High Precision Digital Pressure Switch, Rc1/ 8

$104.92
Lower cost digital pressure switch with takeover diameter Rc 1/ 8, high precision digital pressure switch has optional pressure range 0.0~101.0kPa/ -100.0~100.0kPa/ -100.0~1.000MPa, NPN or PNP open collector 1 output, NPN or PNP open collector 2 outputs can be chosen. High accuracy pressure switch has advantaged of simple operation, anti-vibration, high control accuracy and long service life.
SKU: ATO-DPS-30
*
*
Free Shipping
Delivery date: 6-12 days

Factory price digital air pressure switch featuring withstand pressure 500kPa- 1.5MPa, ±1% F.S. high acuuracy. The pressure switch is widely used in factory automation, chemical textile industry, medical equipment, chemical industry and other fields.

Features

  • Numbers are displayed in 2 colors.
  • Space-saving installation.
  • Digital pressure switch can be copied to 10 pressure switches at the same time.

Specification

ModelATO-NZSE30AATO-NZSE30AFATO-NISE30A
Rated pressure range0.0~101.0kPa-100.0~100.0kPa-100.0~1.000MPa
Display/ Set pressure range10.0~105.0kPa-105.0~105.0kPa-105.0~1.050MPa
Withstand pressure500kPa500kPa1.5MPa
Display/ Minimum unit setting0.1kPa0.1kPa0.001MPa
Switch outputOutput typesNPN or PNP open collector 1 output, NPN or PNP open collector 2 outputs
Maximum load current80mA
Maximum applied voltage28 V (at NPN output)
Residual voltage1 V or less (with load current of 80 mA)
Response time2.5 ms or less (with anti-chattering function: 20, 100, 500, 1000, 2000 ms)
Short circuit protectionYes
HysteresisHysteresis modeVariable (0 or above)
Window comparator mode
Analog outputVoltage outputOutput voltage (Rated pressure range)1~5V ± 2.5% F.S.1~5V ± 2.5% F.S.
Linearity±1% F.S.
Output impedenceApprox. 1kΩ
Current outputOutput voltage4~20mA±2.5% F.S2.4~20mA±2.5% F.S.
Linearity±1% F.S.
Load impedanceMaximum load impedance: Power supply voltage 12V: 300Ω, Power supply voltage 24V: 600Ω
Minimum load impedance: 50Ω
EnvironmentEnclosureIP40
Operating temperature rangeOperating: –5 to 50°C, Stored: –10 to 60°C (No freezing or condensation)
Operating humidity rangeOperating and stored: 35 to 85% RH (No condensation)
Withstand voltageAC1000V for 1 minute between terminals and housing
Insulation resisitance50MΩ or more (500 VDC measured via megohmmeter) between terminals and housing
FluidAir, Non-corrosive gas, Non-flammable gas
Takeover diameterRc1/ 8
Power supply voltage12 to 24 VDC ±10%, Ripple (p-p) 10% or less (With power supply polarity protection)
Current consumption40 mA or less
Repeatability±0.2% F.S.±1 digit
Display4-digit, 7-segment, 2-color LCD (Red/Green)
Display accurancy±2% F.S. ±1 digit (at 25°C ±3°C ambient temperature)
Indicator lightLights up when output is turned ON. OUT1: Green; OUT2: Red
Lead wire with connector±2% F.S. (at 25°C in an operating range of -5 to 50°C)
Temperature characteristics±2% F.S. (25°C reference)
Lead wireOilproof heavy-duty vinyl cable, 3 cores ø3.5, 2 m
4 cores; Conductor area: 0.15 mm2 (AWG26); Insulator O.D.: 1.0 mm
StandardsCE, UL/ CSA, RoHS

Internal Circuits and Wiring

Digital pressure switch wiring diagram of NPN 1 outputDigital pressure switch wiring diagram of PNP 1output

Digital pressure switch wiring diagram of NPN 2 outputDigital pressure switch wiring diagram of PNP 2 output

Dimension (mm)

Digital pressure switch dimension

Details

High Precision Digital Pressure Switch Details

Tips: Digital Pressure Switch Working Principle.

The digital pressure switch is mainly used to detect the pressure of the relevant detection part. It works by sensing the pressure of the external environment through built-in sensors. When the external pressure value exceeds or falls below the safety critical point, the sensor membrane changes, and then a control signal is sent to guide the switch to change. Therefore, when the ambient pressure returns to normal and critical, the inner membrane of the sensor will move to the original position, making the switch reset automatically, and then detect the medium pressure signal through the special CPU modular signal processing technology.

Product reviews
Pretty Impressed Digital Pressure Switch
5
Soberanis
Avatar
5/27/2024 3:54 AM
Our old house in the country had always used an analog pressure gauge. My parents were too old to see the reading gauge, so we planned to replace it with an electronic pressure switch during this renovation. It feels like a quality well-made switch and being able to dial in the exact pressures without dealing with the spring-type switch is a huge convenience.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Factory price digital air pressure switch featuring withstand pressure 500kPa- 1.5MPa, ±1% F.S. high acuuracy. The pressure switch is widely used in factory automation, chemical textile industry, medical equipment, chemical industry and other fields.

Features

  • Numbers are displayed in 2 colors.
  • Space-saving installation.
  • Digital pressure switch can be copied to 10 pressure switches at the same time.

Specification

ModelATO-NZSE30AATO-NZSE30AFATO-NISE30A
Rated pressure range0.0~101.0kPa-100.0~100.0kPa-100.0~1.000MPa
Display/ Set pressure range10.0~105.0kPa-105.0~105.0kPa-105.0~1.050MPa
Withstand pressure500kPa500kPa1.5MPa
Display/ Minimum unit setting0.1kPa0.1kPa0.001MPa
Switch outputOutput typesNPN or PNP open collector 1 output, NPN or PNP open collector 2 outputs
Maximum load current80mA
Maximum applied voltage28 V (at NPN output)
Residual voltage1 V or less (with load current of 80 mA)
Response time2.5 ms or less (with anti-chattering function: 20, 100, 500, 1000, 2000 ms)
Short circuit protectionYes
HysteresisHysteresis modeVariable (0 or above)
Window comparator mode
Analog outputVoltage outputOutput voltage (Rated pressure range)1~5V ± 2.5% F.S.1~5V ± 2.5% F.S.
Linearity±1% F.S.
Output impedenceApprox. 1kΩ
Current outputOutput voltage4~20mA±2.5% F.S2.4~20mA±2.5% F.S.
Linearity±1% F.S.
Load impedanceMaximum load impedance: Power supply voltage 12V: 300Ω, Power supply voltage 24V: 600Ω
Minimum load impedance: 50Ω
EnvironmentEnclosureIP40
Operating temperature rangeOperating: –5 to 50°C, Stored: –10 to 60°C (No freezing or condensation)
Operating humidity rangeOperating and stored: 35 to 85% RH (No condensation)
Withstand voltageAC1000V for 1 minute between terminals and housing
Insulation resisitance50MΩ or more (500 VDC measured via megohmmeter) between terminals and housing
FluidAir, Non-corrosive gas, Non-flammable gas
Takeover diameterRc1/ 8
Power supply voltage12 to 24 VDC ±10%, Ripple (p-p) 10% or less (With power supply polarity protection)
Current consumption40 mA or less
Repeatability±0.2% F.S.±1 digit
Display4-digit, 7-segment, 2-color LCD (Red/Green)
Display accurancy±2% F.S. ±1 digit (at 25°C ±3°C ambient temperature)
Indicator lightLights up when output is turned ON. OUT1: Green; OUT2: Red
Lead wire with connector±2% F.S. (at 25°C in an operating range of -5 to 50°C)
Temperature characteristics±2% F.S. (25°C reference)
Lead wireOilproof heavy-duty vinyl cable, 3 cores ø3.5, 2 m
4 cores; Conductor area: 0.15 mm2 (AWG26); Insulator O.D.: 1.0 mm
StandardsCE, UL/ CSA, RoHS

Internal Circuits and Wiring

Digital pressure switch wiring diagram of NPN 1 outputDigital pressure switch wiring diagram of PNP 1output

Digital pressure switch wiring diagram of NPN 2 outputDigital pressure switch wiring diagram of PNP 2 output

Dimension (mm)

Digital pressure switch dimension

Details

High Precision Digital Pressure Switch Details

Tips: Digital Pressure Switch Working Principle.

The digital pressure switch is mainly used to detect the pressure of the relevant detection part. It works by sensing the pressure of the external environment through built-in sensors. When the external pressure value exceeds or falls below the safety critical point, the sensor membrane changes, and then a control signal is sent to guide the switch to change. Therefore, when the ambient pressure returns to normal and critical, the inner membrane of the sensor will move to the original position, making the switch reset automatically, and then detect the medium pressure signal through the special CPU modular signal processing technology.

Product reviews
Pretty Impressed Digital Pressure Switch
5
Soberanis
Avatar
5/27/2024 3:54 AM
Our old house in the country had always used an analog pressure gauge. My parents were too old to see the reading gauge, so we planned to replace it with an electronic pressure switch during this renovation. It feels like a quality well-made switch and being able to dial in the exact pressures without dealing with the spring-type switch is a huge convenience.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Electromagnetic Relay, DPDT, 12/24/110/220V coils

ATO-EMR-HH52P
$52.99
Electromagnetic relay features with 8 pins, DPDT(Double Pole Double Throw), clear and plastic housing. The coil voltages of 12V DC, 24VDC, 110V AC and 220V AC are available with contact load 5A/240V AC 28V DC and widely used in automatic control system.

1/2" Digital Flow Switch for Air

ATO-FLOW-12
$231.79
Factory price digital air flow switch for sale, 1/2 inch thread port size, with digital display for real time monitoring, ±2% accuracy, measuring air and Nitrogen (N2), fluid temperature 0~50℃. This air flow switch comes with high sensitive sensor, which is designed for flow sensing to transmit data to the mainboard.

24V DC 8.3A 200W Switching Power Supply

ATO-SMPS-200-24
$67.58
Low price switching power supply transforms the full range of AC input to a stable DC voltage of 24V at the rated power 200W and rated current 8.3A, high efficiency and high reliability SMPS ideal for LED lights, printers, computers, monitoring cameras, industrial control, etc.