Portable Ultrasonic Flow Meter for Water, Clamp-On

$1,153.86
Portable ultrasonic flow meter is designed for wide pipe sizes ranging from 40mm to 1200mm in nominal diameter with accuracy ±1% of reading. Big LCD display, built-in large capacity data logger, batteries-powered for long working.
SKU: ATO-FLOW-2100H
*
Free Shipping
Delivery date: 6-12 days

With clamp-on installation, the non invasive flow meter is easy to install, convenient to operate, and less maintenance, suitable for virtually all pure liquids like water, gasoline, oils and so on. High accuracy, good repeatability and low price.

Specification

ModelATO-TDS-2100H
Accuracy±1% of reading @ flow rate >0.2m/s
Linearity0.50%
Repeatability0.20%
Response Time0-999 seconds, user-selectable
Velocity0.2~32m/s
Pipe Size40mm-1200mm
Totalizer7-digit totals for net, positive and negative flow respectively
Liquid TypeVirtually all liquids
Transducer (Optional)*Standard clamp-on transducers: small/medium/large; High-temperature clamp-on transducers: small/medium/large
(See the "Transducer Selection" table below for the details)
Protection GradeTransducer: IP67
Transducer Cable LengthStandard 5m x 2
Operating TemperatureMain unit: -30°C~90°C, Transducers: -30°C~160°C
Operating HumidityMain unit: ≤85%RH
Power Supply3 AAA built-in Ni-H batteries (Can work over 12 hours after a full charge), external charger with 100V-240VAC
Display4 x 16 English letters
Signal OutputOCT output (6~1000ms)
Data LoggerBuilt-in data logger, can store over 2000 lines of data
Housing MaterialABS
Main Unit Size100*66*20mm
Main Unit Weight500g with batteries

Note: As this product is transported by air, ultrasonic coupling agent is not included. You can use 20W-40 engine oil, lubricating grease, Vaseline, etc. as substitutes, or find ultrasonic-specific coupling agent locally.

Dimension (unit: mm)

Ultrasonic flow meter size

Features

  • Convenient use, fast testing & less maintenance. The non invasive ultrasonic flow meter can measure the liquid flow rate inside the pipe without disassembling the pipe and pressure loss
  • Applicable for various pure liquids including water, tapwater, seawater, beers, lubricants, gasoline, cooking oil, etc.
  • Compatible with various material pipes like cast iron pipe, galvanized pipe, stainless steel pipe, PVC pipe, aluminum pipe, etc. The ultrasonic flow meter with the proper clamp-on transducer does well in these applications.
  • Measuring diameter covers a wide range of DN40-DN1200, suitable for all kinds of industrial site installation and use.
  • Big LCD display the instantaneous flow rate and cumulative flow rate at the real time.
  • Built-in data logger, the ultrasonic flowmeter can storage 2000 lines of data.

Details

Ultrasonic flow meter detail

  1. Ultrasonic flow meter is bilingual windowed operation, with backlight night can also be clearly read.
  2. Standard aviation plug interface design, easy to disassemble and install upstream and downstream interface labeling, concise and clear.
  3. Communication interface is a standard RS232 interface, support the upper computer real-time communication.

Transducer Selection

TransducerMeasuring Pipe Size RangeTemperature RangeDimensions
Standard clamp-on transducer - SmallDN40-DN100-30°C~90°C45*25*32mm
Standard clamp-on transducer - MediumDN50-DN70064*39*44mm
Standard clamp-on transducer - LargeDN300-DN120097*54*33mm
High-temp clamp-on transducer - SmallDN40-DN100-30°C~160°C45*25*32mm
High-temp clamp-on transducer - MediumDN50-DN70064*39*44mm
High-temp clamp-on transducer - LargeDN300-DN120097*54*33mm


Transducer Installation

1. Choosing right installation position

Ultrasonic flow meter transducer installing position

  • The pipeline where the transducer is installed must have a long enough straight pipe section, of course, the longer the better, generally 10 times the pipe diameter upstream, 5 times the pipe diameter downstream, and 30 times the pipe diameter from the pump port. At the same time, ensure that the liquid in this section must be full.
  • Make sure that the temperature range of the pipe under test is within the applicable range of the sensor, usually at room temperature.
  • Take the corrosion or scaling of the pipeline into consideration. It is better to choose a newer pipeline for the measurement. If it is not available, subtract the corrosion from the pipe wall thickness or consider scaling as the pipe lining.

2. Transducer installation method

  • Z-installation method: generally suitable for the pipes above DN100mm

Ultrasonic flow meter transducer Z installation

  • V-installation method: generally suitable for the DN20-300mm pipes

Ultrasonic flow meter transducer V installation.

* The installation distance is shown after entering the pipe parameters into the ultrasonic flow meter.

Tips: How to install portable clamp-on ultrasonic flow meter?

Installation of portable clamp-on ultrasonic flowmeter is very simple. Simply clamp the sensor on the outside of the pipe and ensure that the sensor and pipe surface contact is good. In the setup process, the user needs to ensure that the sensor and the pipe contact surface clean, and in accordance with the requirements of the equipment manual to choose the appropriate installation location. After installation, the device will be automatically calibrated to ensure the accuracy of the measurement.

Portable ultrasonic flow meters are widely used in a variety of fields, especially the need for temporary or rapid measurement of the flow rate of the occasion. Common applications include: Water treatment industry, petrochemical, heating, ventilation and air conditioning (HVAC), energy management, power industry. Because it does not need to destroy the pipeline and easy to carry, it is particularly suitable for emergency flow detection, equipment maintenance and on-site diagnosis and other scenarios.

Product reviews
Ultrasonic flow meter measurement
5
Susanb
Avatar
6/30/2021 11:36 PM
We are looking to measure tile drainage outflow velocity. Pipe size varies from 4 to 24 inches with water levels ranging from 0.25 to 4 inches. Would this product be able to measure this low amount of water?
Was this review helpful? Yes No (0/0)
ATO Responded
SKU: ATO-FLOW-2000H >>> Portable Clamp-On Ultrasonic Flow Meter for Water
See specs, price, and you can order online by credit card on: https://www.ato.com/ultrasonic-flow-meter
Unfortunately, this flow meter can only measure water flow when the pipe is full.
Love it.
5
Owen
Avatar
4/15/2022 2:21 AM
Works great on copper tubes/ pipes. Product is fairly easy to setup. Seems to give stable and accurate readings. Very acurate once properly set up.
Was this review helpful? Yes No (0/0)
Easy to monitor
5
Visonelet
Avatar
11/16/2022 11:12 PM
This little ultrasonic flow meter makes it so easy to monitor how much water I am putting in my RV tanks. I mainly use it for filling my black tank for a good flush. I will order more.
Was this review helpful? Yes No (0/0)
A commercial offer for the flow meter
5
candice
Avatar
8/20/2023 8:51 PM
Good morning, | ask you to provide a commercial offer for the supply of:
Portable ultrasonic liquid flow meter with the following specifications:
- Measurement method - consignment note ultrasonic.
- Number of measurement channels -2
- Charger - 230 VAC current (output and ground - Standard for Europe)
Was this review helpful? Yes No (0/0)
ATO Responded
We recommend Portable Clamp-On Ultrasonic Flow Meter.
This flow meter meets your needs. Please choose the combination of medium probe + large probe.
But this flowmeter is a single-channel ultrasonic flowmeter, which can only measure one channel at a time.
Regarding the number of transducers:
4
Bethel
Avatar
7/17/2026 12:38 AM
When ordering this flow meter, are the listed transducers a pair? Does each transducer come with its own cable, or does the entire flow meter set only include one pair of cables?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the transducers listed for this flow meter (SKU: ATO-FLOW-2100H) are supplied in pairs. Each transducer (upstream and downstream) comes with its own cable, and the flow meter also includes a power adapter.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

With clamp-on installation, the non invasive flow meter is easy to install, convenient to operate, and less maintenance, suitable for virtually all pure liquids like water, gasoline, oils and so on. High accuracy, good repeatability and low price.

Specification

ModelATO-TDS-2100H
Accuracy±1% of reading @ flow rate >0.2m/s
Linearity0.50%
Repeatability0.20%
Response Time0-999 seconds, user-selectable
Velocity0.2~32m/s
Pipe Size40mm-1200mm
Totalizer7-digit totals for net, positive and negative flow respectively
Liquid TypeVirtually all liquids
Transducer (Optional)*Standard clamp-on transducers: small/medium/large; High-temperature clamp-on transducers: small/medium/large
(See the "Transducer Selection" table below for the details)
Protection GradeTransducer: IP67
Transducer Cable LengthStandard 5m x 2
Operating TemperatureMain unit: -30°C~90°C, Transducers: -30°C~160°C
Operating HumidityMain unit: ≤85%RH
Power Supply3 AAA built-in Ni-H batteries (Can work over 12 hours after a full charge), external charger with 100V-240VAC
Display4 x 16 English letters
Signal OutputOCT output (6~1000ms)
Data LoggerBuilt-in data logger, can store over 2000 lines of data
Housing MaterialABS
Main Unit Size100*66*20mm
Main Unit Weight500g with batteries

Note: As this product is transported by air, ultrasonic coupling agent is not included. You can use 20W-40 engine oil, lubricating grease, Vaseline, etc. as substitutes, or find ultrasonic-specific coupling agent locally.

Dimension (unit: mm)

Ultrasonic flow meter size

Features

  • Convenient use, fast testing & less maintenance. The non invasive ultrasonic flow meter can measure the liquid flow rate inside the pipe without disassembling the pipe and pressure loss
  • Applicable for various pure liquids including water, tapwater, seawater, beers, lubricants, gasoline, cooking oil, etc.
  • Compatible with various material pipes like cast iron pipe, galvanized pipe, stainless steel pipe, PVC pipe, aluminum pipe, etc. The ultrasonic flow meter with the proper clamp-on transducer does well in these applications.
  • Measuring diameter covers a wide range of DN40-DN1200, suitable for all kinds of industrial site installation and use.
  • Big LCD display the instantaneous flow rate and cumulative flow rate at the real time.
  • Built-in data logger, the ultrasonic flowmeter can storage 2000 lines of data.

Details

Ultrasonic flow meter detail

  1. Ultrasonic flow meter is bilingual windowed operation, with backlight night can also be clearly read.
  2. Standard aviation plug interface design, easy to disassemble and install upstream and downstream interface labeling, concise and clear.
  3. Communication interface is a standard RS232 interface, support the upper computer real-time communication.

Transducer Selection

TransducerMeasuring Pipe Size RangeTemperature RangeDimensions
Standard clamp-on transducer - SmallDN40-DN100-30°C~90°C45*25*32mm
Standard clamp-on transducer - MediumDN50-DN70064*39*44mm
Standard clamp-on transducer - LargeDN300-DN120097*54*33mm
High-temp clamp-on transducer - SmallDN40-DN100-30°C~160°C45*25*32mm
High-temp clamp-on transducer - MediumDN50-DN70064*39*44mm
High-temp clamp-on transducer - LargeDN300-DN120097*54*33mm


Transducer Installation

1. Choosing right installation position

Ultrasonic flow meter transducer installing position

  • The pipeline where the transducer is installed must have a long enough straight pipe section, of course, the longer the better, generally 10 times the pipe diameter upstream, 5 times the pipe diameter downstream, and 30 times the pipe diameter from the pump port. At the same time, ensure that the liquid in this section must be full.
  • Make sure that the temperature range of the pipe under test is within the applicable range of the sensor, usually at room temperature.
  • Take the corrosion or scaling of the pipeline into consideration. It is better to choose a newer pipeline for the measurement. If it is not available, subtract the corrosion from the pipe wall thickness or consider scaling as the pipe lining.

2. Transducer installation method

  • Z-installation method: generally suitable for the pipes above DN100mm

Ultrasonic flow meter transducer Z installation

  • V-installation method: generally suitable for the DN20-300mm pipes

Ultrasonic flow meter transducer V installation.

* The installation distance is shown after entering the pipe parameters into the ultrasonic flow meter.

Tips: How to install portable clamp-on ultrasonic flow meter?

Installation of portable clamp-on ultrasonic flowmeter is very simple. Simply clamp the sensor on the outside of the pipe and ensure that the sensor and pipe surface contact is good. In the setup process, the user needs to ensure that the sensor and the pipe contact surface clean, and in accordance with the requirements of the equipment manual to choose the appropriate installation location. After installation, the device will be automatically calibrated to ensure the accuracy of the measurement.

Portable ultrasonic flow meters are widely used in a variety of fields, especially the need for temporary or rapid measurement of the flow rate of the occasion. Common applications include: Water treatment industry, petrochemical, heating, ventilation and air conditioning (HVAC), energy management, power industry. Because it does not need to destroy the pipeline and easy to carry, it is particularly suitable for emergency flow detection, equipment maintenance and on-site diagnosis and other scenarios.

Product reviews
Ultrasonic flow meter measurement
5
Susanb
Avatar
6/30/2021 11:36 PM
We are looking to measure tile drainage outflow velocity. Pipe size varies from 4 to 24 inches with water levels ranging from 0.25 to 4 inches. Would this product be able to measure this low amount of water?
Was this review helpful? Yes No (0/0)
ATO Responded
SKU: ATO-FLOW-2000H >>> Portable Clamp-On Ultrasonic Flow Meter for Water
See specs, price, and you can order online by credit card on: https://www.ato.com/ultrasonic-flow-meter
Unfortunately, this flow meter can only measure water flow when the pipe is full.
Love it.
5
Owen
Avatar
4/15/2022 2:21 AM
Works great on copper tubes/ pipes. Product is fairly easy to setup. Seems to give stable and accurate readings. Very acurate once properly set up.
Was this review helpful? Yes No (0/0)
Easy to monitor
5
Visonelet
Avatar
11/16/2022 11:12 PM
This little ultrasonic flow meter makes it so easy to monitor how much water I am putting in my RV tanks. I mainly use it for filling my black tank for a good flush. I will order more.
Was this review helpful? Yes No (0/0)
A commercial offer for the flow meter
5
candice
Avatar
8/20/2023 8:51 PM
Good morning, | ask you to provide a commercial offer for the supply of:
Portable ultrasonic liquid flow meter with the following specifications:
- Measurement method - consignment note ultrasonic.
- Number of measurement channels -2
- Charger - 230 VAC current (output and ground - Standard for Europe)
Was this review helpful? Yes No (0/0)
ATO Responded
We recommend Portable Clamp-On Ultrasonic Flow Meter.
This flow meter meets your needs. Please choose the combination of medium probe + large probe.
But this flowmeter is a single-channel ultrasonic flowmeter, which can only measure one channel at a time.
Regarding the number of transducers:
4
Bethel
Avatar
7/17/2026 12:38 AM
When ordering this flow meter, are the listed transducers a pair? Does each transducer come with its own cable, or does the entire flow meter set only include one pair of cables?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the transducers listed for this flow meter (SKU: ATO-FLOW-2100H) are supplied in pairs. Each transducer (upstream and downstream) comes with its own cable, and the flow meter also includes a power adapter.
Only registered users can write reviews