Liquid Turbine Flow Meter for Water/Oil, DN4-DN200

$699.59
Low price turbine flow meter can be used for liquid flow measurement such as water and oil in the pipe size of DN4 ~ DN200 mm, 1.0%R measuring accuracy, 24V DC power supply, threaded or flange connection. Optional 4-20mA signal output and LCD display instantaneous flow / accumulative flow, RS485 also available. High accuracy, and good repeatability, best turbine flow meter for petroleum, chemical and other industries.
SKU: ATO-FLOW-TUR
*
*
*
*
Free Shipping
Delivery date: 8-12 days

The liquid turbine flow meter is used to measure the flow rate of low viscosity liquid in closed pipe ranging from DN4 to DN200 mm. With the advantages of high accuracy, good repeatability, simple structure, small pressure loss and convenient maintenance, the turbine flowmeter is widely applied in the petroleum, chemical, metallurgy, water supply, paper and other industries.

Specification

ModelATO-LWGY
Measuring Mediumliquid (water, liquefied petroleum gas, refined oil, light crude oil, organic liquid, inorganic liquid and other liquid without fiber, particulate impurities)
Medium Viscosity< 5 × 10-6 m2/s (for the liquid with more than 5 × 10-6 m2/s, the flowmeter needs to be calibrated before using.)
Nominal Diameter *DN4 ~ DN200 mm
Measurement Accuracy1.0%R (For higher accuracy 0.5%R, please contact us.)
Pressure Range6.3MPa, 2.5MPa, 1.6MPa
Medium Temperature-20°C ~ +120°C (stainless steel measuring tube)
Environmental ConditionsAmbient temperature: -20°C ~ +60°C
Relative humidity: 5% to 95%
Atmospheric pressure: 86kPa ~ 106kPa
Power Supply24V DC
Output Signal *three-wire pulse output, or two-wire 4-20mA output (Optional)
Display *LCD screen, can display instantaneous flow / accumulative flow (Optional)
ConnectionThreaded connection (DN4~DN40)
Flange connection (DN50 ~ DN200)
Communication *RS485 (Optional)
Protection ClassIP65 (IP68 can be customized)


Flow Range

Size (mm)Flow Range (m3/h)Pressure RangeConnection
DN40.04 ~ 0.46.3MPaThreaded
DN60.1 ~ 0.66.3MPaThreaded
DN100.2 ~ 1.26.3MPaThreaded
DN150.6 ~ 66.3MPaThreaded
DN200.8 ~ 86.3MPaThreaded
DN251 ~ 106.3MPaThreaded
DN321.5 ~ 156.3MPaThreaded
DN402 ~ 206.3MPaThreaded
DN504 ~ 402.5MPaFlange
DN657 ~ 701.6MPaFlange
DN8010 ~ 1001.6MPaFlange
DN10020 ~ 2001.6MPaFlange
DN12525 ~ 2501.6MPaFlange
DN15030 ~ 3001.6MPaFlange
DN20080 ~ 8001.6MPaFlange


Dimension

Turbine flow meter dimension

Size (mm)L (mm)G (inch)K (mm)d (mm)n (number of holes)
DN4225G1/2"———
DN6225G1/2"———
DN10345G1/2"———
DN1575G1"Ф65Ф144
DN2080G1"Ф75Ф144
DN25100G5/4"Ф85Ф144
DN32140G2"Ф100Ф144
DN40140G2"Ф110Ф184
DN50150G5/2"Ф125Ф184
DN65170—Ф145Ф184
DN80200—Ф160Ф188
DN100220—Ф180Ф188
DN125250—Ф210Ф188
DN150300—Ф240Ф228
DN200360—Ф295Ф2212


Feature

Turbine flow meter feature

  1. Selected 304 stainless steel material, is non-conductive stainless steel body, can isolate the external magnetic field.
  2. Precision milled impeller molded in one piece, CNC precision machining, more accurate data.
  3. Blocked circuit board upgraded with intelligent algorithm, effectively filtering stray waves.
  4. Metal electrical interface effectively isolates water and dust, no fear of wind and rain.

Application

Turbine flow meter application

Tips: Turbine Flow Meter Working Principle

When the fluid passes through the sensor of the turbine flow meter through the pipe, the impeller in the sensor rotates under the impulse of the fluid. The impeller changes the magneto-resistance in the magneto-electric induction system periodically, so that the magnetic flux through the coil changes periodically and produces the electric pulse signal. After the circuit amplification processing, the output has a certain amplitude of the continuous rectangular pulse, the field can directly display the measured flow, or the signal can be transmitted to the display instrument or communication output.

Precautions for turbine flowmeter installation and use

  1. The turbine flow meter should be away from external electric and magnetic fields.
  2. The upstream end of the flowmeter is recommended to keep at least 10D straight pipe segment (D is the nominal diameter of the pipeline), and the downstream end is not less than 5D straight pipe segment.
  3. When there are impurities in the fluid, filter should be added.
  4. At the beginning of the use of the turbine flowmeter, the flow sensor should be slowly filled with liquid, and then the outlet valve should be opened. It is strictly prohibited for the sensor to be impacted by high-speed fluid when it is in the state of no liquid.
Product reviews
Liquid turbine flow meters for water/oil can save costs
5
Brunom
Avatar
7/29/2021 9:14 PM
For the first time shopping online, this liquid turbine flowmeter can save energy and greatly reduce the cost of use. This is a very pleasant shopping experience, and I will continue to buy it if needed in the future.
Was this review helpful? Yes No (0/0)
Sturdy flow meter
5
Mar
Avatar
6/30/2022 3:12 AM
I use this flow meter to fill the RV fresh water tank. It works great. It is sturdy and when I use it I ensure that I support where the hose connects to the unit. Overall a nice item to measure volume delivered.
Was this review helpful? Yes No (0/0)
Satisfied with LCD display
5
Eambay
Avatar
11/1/2022 8:31 PM
I've been using this liquid turbine flow meter for three months. I am very satisfied with the LCD display on the flow meter, so that I can easily know the accurate data. I will order more.
Was this review helpful? Yes No (0/0)
Could you provide some guidance on this flowmeter with different pressures?
5
Womin
Avatar
3/3/2023 12:49 AM
I found the flowmeter displays different numbers with different pressures. I suppose the flowmeter can display the same number no matter what the working pressure is. Is that true? Could you provide some guidance on this flowmeter with different pressures?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, any gas, the same pipeline, the flow rate will change with the change of pressure. Unfortunately, we do Not provide this flowmeter  amount of change in flow data corresponding to each pressure.
Is the DN4 liquid turbine flow meter rated for vacuum?
5
David
Avatar
11/8/2023 6:13 PM
Is the DN4 liquid turbine flow meter rated for vacuum?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, our liquid turbine flow meter does not have a vacuum level. To recommend a suitable model we also need to know: What medium do you want to measure? What is the flow range? What is the specific working environment?
The medium I am measuring is water.
5
Eilijah
Avatar
11/12/2023 6:08 PM
The medium I am measuring is water. The planned flow range is 0.05-1.5 GPM, but I can accept smaller flows within this range. I work in a non-hazardous area and do not need to maintain sanitation. So can I use this flow meter?
Was this review helpful? Yes No (0/0)
ATO Responded
The flow range is 0.05-1.5GPM, since this range is too small, we do Not recommend using our flow meter.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The liquid turbine flow meter is used to measure the flow rate of low viscosity liquid in closed pipe ranging from DN4 to DN200 mm. With the advantages of high accuracy, good repeatability, simple structure, small pressure loss and convenient maintenance, the turbine flowmeter is widely applied in the petroleum, chemical, metallurgy, water supply, paper and other industries.

Specification

ModelATO-LWGY
Measuring Mediumliquid (water, liquefied petroleum gas, refined oil, light crude oil, organic liquid, inorganic liquid and other liquid without fiber, particulate impurities)
Medium Viscosity< 5 × 10-6 m2/s (for the liquid with more than 5 × 10-6 m2/s, the flowmeter needs to be calibrated before using.)
Nominal Diameter *DN4 ~ DN200 mm
Measurement Accuracy1.0%R (For higher accuracy 0.5%R, please contact us.)
Pressure Range6.3MPa, 2.5MPa, 1.6MPa
Medium Temperature-20°C ~ +120°C (stainless steel measuring tube)
Environmental ConditionsAmbient temperature: -20°C ~ +60°C
Relative humidity: 5% to 95%
Atmospheric pressure: 86kPa ~ 106kPa
Power Supply24V DC
Output Signal *three-wire pulse output, or two-wire 4-20mA output (Optional)
Display *LCD screen, can display instantaneous flow / accumulative flow (Optional)
ConnectionThreaded connection (DN4~DN40)
Flange connection (DN50 ~ DN200)
Communication *RS485 (Optional)
Protection ClassIP65 (IP68 can be customized)


Flow Range

Size (mm)Flow Range (m3/h)Pressure RangeConnection
DN40.04 ~ 0.46.3MPaThreaded
DN60.1 ~ 0.66.3MPaThreaded
DN100.2 ~ 1.26.3MPaThreaded
DN150.6 ~ 66.3MPaThreaded
DN200.8 ~ 86.3MPaThreaded
DN251 ~ 106.3MPaThreaded
DN321.5 ~ 156.3MPaThreaded
DN402 ~ 206.3MPaThreaded
DN504 ~ 402.5MPaFlange
DN657 ~ 701.6MPaFlange
DN8010 ~ 1001.6MPaFlange
DN10020 ~ 2001.6MPaFlange
DN12525 ~ 2501.6MPaFlange
DN15030 ~ 3001.6MPaFlange
DN20080 ~ 8001.6MPaFlange


Dimension

Turbine flow meter dimension

Size (mm)L (mm)G (inch)K (mm)d (mm)n (number of holes)
DN4225G1/2"———
DN6225G1/2"———
DN10345G1/2"———
DN1575G1"Ф65Ф144
DN2080G1"Ф75Ф144
DN25100G5/4"Ф85Ф144
DN32140G2"Ф100Ф144
DN40140G2"Ф110Ф184
DN50150G5/2"Ф125Ф184
DN65170—Ф145Ф184
DN80200—Ф160Ф188
DN100220—Ф180Ф188
DN125250—Ф210Ф188
DN150300—Ф240Ф228
DN200360—Ф295Ф2212


Feature

Turbine flow meter feature

  1. Selected 304 stainless steel material, is non-conductive stainless steel body, can isolate the external magnetic field.
  2. Precision milled impeller molded in one piece, CNC precision machining, more accurate data.
  3. Blocked circuit board upgraded with intelligent algorithm, effectively filtering stray waves.
  4. Metal electrical interface effectively isolates water and dust, no fear of wind and rain.

Application

Turbine flow meter application

Tips: Turbine Flow Meter Working Principle

When the fluid passes through the sensor of the turbine flow meter through the pipe, the impeller in the sensor rotates under the impulse of the fluid. The impeller changes the magneto-resistance in the magneto-electric induction system periodically, so that the magnetic flux through the coil changes periodically and produces the electric pulse signal. After the circuit amplification processing, the output has a certain amplitude of the continuous rectangular pulse, the field can directly display the measured flow, or the signal can be transmitted to the display instrument or communication output.

Precautions for turbine flowmeter installation and use

  1. The turbine flow meter should be away from external electric and magnetic fields.
  2. The upstream end of the flowmeter is recommended to keep at least 10D straight pipe segment (D is the nominal diameter of the pipeline), and the downstream end is not less than 5D straight pipe segment.
  3. When there are impurities in the fluid, filter should be added.
  4. At the beginning of the use of the turbine flowmeter, the flow sensor should be slowly filled with liquid, and then the outlet valve should be opened. It is strictly prohibited for the sensor to be impacted by high-speed fluid when it is in the state of no liquid.
Product reviews
Liquid turbine flow meters for water/oil can save costs
5
Brunom
Avatar
7/29/2021 9:14 PM
For the first time shopping online, this liquid turbine flowmeter can save energy and greatly reduce the cost of use. This is a very pleasant shopping experience, and I will continue to buy it if needed in the future.
Was this review helpful? Yes No (0/0)
Sturdy flow meter
5
Mar
Avatar
6/30/2022 3:12 AM
I use this flow meter to fill the RV fresh water tank. It works great. It is sturdy and when I use it I ensure that I support where the hose connects to the unit. Overall a nice item to measure volume delivered.
Was this review helpful? Yes No (0/0)
Satisfied with LCD display
5
Eambay
Avatar
11/1/2022 8:31 PM
I've been using this liquid turbine flow meter for three months. I am very satisfied with the LCD display on the flow meter, so that I can easily know the accurate data. I will order more.
Was this review helpful? Yes No (0/0)
Could you provide some guidance on this flowmeter with different pressures?
5
Womin
Avatar
3/3/2023 12:49 AM
I found the flowmeter displays different numbers with different pressures. I suppose the flowmeter can display the same number no matter what the working pressure is. Is that true? Could you provide some guidance on this flowmeter with different pressures?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, any gas, the same pipeline, the flow rate will change with the change of pressure. Unfortunately, we do Not provide this flowmeter  amount of change in flow data corresponding to each pressure.
Is the DN4 liquid turbine flow meter rated for vacuum?
5
David
Avatar
11/8/2023 6:13 PM
Is the DN4 liquid turbine flow meter rated for vacuum?
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, our liquid turbine flow meter does not have a vacuum level. To recommend a suitable model we also need to know: What medium do you want to measure? What is the flow range? What is the specific working environment?
The medium I am measuring is water.
5
Eilijah
Avatar
11/12/2023 6:08 PM
The medium I am measuring is water. The planned flow range is 0.05-1.5 GPM, but I can accept smaller flows within this range. I work in a non-hazardous area and do not need to maintain sanitation. So can I use this flow meter?
Was this review helpful? Yes No (0/0)
ATO Responded
The flow range is 0.05-1.5GPM, since this range is too small, we do Not recommend using our flow meter.
Only registered users can write reviews