USB to RS485 Converter, 2 Port

$140.48
2 port USB to RS485 converter with 300bps-115.2Kbps baud rate, 5000m (9600bps) transmission distance, rated power 9-30VDC/ 350mA, DB9 female to 10-pin terminal block connector. It is generally used in mechanical control systems, access control systems, industrial automation, industrial control, security monitoring, equipment debugging, upgrades, etc.
SKU: ATO-UT-502
Free Shipping
Delivery date: 6-12 days

Cost-effective two port USB to RS485 adapter cable with asynchronous half-duplex working mode, -40℃ to 85℃ operating temperature.

Specification

ModelATO-UT-502
StandardsRS-232, RS-485, RS-422 TIA/EIA
PortAutomatic traffic direction control, no need external flow control signal (RTS), real TXD/RXD/GND communication
Baud rate300bps-115.2Kbps
ConnectorAllows connecting 128 sets RS-485 or RS-422 device
Transmission distance5000m (9600bps)
Power9-30VDC/350mA
Working modeasynchronous half-duplex (RS-485)
Isolation2.5KVrms/500VDC enhanced isolation, special DC/DC module
ProtectionRS-485/ 422 provides each wire with 600W lighting,surge & ±15KV ESD protection
ConnectorDB9 female to 10-pin terminal block
Transmission mediaTwisted-pair or shielded cable
Dimension (L*W*H)117mm*80mm*25mm
Operating temperature-40℃ to 85℃
Relative humidity5% to 95%

Dimension (mm)

Dimension of RS232 to 485 Converter 2 Port

Tips: The difference between RS232 and RS485 Converter.

The difference of the communication line of the interface:
RS232 generally uses three-core twisted pair, three-core shielded wire, etc.
RS485 uses two-core twisted pair, two-core shielded wire, etc. Ordinary twisted-pair cables can be used in low-speed, short-distance, and interference-free situations. On the contrary, in high-speed and long-term transmission, RS485 dedicated cables with impedance matching (usually 120Ω) must be used. Should use armored twisted-pair shielded cable.
Generally speaking, RS232 has not many advantages, and the transmission distance is only 15 meters, but it is very useful. For example, it may be used in monitoring, upgrades and debugging of other equipment, and the function is more hand-over with USB, so there is now a USB conversion port. , Not only to obtain a higher transmission speed, but also to solve the shortcomings that the USB interface cannot be transmitted over long distances.

Product reviews
Works perfect for ModBus
5
Charlotte
Avatar
11/23/2023 2:16 AM
This converter works fantastic for modbus troubleshooting. And the build quality is solid.
Was this review helpful? Yes No (0/0)
It runs very stably
4
Steven
Avatar
1/19/2026 6:14 PM
Long transmission distance works well, isolation feels reliable, and wiring was straightforward with the terminal block.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Cost-effective two port USB to RS485 adapter cable with asynchronous half-duplex working mode, -40℃ to 85℃ operating temperature.

Specification

ModelATO-UT-502
StandardsRS-232, RS-485, RS-422 TIA/EIA
PortAutomatic traffic direction control, no need external flow control signal (RTS), real TXD/RXD/GND communication
Baud rate300bps-115.2Kbps
ConnectorAllows connecting 128 sets RS-485 or RS-422 device
Transmission distance5000m (9600bps)
Power9-30VDC/350mA
Working modeasynchronous half-duplex (RS-485)
Isolation2.5KVrms/500VDC enhanced isolation, special DC/DC module
ProtectionRS-485/ 422 provides each wire with 600W lighting,surge & ±15KV ESD protection
ConnectorDB9 female to 10-pin terminal block
Transmission mediaTwisted-pair or shielded cable
Dimension (L*W*H)117mm*80mm*25mm
Operating temperature-40℃ to 85℃
Relative humidity5% to 95%

Dimension (mm)

Dimension of RS232 to 485 Converter 2 Port

Tips: The difference between RS232 and RS485 Converter.

The difference of the communication line of the interface:
RS232 generally uses three-core twisted pair, three-core shielded wire, etc.
RS485 uses two-core twisted pair, two-core shielded wire, etc. Ordinary twisted-pair cables can be used in low-speed, short-distance, and interference-free situations. On the contrary, in high-speed and long-term transmission, RS485 dedicated cables with impedance matching (usually 120Ω) must be used. Should use armored twisted-pair shielded cable.
Generally speaking, RS232 has not many advantages, and the transmission distance is only 15 meters, but it is very useful. For example, it may be used in monitoring, upgrades and debugging of other equipment, and the function is more hand-over with USB, so there is now a USB conversion port. , Not only to obtain a higher transmission speed, but also to solve the shortcomings that the USB interface cannot be transmitted over long distances.

Product reviews
Works perfect for ModBus
5
Charlotte
Avatar
11/23/2023 2:16 AM
This converter works fantastic for modbus troubleshooting. And the build quality is solid.
Was this review helpful? Yes No (0/0)
It runs very stably
4
Steven
Avatar
1/19/2026 6:14 PM
Long transmission distance works well, isolation feels reliable, and wiring was straightforward with the terminal block.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews