Tension Sensor for Wire Rope, Three Pulley, 2kg - 100kg

$212.99
Selling tension sensor for wire rope with three pulley. The tensile sensor can measure forces in the range of 0-100kg, with 5-15V operating voltage, 150% safe overload, 10KHz response frequency. The force sensor with built-in overload protection mechanism, high dynamic response frequency, suitable for all kinds of optical fibers, yarns, chemical fibers, metal wires, wires, cable wires, adhesive tapes, steel tapes tension measurement.
SKU: ATO-LC-ZL107
*
*
*
Free Shipping
Delivery date: 8-12 days

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, 4-20mA, or RS485.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

Wire rope tension sensor for sale, with a three-pulley setup. Handles 0-100kg force, operates on 5-15V, with 150% overload protection and 10KHz fast response. Designed for accurate tension measurement in fibers, yarns, metal wires, cables, tapes, and steel bands.

Specification

ModelATO-DYZL-107
Measuring Range0-100kg
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Output Sensitivity2.0±10% V/V
Zero Output±1% F.S.
Non-linearity0.1% F.S.
Hysteresis0.1% F.S.
Repeatability0.1% F.S.
Creep (30 min)0.1% F.S.
Temperature Sensitivity Drift0.05% F.S./10°C
Zero Temperature Drift0.05% F.S./10°C
Response Frequency10KHz
MaterialStainless steel / Alloy steel
Impedance350Ω
Insulation Resistance≥5000MΩ / 100VDC
Operating Voltage5-15V
Operating Temperature Range-20°C~80°C
Safe Overload150%
Ultimate Overload200%
Protection LevelIP64
Cable Specificationφ5×3m
Cable Maximum Tension10kg
TEDSOptional (Contact customer service)


Feature

Tension sensor for wire rope feature

  • High Precision, Stable Measurement: The force sensor has a built-in overload protection mechanism. Before leaving the factory, it undergoes rigorous testing to ensure measurement accuracy, stability, and reliability.
  • Stable Structure, Corrosion Resistance: Designed with a double-link hole structure, the tension sensor supports both tension and compression with good output symmetry. It is easy to install, lightweight, and adapts well to steel wire rope movement, providing effective force measurement.
  • Fixed End, Installation Application: The tension sensor is suitable for measuring the tension of various optical fibers, chemical fibers, silk threads, metal wires, electrical cables, rubber belts, and steel belts. Widely used in electronics, chemical industry, textiles, papermaking, and machinery fields.
  • Hexagonal Waterproof Connector: Equipped with a spring sheath to prevent wire breakage due to pulling, it is resistant to damage and corrosion, ensuring stable signal transmission and anti-interference performance.
  • 42CrMo Alloy Steel: Made from high-quality 42CrMo alloy steel with chamfered edges for smoothness, featuring a sandblasted exterior for a fine texture and long service life.

Dimension (unit: mm)

Tension sensor for wire rope size

Wiring Method

Load cell wiring method

Application

Tension sensor widely used in electronics, chemical industry, textile, papermaking, machinery and other fields, with higher measurement accuracy, reliability and stability in the field of tension measurement.

Tension sensor for wire rope application

Tips: What is the working principle of the tension sensor for wire rope?

The working principle of the tension sensor for wire rope is based on measuring the force exerted on the rope as it passes through the three pulleys. When the wire rope experiences tension, it applies force to the pulleys, causing a slight deformation in the sensor's internal strain gauges. This deformation generates a proportional electrical signal, which is then processed and converted into a tension value.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, 4-20mA, or RS485.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

Wire rope tension sensor for sale, with a three-pulley setup. Handles 0-100kg force, operates on 5-15V, with 150% overload protection and 10KHz fast response. Designed for accurate tension measurement in fibers, yarns, metal wires, cables, tapes, and steel bands.

Specification

ModelATO-DYZL-107
Measuring Range0-100kg
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Output Sensitivity2.0±10% V/V
Zero Output±1% F.S.
Non-linearity0.1% F.S.
Hysteresis0.1% F.S.
Repeatability0.1% F.S.
Creep (30 min)0.1% F.S.
Temperature Sensitivity Drift0.05% F.S./10°C
Zero Temperature Drift0.05% F.S./10°C
Response Frequency10KHz
MaterialStainless steel / Alloy steel
Impedance350Ω
Insulation Resistance≥5000MΩ / 100VDC
Operating Voltage5-15V
Operating Temperature Range-20°C~80°C
Safe Overload150%
Ultimate Overload200%
Protection LevelIP64
Cable Specificationφ5×3m
Cable Maximum Tension10kg
TEDSOptional (Contact customer service)


Feature

Tension sensor for wire rope feature

  • High Precision, Stable Measurement: The force sensor has a built-in overload protection mechanism. Before leaving the factory, it undergoes rigorous testing to ensure measurement accuracy, stability, and reliability.
  • Stable Structure, Corrosion Resistance: Designed with a double-link hole structure, the tension sensor supports both tension and compression with good output symmetry. It is easy to install, lightweight, and adapts well to steel wire rope movement, providing effective force measurement.
  • Fixed End, Installation Application: The tension sensor is suitable for measuring the tension of various optical fibers, chemical fibers, silk threads, metal wires, electrical cables, rubber belts, and steel belts. Widely used in electronics, chemical industry, textiles, papermaking, and machinery fields.
  • Hexagonal Waterproof Connector: Equipped with a spring sheath to prevent wire breakage due to pulling, it is resistant to damage and corrosion, ensuring stable signal transmission and anti-interference performance.
  • 42CrMo Alloy Steel: Made from high-quality 42CrMo alloy steel with chamfered edges for smoothness, featuring a sandblasted exterior for a fine texture and long service life.

Dimension (unit: mm)

Tension sensor for wire rope size

Wiring Method

Load cell wiring method

Application

Tension sensor widely used in electronics, chemical industry, textile, papermaking, machinery and other fields, with higher measurement accuracy, reliability and stability in the field of tension measurement.

Tension sensor for wire rope application

Tips: What is the working principle of the tension sensor for wire rope?

The working principle of the tension sensor for wire rope is based on measuring the force exerted on the rope as it passes through the three pulleys. When the wire rope experiences tension, it applies force to the pulleys, causing a slight deformation in the sensor's internal strain gauges. This deformation generates a proportional electrical signal, which is then processed and converted into a tension value.

Only registered users can write reviews
Customers who bought this item also bought

Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

ATO-LCTR-OA
$81.27
Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.

Digital Load Cell Amplifier, Output 4-20mA/0-10V/RS485

ATO-LCTR-OAR
$109.85
High precision load cell amplifier has a 6 digit LED display, output signal 4-20mA/ 0-5V/ 0-10V/ RS485. There are 3 keys for parameter settings. Digital load cell amplifier can be calibrated on-line by its 3 keys. The setting parameters include zero, capacity, communication rate, division value, decimal digits, etc.

6 Digit Display Controller for Load Cells

ATO-DPM-DY800
$327.09
6 digit display controller can be used with load cells, force sensors and weighing sensors, 4-20mA or 0-10V transmitting signal output. This digital panel meter can display gross, net, peak and valley value alternately. Software with RS485 communication cable allows you to log the data on a PC.

Hall Effect Angle Sensor, Contactless, RS485/4-20mA/0-5V

ATO-AS-GTC
$132.52
Low price hall angle sensor is for sale at ATO. The contactless magnetic angle sensor supports three output signals: RS485/4-20mA/0-5V, with a measurement range of 0-360° and a measurement temperature range of -30℃ to +80℃. The independent linear accuracy is 0.15% FS, and the protection grade is IP65.