EMC Input Filter for VFD, 10A/30A/50A/120A/200A to 1000A

$121.62
High-performance EMC input line filter has excellent interference suppression capability to the input side of VFD at 3-phase 3-wire AC 250/440V 50/60Hz, available rated current 6A/ 10A/ 30A/ 50A/ 120A/ 200A to 1000A, low leakage current, threaded stud or quick connect, high quality and low price.
SKU: ATO-EMC-730
*
Free Shipping
Delivery date: 8-12 days

ATO-MT730 series 3-phase 3-wire EMC filters are designed for suppressing the interference of VFD input end to the power grid and other digital equipment. With a three-stage filter design, they works at 250/440V AC 50/60Hz, current rating from 6 Amp, 10 Amp, 20 Amp, 25 Amp, 40 Amp to 1000 Amp with high impedance characteristics over a wide range of frequency and excellent common mode and differential mode suppression capability.

Applications: The EMC input line filters are widely used in variable frequency drives, servomotors, frequency converters and other industrial electronic equipment which work on the principle of frequency conversion as well as the work site with strict environmental requirements.

Specification

1. Technical Data

ModelATO-MT730
Rate Voltage250/440V AC
Operating Frequency50/60Hz
Phase3 Phase
Rated Current @40℃6A-1000A
Climatic Category25/085/21 (-25℃ to +85℃)
Test Voltage2250V DC 3S (P - P); 2700V DC 3S (P - E)

2. Selection Table

ModelRated Current @40℃Leakage Current (250VAC/50Hz @20℃)VFD Power (kVA)DimensionConnectionWeight (kg)
Threaded StudQuick Connect
ATO-MT730-66A<7.5mA1.5Fig.1M4—1.45
ATO-MT730-1010A<7.5mA3.0Fig.1M4—1.45
ATO-MT730-1515A<7.5mA5.5Fig.1M4—1.5
ATO-MT730-2020A<7.5mA7.5Fig.1M4—1.5
ATO-MT730-2525A<7.5mA11.0Fig.2M6—3.1
ATO-MT730-3030A<7.5mA15.0Fig.2M6—3.1
ATO-MT730-4040A<13.0mA18.5Fig.3M6—3.3
ATO-MT730-5050A<13.0mA22.0Fig.3M6—3.6
ATO-MT730-6060A<13.0mA30.0Fig.3M6—3.6
ATO-MT730-8080A<40.0mA37.0Fig.4M8—6.6
ATO-MT730-100100A<40.0mA45.0Fig.4M8—6.63
ATO-MT730-120120A<40.0mA55.0Fig.4M8—6.65
ATO-MT730-150150A<50.0mA75.0Fig.4M10—6.95
ATO-MT730-200200A<50.0mA95.0Fig.4M10—11
ATO-MT730-300300A<45.0mA110/132Fig.5—O14
ATO-MT730-400400A<45.0mA160Fig.5—O14
ATO-MT730-500500A<60.0mA200Fig.6—O18
ATO-MT730-630630A<60.0mA315Fig.6—O18
ATO-MT730-800800A<90.0mA375Fig.6—O21.7
ATO-MT730-10001000A<90.0mA450Fig.6—O21.7

Dimensions (Unit: mm)

6A-30A EMC Input Line Filter Dimension

40A-200A EMC Input Line Filter Dimensions

300A-1000A EMC Input Line Filter Dimensions

Typical Circuit Diagram

VFD input filter typical circuit diagram

Insertion Loss in dB

* Straight line refers to common mode; dotted line refers to differential mode.

VFD Input Filter Insertion Loss in dB 6A-50A

VFD Input Filter Insertion Loss in dB 60A-400A

VFD Input Filter Insertion Loss in dB 500A-1000A

Tips: What is an EMC filter for variable frequency drive (VFD)?

The special filter for variable frequency drive is a filter specially designed to eliminate the frequency spectrum components that interfere with the power grid and other digital electronic equipment and enhance the electromagnetic compatibility (EMC) of the VFD when it is working. The EMC filter for VFD is composed of a low-pass filter circuit made up of an inductor and a capacitor, which allows the current of the useful signal to pass, and has a larger attenuation for the interference signal with a higher frequency.

The filters for variable frequency drive can be divided into VFD input filters and VFD output filters based on their use positions.
1. Characteristics of VFD input filters

  • A wide range of attenuation characteristics;
  • Small leakage current.

2. Characteristics of VFD output filters

  • dv / dt suppression, over-voltage limitation;
  • Reduce the electromagnetic interference of the VFD;
  • Reduce the loss of VFD and motor coil.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

ATO-MT730 series 3-phase 3-wire EMC filters are designed for suppressing the interference of VFD input end to the power grid and other digital equipment. With a three-stage filter design, they works at 250/440V AC 50/60Hz, current rating from 6 Amp, 10 Amp, 20 Amp, 25 Amp, 40 Amp to 1000 Amp with high impedance characteristics over a wide range of frequency and excellent common mode and differential mode suppression capability.

Applications: The EMC input line filters are widely used in variable frequency drives, servomotors, frequency converters and other industrial electronic equipment which work on the principle of frequency conversion as well as the work site with strict environmental requirements.

Specification

1. Technical Data

ModelATO-MT730
Rate Voltage250/440V AC
Operating Frequency50/60Hz
Phase3 Phase
Rated Current @40℃6A-1000A
Climatic Category25/085/21 (-25℃ to +85℃)
Test Voltage2250V DC 3S (P - P); 2700V DC 3S (P - E)

2. Selection Table

ModelRated Current @40℃Leakage Current (250VAC/50Hz @20℃)VFD Power (kVA)DimensionConnectionWeight (kg)
Threaded StudQuick Connect
ATO-MT730-66A<7.5mA1.5Fig.1M4—1.45
ATO-MT730-1010A<7.5mA3.0Fig.1M4—1.45
ATO-MT730-1515A<7.5mA5.5Fig.1M4—1.5
ATO-MT730-2020A<7.5mA7.5Fig.1M4—1.5
ATO-MT730-2525A<7.5mA11.0Fig.2M6—3.1
ATO-MT730-3030A<7.5mA15.0Fig.2M6—3.1
ATO-MT730-4040A<13.0mA18.5Fig.3M6—3.3
ATO-MT730-5050A<13.0mA22.0Fig.3M6—3.6
ATO-MT730-6060A<13.0mA30.0Fig.3M6—3.6
ATO-MT730-8080A<40.0mA37.0Fig.4M8—6.6
ATO-MT730-100100A<40.0mA45.0Fig.4M8—6.63
ATO-MT730-120120A<40.0mA55.0Fig.4M8—6.65
ATO-MT730-150150A<50.0mA75.0Fig.4M10—6.95
ATO-MT730-200200A<50.0mA95.0Fig.4M10—11
ATO-MT730-300300A<45.0mA110/132Fig.5—O14
ATO-MT730-400400A<45.0mA160Fig.5—O14
ATO-MT730-500500A<60.0mA200Fig.6—O18
ATO-MT730-630630A<60.0mA315Fig.6—O18
ATO-MT730-800800A<90.0mA375Fig.6—O21.7
ATO-MT730-10001000A<90.0mA450Fig.6—O21.7

Dimensions (Unit: mm)

6A-30A EMC Input Line Filter Dimension

40A-200A EMC Input Line Filter Dimensions

300A-1000A EMC Input Line Filter Dimensions

Typical Circuit Diagram

VFD input filter typical circuit diagram

Insertion Loss in dB

* Straight line refers to common mode; dotted line refers to differential mode.

VFD Input Filter Insertion Loss in dB 6A-50A

VFD Input Filter Insertion Loss in dB 60A-400A

VFD Input Filter Insertion Loss in dB 500A-1000A

Tips: What is an EMC filter for variable frequency drive (VFD)?

The special filter for variable frequency drive is a filter specially designed to eliminate the frequency spectrum components that interfere with the power grid and other digital electronic equipment and enhance the electromagnetic compatibility (EMC) of the VFD when it is working. The EMC filter for VFD is composed of a low-pass filter circuit made up of an inductor and a capacitor, which allows the current of the useful signal to pass, and has a larger attenuation for the interference signal with a higher frequency.

The filters for variable frequency drive can be divided into VFD input filters and VFD output filters based on their use positions.
1. Characteristics of VFD input filters

  • A wide range of attenuation characteristics;
  • Small leakage current.

2. Characteristics of VFD output filters

  • dv / dt suppression, over-voltage limitation;
  • Reduce the electromagnetic interference of the VFD;
  • Reduce the loss of VFD and motor coil.
Only registered users can write reviews
Customers who bought this item also bought

EMC Output Filter for VFD, 6A/20A/80A/150A/300A to 1000A

ATO-EMC-730T
$116.76
Good quality EMC output filter for sale, designed for VFD load side to reduce the common-mode noise, protect the load and extend service life, 3-phase VFD output filter with rated voltage 250/440VAC 50/60Hz, current rating from 6 Amps to 1000 Amps, threaded stud or quick connect, high performance yet favorable price.

Surge Protection Device, Type 2, 20/40/60/80kA

ATO-SPD-2080
$62.63
Low price surge protection device (SPD), Type 2 or Class II test level, selectable in nominal discharge current 10kA / 20kA / 30kA / 40kA with max. discharge current of 20kA / 40kA / 60kA / 80kA accordingly, 1 Pole/2 Pole/3 Pole/4 Pole SPD for options, DIN rail mounting, easy installation, compact size, good performance and best surge protector for your power supply system with rated voltage of 400V AC 50Hz/60Hz.