EMC Output Filter for VFD, 6A/20A/80A/150A/300A to 1000A

$116.76
Good quality EMC output filter for sale, designed for VFD load side to reduce the common-mode noise, protect the load and extend service life, 3-phase VFD output filter with rated voltage 250/440VAC 50/60Hz, current rating from 6 Amps to 1000 Amps, threaded stud or quick connect, high performance yet favorable price.
SKU: ATO-EMC-730T
*
Free Shipping
Delivery date: 8-12 days

3-phase EMC output filters are used to suppress the interference of the VFD output side to the load. It is greatly hulpful to solve the problems of load heating, howling, etc. that are easily generated during long-distance transmission of the variable frequency device. It works better with the reactor. With current rating from 6A, 15A, 30A, 50A, 80A to 1000A, the VFD output filter works at AC 250/440V 50/60Hz to effectively restrain the common-mode interference on the load transmission lines so as to protect the load and extend the load's service life.

Applications: The EMC output filters are suitable for variable frequency drives, servomotors, frequency converters and and other industrial equipment that require long-distance transmission.

Specification

1. Technical Data

ModelATO-MT730T
Rate Voltage250/440V AC
Operating Frequency50/60Hz
Phase3 Phase
Rated Current @40℃6A-1000A
Climatic Category25/085/21 (-25℃ to +85℃)
Test Voltage2250V DC 3S (P - P); 2700V DC 3S (P - E)

2. Selection Table

ModelRated Current @40℃VFD Power (kVA)DimensionConnectionWeight (kg)
Threaded StudQuick Connect
ATO-MT730T-66A1.5Fig.1M4—1.2
ATO-MT730T-1010A3.0Fig.1M4—1.2
ATO-MT730T-1515A5.5Fig.1M4—1.3
ATO-MT730T-2020A7.5Fig.1M4—1.7
ATO-MT730T-2525A11.0Fig.2M6—1.8
ATO-MT730T-3030A15.0Fig.2M6—1.8
ATO-MT730T-4040A18.5Fig.2M6—1.8
ATO-MT730T-5050A22.0Fig.3M6—3.2
ATO-MT730T-6060A30.0Fig.3M6—3.2
ATO-MT730T-8080A37.0Fig.3M8—3.5
ATO-MT730T-100100A45.0Fig.3M8—3.5
ATO-MT730T-120120A55.0Fig.3M8—6.5
ATO-MT730T-150150A75.0Fig.4M10—6.7
ATO-MT730T-200200A95.0Fig.4M10—11
ATO-MT730T-300300A110/132Fig.6—O14
ATO-MT730T-400400A160Fig.6—O14
ATO-MT730T-500500A200Fig.6—O21
ATO-MT730T-630630A315Fig.6—O21
ATO-MT730T-800800A375Fig.6—O21
ATO-MT730T-10001000A450Fig.6—O21

Dimensions (Unit: mm)

6A-30A EMC Input Line Filter Dimension

40A-200A EMC Input Line Filter Dimensions

300A-1000A EMC Input Line Filter Dimensions

Tips: Working principle of EMC filter for VFD

The interference signal has two modes: differential mode and common mode, so the filter for VFD should have attenuation for both types of interference. There are three basic principles:
1. Take advantage of the characteristics of capacitor - high frequency passing and low frequency isolating, to direct the high-frequency interference currents of the live and neutral lines to the ground (common mode), or direct the high-frequency interference currents of the live line to the neutral (differential mode).
2. Use the impedance characteristics of the inductor to reflect the high-frequency interference current back to the interference source.
3. The interference suppression ferrite can be used to absorb the interference signal of a certain frequency band and convert it into heat. Therefore, for the frequency band of a certain interference signal, the appropriate interference suppression ferrite magnetic ring or magnetic beads can be selected and directly placed on the cable that needs filtering.

Product reviews
Filter Composition
5
Jurgis
Avatar
9/2/2025 8:42 PM
Does the ATO-EMC-730T consist of an LC sine-wave filter and a common-mode choke for pure sine-wave filtering?
Was this review helpful? Yes No (0/0)
ATO Responded
The ATO-EMC-730T is a power supply filter, not a pure sine-wave filter.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

3-phase EMC output filters are used to suppress the interference of the VFD output side to the load. It is greatly hulpful to solve the problems of load heating, howling, etc. that are easily generated during long-distance transmission of the variable frequency device. It works better with the reactor. With current rating from 6A, 15A, 30A, 50A, 80A to 1000A, the VFD output filter works at AC 250/440V 50/60Hz to effectively restrain the common-mode interference on the load transmission lines so as to protect the load and extend the load's service life.

Applications: The EMC output filters are suitable for variable frequency drives, servomotors, frequency converters and and other industrial equipment that require long-distance transmission.

Specification

1. Technical Data

ModelATO-MT730T
Rate Voltage250/440V AC
Operating Frequency50/60Hz
Phase3 Phase
Rated Current @40℃6A-1000A
Climatic Category25/085/21 (-25℃ to +85℃)
Test Voltage2250V DC 3S (P - P); 2700V DC 3S (P - E)

2. Selection Table

ModelRated Current @40℃VFD Power (kVA)DimensionConnectionWeight (kg)
Threaded StudQuick Connect
ATO-MT730T-66A1.5Fig.1M4—1.2
ATO-MT730T-1010A3.0Fig.1M4—1.2
ATO-MT730T-1515A5.5Fig.1M4—1.3
ATO-MT730T-2020A7.5Fig.1M4—1.7
ATO-MT730T-2525A11.0Fig.2M6—1.8
ATO-MT730T-3030A15.0Fig.2M6—1.8
ATO-MT730T-4040A18.5Fig.2M6—1.8
ATO-MT730T-5050A22.0Fig.3M6—3.2
ATO-MT730T-6060A30.0Fig.3M6—3.2
ATO-MT730T-8080A37.0Fig.3M8—3.5
ATO-MT730T-100100A45.0Fig.3M8—3.5
ATO-MT730T-120120A55.0Fig.3M8—6.5
ATO-MT730T-150150A75.0Fig.4M10—6.7
ATO-MT730T-200200A95.0Fig.4M10—11
ATO-MT730T-300300A110/132Fig.6—O14
ATO-MT730T-400400A160Fig.6—O14
ATO-MT730T-500500A200Fig.6—O21
ATO-MT730T-630630A315Fig.6—O21
ATO-MT730T-800800A375Fig.6—O21
ATO-MT730T-10001000A450Fig.6—O21

Dimensions (Unit: mm)

6A-30A EMC Input Line Filter Dimension

40A-200A EMC Input Line Filter Dimensions

300A-1000A EMC Input Line Filter Dimensions

Tips: Working principle of EMC filter for VFD

The interference signal has two modes: differential mode and common mode, so the filter for VFD should have attenuation for both types of interference. There are three basic principles:
1. Take advantage of the characteristics of capacitor - high frequency passing and low frequency isolating, to direct the high-frequency interference currents of the live and neutral lines to the ground (common mode), or direct the high-frequency interference currents of the live line to the neutral (differential mode).
2. Use the impedance characteristics of the inductor to reflect the high-frequency interference current back to the interference source.
3. The interference suppression ferrite can be used to absorb the interference signal of a certain frequency band and convert it into heat. Therefore, for the frequency band of a certain interference signal, the appropriate interference suppression ferrite magnetic ring or magnetic beads can be selected and directly placed on the cable that needs filtering.

Product reviews
Filter Composition
5
Jurgis
Avatar
9/2/2025 8:42 PM
Does the ATO-EMC-730T consist of an LC sine-wave filter and a common-mode choke for pure sine-wave filtering?
Was this review helpful? Yes No (0/0)
ATO Responded
The ATO-EMC-730T is a power supply filter, not a pure sine-wave filter.
Only registered users can write reviews
Customers who bought this item also bought

EMC Input Filter for VFD, 10A/30A/50A/120A/200A to 1000A

ATO-EMC-730
$121.62
High-performance EMC input line filter has excellent interference suppression capability to the input side of VFD at 3-phase 3-wire AC 250/440V 50/60Hz, available rated current 6A/ 10A/ 30A/ 50A/ 120A/ 200A to 1000A, low leakage current, threaded stud or quick connect, high quality and low price.

EMI Power Line Filter 10A, 3 phase

ATO-EMI-1010
$89.92
EMI power line filter, 3-phase 3-wire, single stage, rated current 10A, operating frequency 50/60Hz and voltage rating to 250V/440V AC, connected with threaded stud, excellenct attenuation performance and favorable price.

10A 3-phase EMI Line Filter, 2 Stage

ATO-EMI-2010
$117.92
10A 2-stage EMI line filter, 3-phase 3-wire or 3-phase 4-wire, rated voltage 250/440V AC 50/60Hz, excellent performance of EMI suppression in the industrial equipment, compact size, stud connection, low price and high reliability.

Digital Timer Relay, 8 Pin, 12V/24V/220V

ATO-TIMER-TH200
$78.85
Digital timer relay with 3-digit LED display, on-delay timer, time setting range 0.01~999 second/minute/hour, supply voltages 12V DC, 24V DC or 220V AC. 8-pin timer relay with optional 8-pin mounting socket for DIN Rail, easy to install, high accuracy and wide time delay range.