RTD temperature sensor can directly provide accurate input signal of temperature changes for display instruments, recording instruments, signal conditioners, scanister and computer.
Specification
1. RTD temperature range and accuracy chart
| Type of sensing element | Measuring range | Allowable deviation Δt |
| Pt100 | -200~420℃ | Class B (-200~800℃) Permissible deviation ±(0.30+0.005|t|) |
| Class A (-200~650℃) Permissible deviation ±(0.15+0.002|t|) | ||
| Cu50 | -100~150℃ | -50~100℃ Permissible deviation ±(0.30+6.0*10-3t) |
Note: t is the actual measuring temperature absolute value of the temperature sensing element.
2. Transmitter parameter chart
| Input | Platinum thermistor: PT100, PT1000 |
| Output | 4-20mA |
| Intrinsic error | ±0.2%, ±0.5% |
| Transmission mode | Two wire |
| Supply voltage | DC 12~35V, rated voltage DC 24V |
| Load resistance | 0~600Ω (DC 24V), rated load 250Ω |
| Temperature influence | ≤0.05/1℃ |
| Working environment | Temperature: -25~+80℃, humidity: 5%~95%, mechanical vibration: f≤55Hz, amplitude<0.15mm |
| Display | 3 1/2digital display or LCD display, temperature unit is degree centigrade (℃). |
Feature
- Wide Range of Applications: Digital temperature sensor with transmitter can directly measure the temperature of liquid, steam and gas medium in the range of -200~+420°℃ in various industrial processes, and convert the temperature into a 4-20mA unified output signal proportional to the electrical signal of the thermal resistor. It can be widely used in metallurgy, petroleum, chemical industry, electricity, light industry, textile, food and other fields.
- Anti-interference: The transmitter component of the digital RTD sensor is miniaturized and can be installed in the junction box of the thermal resistor to become an integrated temperature transmitter. As an integrated temperature transmitter, it directly outputs 4~20mA signals in the industrial field, which improves the anti-interference ability of the signal during long-distance transmission.
- Corrosion Resistance: RTD sensor with digital meter has high accuracy, low power consumption, wide operating environment temperature range, and stable and reliable operation. Moreover, due to the use of silicone rubber sealing structure, it is shock-resistant and moisture-resistant, and is suitable for use in harsh field environments.
- Easy to Use: It can directly display the real-time temperature on site with high precision, and directly observe the temperature change of the measured medium. At the same time, it can output a standard 4-20mA current signal to the display instrument in the control room or the DCS system to display the temperature.
Dimension (Unit: mm)

Selection
| Type of sensing element | Meter type | Installing form | Mode of connection | Thermowell diameter | Thermowell total length |
| T4: Pt100; T6: Pt1000 | P0: No meter; P2: Meter with digital display (unit: ℃); P4: Intelligent meter with digital display (unit: ℃) | I1: No fixed device; I2: Fixed card sets of thread joint (thread M27*2mm); I3: Movable card sets of thread joint (thread M27*2mm); I4: Fixed card sets of flange (flang DN 15mm); I6: Taper thermowell and fixing thread (thread M27*2mm) | C3: Standard waterproof protection head; C4: Explosion-proof protection head | D0: Φ16mm (when thermowell insertion depth≥300mm); D1: Φ12mm (when thermowell insertion depth<300mm) | 225~2150mm |
Note: The sensing element is sheath RTD sensor, thermowell material is stainless steel, and circuit adopts non-isolated type. When ordering products, write the thermowell insertion depth l and the corresponding temperature range for output 4~20mA signal you need.
Application

Tips: Troubleshooting of Pt100 RTD sensor
- Fault: Instrument shows negative value.
Possible cause: Wrong connection between display instrument and Pt100 RTD sensor, or short circuit of Pt100 RTD sensor.
Processing method: Correct the connection, find out short circuit position and strengthen insulation. - Fault: Instrument shows that the indicated value of Pt100 RTD sensor is lower than the actual value or the indicating value is unstable.
Possible cause: There are metal chips, dust, dirt among wiring terminal and Pt100 RTD sensor short circuit.
Processing method: Remove metal chips, clean dust and water drops, find out short circuit position and strengthen insulation. - Fault: Instrument displays infinity.
Possible reasons: Pt100 RTD sensor or lead wire short circuit, or connection terminal loosening, etc.
Processing method: Change the resistance body, or welding and tighten the thread screw. - Fault: Relation between Pt100 RTD sensor resistance value and temperature has changed.
Possible cause: Resistance wire of Pt100 RTD sensor become corrosive and degenerative.
Processing method: Replace resistance wire of Pt100 RTD sensor.
Product reviews
Good 2-wire digital temperature sensor
Rural
3/2/2021 6:24 PM
Before shipping, can you send me some photos of this Pt100 digital temperature sensor?
Was this review helpful? (0/0)
Can the digital temperature sensor be customized?
Michelle
4/22/2021 1:11 AM
I'm looking a PT 100, class B, RTD sensor probe with protection head, about 60 inches long shealth, fixing thread, but wtihout thermowell, just sensor probe with head. Can you customize based on our specs?
Was this review helpful? (0/0)
Product requirements
Candace
6/9/2026 8:35 PM
We are designing a glove box and require an integrated K-type thermocouple and transmitter assembly, to be mounted inside a secondary protective glove box via a KF flange.
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
Temp and Humidity Sensor/Transmitter, Duct/Wall Mounted, 0-10V
ATO-TAHT-FG6010
$69.83
Temperature and humidity transmitter adopts a digital temperature and humidity sensor, and converts air temperature and humidity into 0-10V standard signal. Industrial temperature and humidity transmitter has explosion-proof aluminum alloy housing, metal filter screen, wide measuring range, high measurement accuracy in high-low temperature and humidity, fast response, excellent long-term stability and anti-chemical pollution.
Water to Air Brazed Plate Heat Exchanger, 50/60 Plate
ATO-PHE-5060
$341.85
Brazed plate heat exchanger price is competitive. Maximum quantity of plates is 50 or 60 for different models, heat exchange capacity is 14kBTU/17kBTU/6.8k~34kBTU respectively. The product is non-standard, plate specific quantity can be customized. Applicable mediums include water to water, air to air, water to air, oil to water, etc.
Accurate Temperature Humidity Sensor, Stainless Steels Duct
ATO-TAHS-300ATH
$175.88
Accurate temperature and humidity sensors at low cost, with stainless steel duct construction, designed for high accuracy measurement, support RS485, 4-20mA, 0-5V and 0-10V output signals, and measurement temperature can be upgraded from -40°C to 120°C, providing stable and durable temperature and humidity monitoring solutions.