Vortex Flow Meter for Liquid/Gas/Steam, DN15-DN300

$957.85
Low cost vortex meter can measure the flow rate of liquids, gases and steam, applicable pipe size from DN15 to DN300. High accuracy vortex flowmeter has fully isolated design, optional LCD display for direct data reading, selectable various signal output like pulse output, 4-20mA output and RS485 communication, as well as integrated pressure / temperature compensation for precise compressor air or steam measurement. With clamp or flange connection and power by Li-ion battery, the vortex meter is easy to install, low-maintenance, reliable and safe.
SKU: ATO-FLOW-VOR
*
*
*
*
*
*
*
Free Shipping
Delivery date: 8-12 days

Cost-effective yet reliable vortex flow meters are suitable for pipe sizes from DN15, DN20, DN25, DN32, DN40 to DN300, applicable for liquids (water, high temperature water, chemical liquid, gasoline, etc.), gases (natural gas, compressed air, etc.), and saturated, superheated steam.

Specification

ModelATO-LUGB
Measuring MediaLiquids, gases, steam
Line Size *DN15-DN300
AccuracyGas (uncompensated): DN15-DN25 ±1.5%, DN32-DN200 ±1.0%, DN250-DN300 ±1.5%
Liquid (uncompensated):DN15-DN300 ±1.0%
With integrated temperature and pressure compensation: DN25-DN300 ±1.5%
Pressure Resistance ClassFor Clamp connection: DN15-DN25 4.0Mpa, DN65-DN100 2.5Mpa, Over DN125 1.6Mpa
For Flange connection: DN15-DN50 2.5Mpa, DN65-DN300 1.6Mpa
Range Ratio1:8~1:30
Medium Temperature-40°C ~ +260°C (for higher temperatures contact us)
Power Supply24V DC±5%, Li-ion battery (3.6V DC)
Compensation Mode *Temperature compensation, pressure compensation, or integrated temperature and pressure compensation (Optional)
Display *LCD display (Optional)
Output Signal *Frequency, or 4-20mA
Communication Interface *RS485 (Optional)
Connection *Clamp, or Flange connection
Body Material316 stainless steel
Protection ClassIP65
Ambient Temperature-10v ~ +60°C


Flow Range

Diameter Nominal (mm)LiquidGas
Flow Range (m3/h)Frequency Range (Hz)Flow Range (m3/h)Frequency Range (Hz)
150.3~535~4504~20300~1600
200.6~1029~3806~30230~1200
251.2~1625~3208~55170~1100
321.8~2018~20010~120100~1180
402~4010~19027~205130~1040
503~608~15035~38094~920
654~856~12060~64090~910
806.5~1304.1~8286~110055~690
10015~2204.7~69133~170042~536
12520~3503.2~57150~200038~475
15030~4502.8~43347~400033~380
20045~8002~31560~800022~315
25065~12501.5~25890~1100018~221
30095~20001.2~241360~1800016~213


Feature

Vortex flow meter features

  1. Newly Upgraded Intelligent Meter Head: The fourth generation dot-matrix LCD can display instantaneous/accumulative flow rate, medium temperature/pressure on the same screen.
  2. Fully Automatic SMT Packaging Technology: The use of high-quality analog chip components surface mount technology, effectively improve product capacity and reduce the defective rate of the flowmeter.
  3. High-strength Impact Resistant Parts: The vortex generator body has been polished for many times to resist pressure, and the one-piece casting makes the degree of impact resistance stronger (do not carry out water hammer impact).
  4. Professional Fish Scale Welding Technology: Welded by senior craftsmen by hand, presenting a fish scale welding pattern, the body is really super shock-resistant, to ensure that the meter is stable to use.

Dimension (unit: mm)

Vortex Flow Meter Dimension Drawing

Size (mm)H1aH1bH1cD1L1H2aH2bH2cL2
DN155254453554565540460370170
DN205314513615865545465375170
DN255314513615865550470380250
DN325314513615865563483393250
DN405294493598570578498408250
DN505414613719970590510420250
DN6555847838811870612532442250
DN8057349340313270625545455280
DN10059551542515670644564474300
DN12562154145118470674594504350
DN15064756747721170703623533350
DN20070562553526698757677587400
DN250757677587319114802730640450
DN300808728638370130860780690500

Note: This vortex flowmeter has 3 types of pillars a, b, c, with different sizes. You can check the height of the entire meter corresponding to the H superscript in the table above.
For the height of vortex flow meter with 150℃ sensor without compensation, see H superscript “c”; for the vortex flow meter with 150℃ sensor with compensation, see H superscript “b”; for the vortex flow meter with 260℃ sensor, see H superscript “b”; for the vortex flow meter with 300℃ sensor, see H superscript “a”.

Wiring Diagram

Vortex flow meter wiring diagram

Tips: What is a vortex flow meter?

A vortex flow meter is a flow measurement instrument based on the principle of the vortex effect. It works by installing a disturbing fluid (usually a cross-sectional protrusion) in a pipe, which creates regular vortices behind the fluid as it passes through. The frequency of the vortex is directly proportional to the fluid flow rate, so the flow rate can be calculated by measuring the vortex frequency.

Vortex flow meters are used in various industrial fields, especially in chemical, power, oil and gas industries. It is capable of measuring the flow of various fluids, including liquids, gases and steam. It is particularly suited to fluids that have a steady flow rate and do not settle easily or with small variations. Common application scenarios include measurement of vapor flow in pipelines, monitoring of liquid flow in chemical reactions, and industrial gas flow control.

Product reviews
Very accurate
5
Kaitlyn
Avatar
8/22/2021 8:19 PM
I used this DN15-DN300 vortex flow meter to measure the flow of water in the pipeline, and its measurement results are very accurate. I would recommend this product.
Was this review helpful? Yes No (0/0)
Could you please give us a recommend?
5
Edwin
Avatar
10/23/2023 8:51 PM
We’ve checked every option in the model section but it’s not suitable for us.

Could you please recommend one that compatible with oxygen gas, 4-20mA signal outlet and flow range degree bigger than 0-4200 lpm?
Was this review helpful? Yes No (0/0)
ATO Responded
We recommend using Vortex Flow Meter, SKU: ATO-FLOW-VOR
Sanitary connector
4
Yuti
Avatar
8/24/2026 2:29 AM
Can this vortex flow meter be connected to a sanitary connector or another connector compliant with ASME standards?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, we don't offer sanitary connectors. We manufacture industrial-grade products.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Cost-effective yet reliable vortex flow meters are suitable for pipe sizes from DN15, DN20, DN25, DN32, DN40 to DN300, applicable for liquids (water, high temperature water, chemical liquid, gasoline, etc.), gases (natural gas, compressed air, etc.), and saturated, superheated steam.

Specification

ModelATO-LUGB
Measuring MediaLiquids, gases, steam
Line Size *DN15-DN300
AccuracyGas (uncompensated): DN15-DN25 ±1.5%, DN32-DN200 ±1.0%, DN250-DN300 ±1.5%
Liquid (uncompensated):DN15-DN300 ±1.0%
With integrated temperature and pressure compensation: DN25-DN300 ±1.5%
Pressure Resistance ClassFor Clamp connection: DN15-DN25 4.0Mpa, DN65-DN100 2.5Mpa, Over DN125 1.6Mpa
For Flange connection: DN15-DN50 2.5Mpa, DN65-DN300 1.6Mpa
Range Ratio1:8~1:30
Medium Temperature-40°C ~ +260°C (for higher temperatures contact us)
Power Supply24V DC±5%, Li-ion battery (3.6V DC)
Compensation Mode *Temperature compensation, pressure compensation, or integrated temperature and pressure compensation (Optional)
Display *LCD display (Optional)
Output Signal *Frequency, or 4-20mA
Communication Interface *RS485 (Optional)
Connection *Clamp, or Flange connection
Body Material316 stainless steel
Protection ClassIP65
Ambient Temperature-10v ~ +60°C


Flow Range

Diameter Nominal (mm)LiquidGas
Flow Range (m3/h)Frequency Range (Hz)Flow Range (m3/h)Frequency Range (Hz)
150.3~535~4504~20300~1600
200.6~1029~3806~30230~1200
251.2~1625~3208~55170~1100
321.8~2018~20010~120100~1180
402~4010~19027~205130~1040
503~608~15035~38094~920
654~856~12060~64090~910
806.5~1304.1~8286~110055~690
10015~2204.7~69133~170042~536
12520~3503.2~57150~200038~475
15030~4502.8~43347~400033~380
20045~8002~31560~800022~315
25065~12501.5~25890~1100018~221
30095~20001.2~241360~1800016~213


Feature

Vortex flow meter features

  1. Newly Upgraded Intelligent Meter Head: The fourth generation dot-matrix LCD can display instantaneous/accumulative flow rate, medium temperature/pressure on the same screen.
  2. Fully Automatic SMT Packaging Technology: The use of high-quality analog chip components surface mount technology, effectively improve product capacity and reduce the defective rate of the flowmeter.
  3. High-strength Impact Resistant Parts: The vortex generator body has been polished for many times to resist pressure, and the one-piece casting makes the degree of impact resistance stronger (do not carry out water hammer impact).
  4. Professional Fish Scale Welding Technology: Welded by senior craftsmen by hand, presenting a fish scale welding pattern, the body is really super shock-resistant, to ensure that the meter is stable to use.

Dimension (unit: mm)

Vortex Flow Meter Dimension Drawing

Size (mm)H1aH1bH1cD1L1H2aH2bH2cL2
DN155254453554565540460370170
DN205314513615865545465375170
DN255314513615865550470380250
DN325314513615865563483393250
DN405294493598570578498408250
DN505414613719970590510420250
DN6555847838811870612532442250
DN8057349340313270625545455280
DN10059551542515670644564474300
DN12562154145118470674594504350
DN15064756747721170703623533350
DN20070562553526698757677587400
DN250757677587319114802730640450
DN300808728638370130860780690500

Note: This vortex flowmeter has 3 types of pillars a, b, c, with different sizes. You can check the height of the entire meter corresponding to the H superscript in the table above.
For the height of vortex flow meter with 150℃ sensor without compensation, see H superscript “c”; for the vortex flow meter with 150℃ sensor with compensation, see H superscript “b”; for the vortex flow meter with 260℃ sensor, see H superscript “b”; for the vortex flow meter with 300℃ sensor, see H superscript “a”.

Wiring Diagram

Vortex flow meter wiring diagram

Tips: What is a vortex flow meter?

A vortex flow meter is a flow measurement instrument based on the principle of the vortex effect. It works by installing a disturbing fluid (usually a cross-sectional protrusion) in a pipe, which creates regular vortices behind the fluid as it passes through. The frequency of the vortex is directly proportional to the fluid flow rate, so the flow rate can be calculated by measuring the vortex frequency.

Vortex flow meters are used in various industrial fields, especially in chemical, power, oil and gas industries. It is capable of measuring the flow of various fluids, including liquids, gases and steam. It is particularly suited to fluids that have a steady flow rate and do not settle easily or with small variations. Common application scenarios include measurement of vapor flow in pipelines, monitoring of liquid flow in chemical reactions, and industrial gas flow control.

Product reviews
Very accurate
5
Kaitlyn
Avatar
8/22/2021 8:19 PM
I used this DN15-DN300 vortex flow meter to measure the flow of water in the pipeline, and its measurement results are very accurate. I would recommend this product.
Was this review helpful? Yes No (0/0)
Could you please give us a recommend?
5
Edwin
Avatar
10/23/2023 8:51 PM
We’ve checked every option in the model section but it’s not suitable for us.

Could you please recommend one that compatible with oxygen gas, 4-20mA signal outlet and flow range degree bigger than 0-4200 lpm?
Was this review helpful? Yes No (0/0)
ATO Responded
We recommend using Vortex Flow Meter, SKU: ATO-FLOW-VOR
Sanitary connector
4
Yuti
Avatar
8/24/2026 2:29 AM
Can this vortex flow meter be connected to a sanitary connector or another connector compliant with ASME standards?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, we don't offer sanitary connectors. We manufacture industrial-grade products.
Only registered users can write reviews