Micro Reaction Torque Sensor for Static Torque, 0.5-150 Nm

$175.93
Micro torque sensor is a reaction torque sensor for static torque measurement. Torque sensor is made of aluminium alloy, 150%FS safety overload, -20°C~+80°C operating temperature, low price. Reaction torque transducers have a capacity range from 0.5 Nm ~ 150 Nm and can measure both forward and reverse torque.
SKU: ATO-TQS-S04
*
*
Free Shipping
Delivery date: 6-12 days

Torque sensors have capacity range from 0.5 Nm, 1 Nm, 2 Nm, 10 Nm, 20 Nm, 30 Nm, 100 Nm to 150 Nm. Torque sensor capacity can be customized according to customer requirements. After purchasing one ATO torque sensor, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0~5V, 0~10V, 0~±10V, or 4-20mA.

Specification

ModelATO-DYJN-104
Shipping Weight1kg
Capacity Range *0-0.5 Nm ~ 0-150 Nm
Output Signal *DC 0-20mV, or equip load cell transmitter ATO-LCTR-OA for output signal DC 0-±5V/0-±10V/4-20mA/0-20mA
Sensitivity2.0mV/V
Zero Balance±2%FS
Non-linearity0.05%FS
Hysteresis0.05%FS
Repeatability0.05%FS
Creep0.05%FS/30min
Temperature Drift on Zero<0.05%F.S/10℃
Temperature Effect on Output<0.05%F.S/10℃
Operating Temperature-20℃~+80℃
Humidity0~90%RH
Impedance350Ω
Insulation Resistance≥5000MΩ/100VDC
Stability0.3%FS/year
Safety Overload150%F.S
Ultimate Overload200%F.S
Excitation VoltageDC 5-15V
MaterialAluminium alloy
Protection ClassIP65
Cable Length2m (Φ3mm)
WiringEXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


Torque Sensor Dimension (unit: mm)

Micro reaction torque sensor 0.5Nm to 150Nm dimension

Feature

  • This micro static torque sensor has high testing accuracy, good long-term stability and large range.
  • Torque sensor made of aluminum alloy, light weight and the use of silicone sealing, long-term corrosion resistance.
  • Sensor all aluminum alloy one-piece structure, solid structure, easy to install, reasonable force.

Micro Reaction Torque Sensor Force Diagram

Micro reaction torque sensor 150 nm force diagram

Application

Micro reaction torque sensor 150 nm application

Tips: Torque sensor has abnormal torque or high torque value on torque controller

When torque sensor is connected with a digital controller (meter), the controller display abnormal torque or high torque value.

Such a problem is common because of the non-correspondence between the torque meter range parameter and torque sensor range. Firstly check if the torque sensor is OK, disconnect the sensor away from the meter, and check the original signal of the sensor with the oscilloscope or multimeter. Check if the sensor zero point is 10 kHz, and check if the frequency value is normal after loading. If it is normal, the problem lies in the torque meter parameter.

Check if the meter parameter range adjustment is consistent with the sensor range. For instance, when the reaction torque sensor is in full range 10Nm, the meter parameter range value is 10.

If the meter display torque is fixed and the L red light on the panel is always ON, the problem lies in the meter alarm parameter settings. The upper limit alarm and lower limit alarm. Check if the meter parameter AL1F and AL2F parameters are 0. 0 is the upper limit alarm, it means to alarm when it is higher than the alarm setting value. 1 is the lower limit alarm, it means to alarm when it is lower than the alarm setting value. If set to 1, as long as the torque setting value is not reached, the meter has always been in the alarm status, and display has no reaction.

In this video, ATO will show you top ten most used sensors (sensing technologies).

Product reviews
Connection of 0.5-150Nm micro torque sensor
5
Deck
Avatar
5/14/2021 12:11 AM
Can your micro torque sensor be set up such that one end is connected to the motor while the other end is connected to nothing? What sort of reading will I get if this is the case?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, can't be connected like this, because if the other end is not connected, there will be no data to compare between the input and output, and the reading will be abnormal.
I would like more information on the signal outputs EXC /- and SIG /-.
5
Marz
Avatar
12/12/2022 8:10 PM
I need a better understanding of the signal outputs of the 0.5-150 Nm Micro Reaction Torque Sensor in our application. I would like more information on the signal outputs EXC /-  and SIG /-. Is the range 0 to 20mV for each, and what does each signal represent?  We are looking to design our own electrical interface circuit for processing the output. If you have an example electrical interface app note it would be very helpful.
Was this review helpful? Yes No (0/0)
ATO Responded
Regarding the signal wiring, EXC+/- is the excitation voltage; SIG+/- is the output signal line, and the default output signal is 0-20mv. If you would like to measure forward and reverse, it is recommended to configure the sensor with a transmitter to output 0-±5V, or 4-12-20ma for measuring forward and reverse torque. See transmitter specifications: https://www.ato.com/load-cell-transmitter-output-0-5v-4-20ma
Do you provide calibration certifcate for this type of torque sensor?
5
shangcheng
Avatar
4/28/2023 2:29 PM
I am interested in buying a 10 N-m reaction torque sensor. What will be the accuracy? Do you provide a calibration certificate for this product?
Was this review helpful? Yes No (0/0)
ATO Responded
The accuracy is about 0.03%, and a calibration certificate is provided after shipment.
Is there a manual of torque sensor you can share?
5
Rebecca
Avatar
6/27/2023 9:40 PM
I recently purchased the 0.5 Nm version of this torque sensor.  I'm get involved in calibration and testing. Is there a manual you can share? I know there are calibration set screws for zeroing and gain.
Was this review helpful? Yes No (0/0)
ATO Responded
The static torque sensor you purchased only needs to be calibrated at the acquisition end (data collector or transmitter connected to the sensor).
Calibration instructions are Not included with the sensor unless you purchased a data collector or transmitter.
How to connect a shaft to the torque sensor?
5
Shane
Avatar
11/13/2023 6:20 PM
I had a question regarding how a shaft could be connected to the micro torque sensor. Is the sensor hole a through hole? If so can a shaft run through the sensor so that you input the shaft through one end of the shaft and it exits the other end of the sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the sensor is through-hole. A rotational force is applied in the opposite direction (or a relative force is generated) through the fixing holes on the end faces of both sides of the fixed sensor, and the sensor outputs an analog signal.
What is the maximum axial load?
5
logan
Avatar
1/8/2024 1:05 AM
What is the maximum axial load your sensor can tolerate?
I'm asking about your model ATO-TQS-S04
With 3Nm FS
I need a new one
Was this review helpful? Yes No (0/0)
ATO Responded
The maximum axial load the sensor can bear is 50kg.
Doubt
5
Adrian
Avatar
3/29/2024 6:56 PM
Does the toque sensor measure torque in both directions?

Thanks in advance
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, it can measure torque in both directions.
The read speed
4
Windy
Avatar
8/26/2024 3:17 AM
What is the read speed from the Micro Reaction Torque Sensor for Static Torque, 0.5-150 Nm? Thank you for your help.
Was this review helpful? Yes No (0/0)
ATO Responded
The output signal response rate of this static torque sensor is about 5-10k. This acquisition speed also depends on the acquisition speed of the instrument or transmitter you use later.
Moment of inertia
5
Agger
Avatar
4/1/2025 7:28 PM
If possible, can I get the moment of inertia value of the torque sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, this torque sensor is for measuring static torque and is not recommended for dynamic rotation. If the rotation angle is small, the moment of inertia of this static torque sensor itself is 0.00395kg.cm².
Extraneous Load
5
Hayden
Avatar
6/20/2025 12:39 PM
Is there a document where I can view the extraneous load factors for this sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can provide that.
Extraneous Load
5
Hayden
Avatar
6/20/2025 12:40 PM
Is there a document where I can view the extraneous load factors for this sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
You can contact our sales team to obtain relevant documents. Our email addresses are: sales@ato.com and service@ato.com
Accuracy
5
Jack
Avatar
10/28/2025 8:10 PM
I am interested in the 0.5 N-m reaction torque sensor. What will be the accuracy?
Was this review helpful? Yes No (0/0)
ATO Responded
The specification you mentioned has a precision of 0.0015 N.
Clarification on output voltage
5
Jon
Avatar
12/15/2025 3:40 PM
I purchased the sensor with a 10Nm capacity, along with the 0-5V transmitter. Please clarify what the expected output should be with this comination. For example, does this mean that when the sensor is torqued to  10Nm, I should expect an output from the transmitter of  5.0V?

Thanks,
Jon
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the output signal and torque have a linear relationship. When the sensor torque is 10Nm, the expected output of the transmitter is 5.0V.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Torque sensors have capacity range from 0.5 Nm, 1 Nm, 2 Nm, 10 Nm, 20 Nm, 30 Nm, 100 Nm to 150 Nm. Torque sensor capacity can be customized according to customer requirements. After purchasing one ATO torque sensor, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0~5V, 0~10V, 0~±10V, or 4-20mA.

Specification

ModelATO-DYJN-104
Shipping Weight1kg
Capacity Range *0-0.5 Nm ~ 0-150 Nm
Output Signal *DC 0-20mV, or equip load cell transmitter ATO-LCTR-OA for output signal DC 0-±5V/0-±10V/4-20mA/0-20mA
Sensitivity2.0mV/V
Zero Balance±2%FS
Non-linearity0.05%FS
Hysteresis0.05%FS
Repeatability0.05%FS
Creep0.05%FS/30min
Temperature Drift on Zero<0.05%F.S/10℃
Temperature Effect on Output<0.05%F.S/10℃
Operating Temperature-20℃~+80℃
Humidity0~90%RH
Impedance350Ω
Insulation Resistance≥5000MΩ/100VDC
Stability0.3%FS/year
Safety Overload150%F.S
Ultimate Overload200%F.S
Excitation VoltageDC 5-15V
MaterialAluminium alloy
Protection ClassIP65
Cable Length2m (Φ3mm)
WiringEXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


Torque Sensor Dimension (unit: mm)

Micro reaction torque sensor 0.5Nm to 150Nm dimension

Feature

  • This micro static torque sensor has high testing accuracy, good long-term stability and large range.
  • Torque sensor made of aluminum alloy, light weight and the use of silicone sealing, long-term corrosion resistance.
  • Sensor all aluminum alloy one-piece structure, solid structure, easy to install, reasonable force.

Micro Reaction Torque Sensor Force Diagram

Micro reaction torque sensor 150 nm force diagram

Application

Micro reaction torque sensor 150 nm application

Tips: Torque sensor has abnormal torque or high torque value on torque controller

When torque sensor is connected with a digital controller (meter), the controller display abnormal torque or high torque value.

Such a problem is common because of the non-correspondence between the torque meter range parameter and torque sensor range. Firstly check if the torque sensor is OK, disconnect the sensor away from the meter, and check the original signal of the sensor with the oscilloscope or multimeter. Check if the sensor zero point is 10 kHz, and check if the frequency value is normal after loading. If it is normal, the problem lies in the torque meter parameter.

Check if the meter parameter range adjustment is consistent with the sensor range. For instance, when the reaction torque sensor is in full range 10Nm, the meter parameter range value is 10.

If the meter display torque is fixed and the L red light on the panel is always ON, the problem lies in the meter alarm parameter settings. The upper limit alarm and lower limit alarm. Check if the meter parameter AL1F and AL2F parameters are 0. 0 is the upper limit alarm, it means to alarm when it is higher than the alarm setting value. 1 is the lower limit alarm, it means to alarm when it is lower than the alarm setting value. If set to 1, as long as the torque setting value is not reached, the meter has always been in the alarm status, and display has no reaction.

Product reviews
Connection of 0.5-150Nm micro torque sensor
5
Deck
Avatar
5/14/2021 12:11 AM
Can your micro torque sensor be set up such that one end is connected to the motor while the other end is connected to nothing? What sort of reading will I get if this is the case?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, can't be connected like this, because if the other end is not connected, there will be no data to compare between the input and output, and the reading will be abnormal.
I would like more information on the signal outputs EXC /- and SIG /-.
5
Marz
Avatar
12/12/2022 8:10 PM
I need a better understanding of the signal outputs of the 0.5-150 Nm Micro Reaction Torque Sensor in our application. I would like more information on the signal outputs EXC /-  and SIG /-. Is the range 0 to 20mV for each, and what does each signal represent?  We are looking to design our own electrical interface circuit for processing the output. If you have an example electrical interface app note it would be very helpful.
Was this review helpful? Yes No (0/0)
ATO Responded
Regarding the signal wiring, EXC+/- is the excitation voltage; SIG+/- is the output signal line, and the default output signal is 0-20mv. If you would like to measure forward and reverse, it is recommended to configure the sensor with a transmitter to output 0-±5V, or 4-12-20ma for measuring forward and reverse torque. See transmitter specifications: https://www.ato.com/load-cell-transmitter-output-0-5v-4-20ma
Do you provide calibration certifcate for this type of torque sensor?
5
shangcheng
Avatar
4/28/2023 2:29 PM
I am interested in buying a 10 N-m reaction torque sensor. What will be the accuracy? Do you provide a calibration certificate for this product?
Was this review helpful? Yes No (0/0)
ATO Responded
The accuracy is about 0.03%, and a calibration certificate is provided after shipment.
Is there a manual of torque sensor you can share?
5
Rebecca
Avatar
6/27/2023 9:40 PM
I recently purchased the 0.5 Nm version of this torque sensor.  I'm get involved in calibration and testing. Is there a manual you can share? I know there are calibration set screws for zeroing and gain.
Was this review helpful? Yes No (0/0)
ATO Responded
The static torque sensor you purchased only needs to be calibrated at the acquisition end (data collector or transmitter connected to the sensor).
Calibration instructions are Not included with the sensor unless you purchased a data collector or transmitter.
How to connect a shaft to the torque sensor?
5
Shane
Avatar
11/13/2023 6:20 PM
I had a question regarding how a shaft could be connected to the micro torque sensor. Is the sensor hole a through hole? If so can a shaft run through the sensor so that you input the shaft through one end of the shaft and it exits the other end of the sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the sensor is through-hole. A rotational force is applied in the opposite direction (or a relative force is generated) through the fixing holes on the end faces of both sides of the fixed sensor, and the sensor outputs an analog signal.
What is the maximum axial load?
5
logan
Avatar
1/8/2024 1:05 AM
What is the maximum axial load your sensor can tolerate?
I'm asking about your model ATO-TQS-S04
With 3Nm FS
I need a new one
Was this review helpful? Yes No (0/0)
ATO Responded
The maximum axial load the sensor can bear is 50kg.
Doubt
5
Adrian
Avatar
3/29/2024 6:56 PM
Does the toque sensor measure torque in both directions?

Thanks in advance
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, it can measure torque in both directions.
The read speed
4
Windy
Avatar
8/26/2024 3:17 AM
What is the read speed from the Micro Reaction Torque Sensor for Static Torque, 0.5-150 Nm? Thank you for your help.
Was this review helpful? Yes No (0/0)
ATO Responded
The output signal response rate of this static torque sensor is about 5-10k. This acquisition speed also depends on the acquisition speed of the instrument or transmitter you use later.
Moment of inertia
5
Agger
Avatar
4/1/2025 7:28 PM
If possible, can I get the moment of inertia value of the torque sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, this torque sensor is for measuring static torque and is not recommended for dynamic rotation. If the rotation angle is small, the moment of inertia of this static torque sensor itself is 0.00395kg.cm².
Extraneous Load
5
Hayden
Avatar
6/20/2025 12:39 PM
Is there a document where I can view the extraneous load factors for this sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can provide that.
Extraneous Load
5
Hayden
Avatar
6/20/2025 12:40 PM
Is there a document where I can view the extraneous load factors for this sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
You can contact our sales team to obtain relevant documents. Our email addresses are: sales@ato.com and service@ato.com
Accuracy
5
Jack
Avatar
10/28/2025 8:10 PM
I am interested in the 0.5 N-m reaction torque sensor. What will be the accuracy?
Was this review helpful? Yes No (0/0)
ATO Responded
The specification you mentioned has a precision of 0.0015 N.
Clarification on output voltage
5
Jon
Avatar
12/15/2025 3:40 PM
I purchased the sensor with a 10Nm capacity, along with the 0-5V transmitter. Please clarify what the expected output should be with this comination. For example, does this mean that when the sensor is torqued to  10Nm, I should expect an output from the transmitter of  5.0V?

Thanks,
Jon
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the output signal and torque have a linear relationship. When the sensor torque is 10Nm, the expected output of the transmitter is 5.0V.
Only registered users can write reviews
Customers who bought this item also bought

Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

ATO-LCTR-OA
$81.27
Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.

Reaction Torque Sensor, Dual Flange, 20 Nm/100 Nm/5000 Nm to 10000 Nm

ATO-TQS-S01
$193.92
Torque sensor is a strain gauge sensor for static torque measurement. Static torque sensor has double-flange, a 5 pin male plug and no mounting base so it can be easy to install. Reaction torque sensors have a capacity range from 20 Nm/300 Nm/2000 Nm to 10000 Nm and can measure both forward and reverse torque.

Strain Gauge Load Cell, S type, 5kg/50kg/1000kg/3 ton to 20 ton

ATO-LC-S01
$88.41
S type load cell can bear both tension and pressure, with good output symmetry, high accuracy, compact structure and complete specifications. Strain gauge load cell can be applied for batching scale, electronic-mechanical scale, crane scales and other force value measurement and control.

Micro Load Cell, S type, 1kg/2kg/3kg/10kg to 50kg

ATO-LC-S03
$142.38
S type load cell can bear both tension and pressure, with good stability, good output symmetry, high accuracy, low temperature drift, compact structure and complete specifications. Micro load cell is suited to use in restricted spaces.

Micro Rotary Torque Sensor for Dynamic Torque Measurement, 0.1-5 Nm

ATO-TQS-D02
$914.02
Rotary torque sensor is a strain gauge sensor for dynamic micro torque measurement. It has two shafts, a 5 pin male plug and no mounting base. Micro torque sensors have a capacity range from 0.1 Nm/0.2 Nm/0.3 Nm/0.5 Nm/1 Nm/3 Nm to 5 Nm. Rotary torque transducer can measure both forward and reverse torque.