Lower price USB to RS485 adapter with VCC, DATA-, DATA+, GND, FG USB signal, T/R+, T/R-, GND RS-485 signal, twisted-pair or shielded cable transmission media.
Specification
| Model | ATO-UT-890A |
| USB signal | VCC, DATA-, DATA+, GND, FG |
| RS-485 signal | T/R+, T/R-, GND |
| RS-422 signal | T/R+, T/R-, RXD+, RXD-, GND |
| Length | 0.5m/ 1.5m/ 3m |
| Working mode | Asynchronous, point to point or point to multi-point, 2 wires half-duplex or 4 wires full-duplex |
| Direction control | Adopts traffic direction auto-control technology |
| Baud rate | 300-921.6Kbps auto-detect serial signal |
| Load capacity | Supports point to multi-point communication, allows to connect 32 sets RS-422 or RS-485 device |
| Transmission distance | 1200m(9600bps) for RS-485/422, no more than 5m for USB |
| Port protection | Surge, ±15KV ESD protection |
| Connector | USB-A male, DB9 male |
| Signal indication | LEDs for indicating PWR TXD, and RXD activity |
| Transmission media | Twisted-pair or shielded cable |
| Operating temperature | -40℃ to 85℃ |
| Transmission distance | 0-1200m |
| Relative humidity | 5% to 95% |
| Supports | Win2000/2003/2008/2012/XP/Vista/7/8/8.1/10/CE/Mac/Linux |
| Outer size (L*W*H) | 1555mm*36mm*16mm |
| Weight | 1kg |
| Certificate | RoHS, CE, FC |
| Warranty | 12 months |
Dimension (mm)

Tips: The Feature of USB to RS485 Converter.
1. SMT process, small volume embedded module.
2. Provide 16-bit or 8-bit data bus.
3. High-speed USB2.0 interface read and write speed is greater than 35MB/sec.
4. Provide drivers for all Windows versions.
5. Provide various high-level language programming source codes.
6. Provide a large number of single-chip control example source code.
7. Provide FPGA control VHDL programming code.
Product reviews
Definitely recommend everyone to buy
Zeile
9/30/2021 12:14 AM
I have bought three USB to RS485 converters and will buy more when I needed. Easy enough to use and works well. I like it very much and I definitely recommend you to buy it.
Was this review helpful? (0/0)
Works perfectly!
Alfredo
5/5/2022 2:53 AM
I've been using this USB to RS485 converter for a few hours on Linux and it works perfectly without any problems. Good product and good value. I plan on purchasing one or two more to keep as backup units.
Was this review helpful? (0/0)
Seamless Data Connectivity
Saiban
9/8/2023 2:13 AM
The "Seamless Data Connectivity" USB to RS485 Converter has exceeded my expectations in every regard. Its plug-and-play functionality makes setup a breeze - I simply plugged it into my USB port, and it was ready to use. This ease of installation saved me valuable time.
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
Digital Load Cell Amplifier, Output 4-20mA/0-10V/RS485
ATO-LCTR-OAR
$109.85
High precision load cell amplifier has a 6 digit LED display, output signal 4-20mA/ 0-5V/ 0-10V/ RS485. There are 3 keys for parameter settings. Digital load cell amplifier can be calibrated on-line by its 3 keys. The setting parameters include zero, capacity, communication rate, division value, decimal digits, etc.
Reaction Torque Sensor, Dual Flange, 20 Nm/100 Nm/5000 Nm to 10000 Nm
ATO-TQS-S01
$193.92
Torque sensor is a strain gauge sensor for static torque measurement. Static torque sensor has double-flange, a 5 pin male plug and no mounting base so it can be easy to install. Reaction torque sensors have a capacity range from 20 Nm/300 Nm/2000 Nm to 10000 Nm and can measure both forward and reverse torque.
Reaction Torque Sensor, Flange to Square Drive, 2/10/30/50/100/200 Nm
ATO-TQS-S03
$134.92
Torque sensor is a strain gauge sensor for static torque measurement or torque wrench calibration. It can measure both forward and reverse torque. Static torque sensor has one end of flange and the other end of square drive. Reaction torque sensors have a capacity range of 2/10/30/50/100/200 Nm.
DC-DC Buck Converter, 12V/24V to 3.3V/5V/6V
ATO-DCDC-122405
$98.45
This series of DC-DC power converters are DC-DC buck converters with wide input range of 8V to 36V, high conversion efficiency up to 95%, is designed to step down the input rated voltage 12V/24V DC to 3.3V, 5V or 6V output voltage, and different models are available for selection.
DC-DC Buck Converter, 48V to 24V
ATO-DCDC-4824
$72.14
Affordable price 48V DC to 24V DC buck converter series for sales, step down voltage of 48 volt to 24 volt, with different models from 3 amps to 63 amps, 72 watts to 1500 watts, 35V-60V input voltage range, high efficiency up to 98%, IP68 for body.