & Wire Color

Wire color of digital flow switch

Pin NumberContentWire Color
1DC (+)Brown
2OUT2White
3DC (-)Blue
4OUT1Black


Dimensions (Unit: mm)

Dimensions of digital flow switch

Details

Digital Flow Switch for Air Details

Tips for installing an air flow switch

  • The flow switch needs to be installed on the straight section of the pipe or air duct
  • It is necessary to ensure that there are long enough straight pipes before and after the installation position of the flow switch. The length of the normal straight pipe should be greater than 10 times the diameter of the pipe.
  • Avoid installing or wiring flow switches near elbows, other fittings, valves, drains, narrow or wide pipe sections, and any other features that may cause significant fluctuations in flow through the area.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Lightweight air flow switch with digital display can monitor data in real time. It is designed with water sensor to transmit data to the mainboard.

Specification

ModelATO-NPF2A751-04
Port Size Rc (PT)1/2 inch
Measured FluidAir, Nitrogen (N2)
Rated Flow Range50~500L/min
Minimum Set Unit5L/min
Accumulated Pulse Flow Rate Exchange Value
(Pulse Width: 50 ms)
5L/pulse
Display UnitsInstantaneous Flow RateL/min, CFMx10-1
Accumulated flowL, ft3 x10-1
Operating Pressure Range-50KPa~0.75MPa
Operating Fluid Temperature0~50℃
Power Supply VoltageDC12~24V±10%
Current Consumption170mA or less
Accumulated Flow Range0~999999L
Detection TypeHeater type
Accuracy±5% F.S.
Repeatability±2% F.S.
Temperature Characteristics±3% F.S. (15 to 35°C, 25°C reference), ±5% F.S. (0 to 50°C, 25°C reference)
OutputSwitch OutputNPN open collector maximum load current: 80 mA
Internal voltage drop: 1 V or less.
Maximum applied voltage: 30 V, 2 outputs
Accumulated Pulse OutputNPN or PNP open collector (same as switch output)
HysteresisHysteresis mode: Variable (can be set from 0)
Window comparator mode: 3-digit fixed
Response TimeLights up when output is turned ON
OUT1: Green
OUT2: Red
Status LED’s1 sec. or less
EnvironmentEnclosureIP65
Operating Temperature RangeOperating: 0 to 50°C
Stored: –25 to 85°C (with no freezing and condensation)
Withstand Voltage1000 VAC for 1 minute between terminals and housing
Insulation Resistance50 mΩ or more (500 VDC measured via megohmmeter) between terminals and housing
Noise Resistance1000V P-P Pulse width 1μs, duration 1 ns
Wire SizeM12 connector (3m)
Weight1kg


Flow Rate Diagram

Voltage Output: A: 1V, B: 5V
Current Output: A: 4mA, B: 20mA

Flow rate diagram of digital flow switch

Pin Number & Wire Color

Wire color of digital flow switch

Pin NumberContentWire Color
1DC (+)Brown
2OUT2White
3DC (-)Blue
4OUT1Black


Dimensions (Unit: mm)

Dimensions of digital flow switch

Details

Digital Flow Switch for Air Details

Tips for installing an air flow switch

  • The flow switch needs to be installed on the straight section of the pipe or air duct
  • It is necessary to ensure that there are long enough straight pipes before and after the installation position of the flow switch. The length of the normal straight pipe should be greater than 10 times the diameter of the pipe.
  • Avoid installing or wiring flow switches near elbows, other fittings, valves, drains, narrow or wide pipe sections, and any other features that may cause significant fluctuations in flow through the area.
Only registered users can write reviews
Customers who bought this item also bought

Electromagnetic Relay, DPDT, 12/24/110/220V coils

ATO-EMR-HH52P
$52.99
Electromagnetic relay features with 8 pins, DPDT(Double Pole Double Throw), clear and plastic housing. The coil voltages of 12V DC, 24VDC, 110V AC and 220V AC are available with contact load 5A/240V AC 28V DC and widely used in automatic control system.

High Precision Digital Pressure Switch, Rc1/ 8

ATO-DPS-30
$104.92
Lower cost digital pressure switch with takeover diameter Rc 1/ 8, high precision digital pressure switch has optional pressure range 0.0~101.0kPa/ -100.0~100.0kPa/ -100.0~1.000MPa, NPN or PNP open collector 1 output, NPN or PNP open collector 2 outputs can be chosen. High accuracy pressure switch has advantaged of simple operation, anti-vibration, high control accuracy and long service life.

24V DC 8.3A 200W Switching Power Supply

ATO-SMPS-200-24
$67.58
Low price switching power supply transforms the full range of AC input to a stable DC voltage of 24V at the rated power 200W and rated current 8.3A, high efficiency and high reliability SMPS ideal for LED lights, printers, computers, monitoring cameras, industrial control, etc.