Rigid Coupling, 16 x 24mm

$99.85
Rigid coupling diameter 16mm, 24mm length, rated torque 5 N.m, speed of 9400rpm, moment of inertia 2.9 X 10-7 N.m, rigid clamping couplings are widely used in automation equipment, lasers (marking, engraving, welding, cutting), non-standard automation, dispensing machines, screw machines, etc.
SKU: ATO-SC-GNC-1624
*
*
Free Shipping
Delivery date: 6-12 days

16mm x 24mm rigid shaft coupler rated torque 5 N.m, 4mm to 8mm, high-strength aluminum alloy material makes the coupling resistant to corrosion and oxidation, long service life time, 12 months warranty.

Specification

ModelATO-SC-GNC-1624
Rated Torque5 Nm
Allowable Speed9400rpm
Moment of inertia2.9 X 10-7
d1/d2 Inner Diameter Size3-4-5-6-6.35-7-8
Φd16
L24
F3.75
Moment of inertiaM2.5
Tightening Torque1 N.m
Weight13g
CertificateISO9001, REACH, RoHS
Warranty12 Months

16 x 24mm Rigid Coupling Dimension (unit: mm)
Rigid coupling dimension

Tips: The difference between flexible coupling and rigid coupling

1. Different characteristics
Flexible couplings are couplings that can compensate for the axial and radial displacements between the connecting shafts, while rigid couplings are couplings that cannot connect the axial and radial displacements between the shafts.
2. Different structure
Compared with the flexible coupling, the rigid coupling has a relatively simple structure, while the flexible coupling has a relatively complex structure. It is more suitable for the situation where the concentricity of the two shafts is not good, and it is especially suitable for the situation with torsional vibration. The elastic structure has the effect of damping vibration. Rigid couplings are relatively suitable for situations where the concentricity of the two shafts is good, and the price is relatively cheap.
3. Different assembly requirements
The shaft concentricity error of the two shafts of the rigid coupling needs to be within 0.05mm, and a more accurate coaxiality error value is required, while the flexible coupling for the coaxiality error of the two shafts can be within 0.1mm, and it is required at the same time. The distance between the drive shaft and the pump end must be 5~10mm.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Fits well with no problems
5
Slade
Avatar
4/14/2022 2:48 AM
I use it as a coupler and it works great! Tolerances are tight enough that the two shafts are perfectly aligned without any wobble or offset at the low rpm they are used for.
Was this review helpful? Yes No (0/0)
Durable rigid coupling
5
Barlit
Avatar
12/2/2024 12:05 AM
I have been using this rigid coupling for a while and it has shown no signs of overheating, wear or damage. It is very durable. It works very well on my motor drive and has not slipped or failed.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

16mm x 24mm rigid shaft coupler rated torque 5 N.m, 4mm to 8mm, high-strength aluminum alloy material makes the coupling resistant to corrosion and oxidation, long service life time, 12 months warranty.

Specification

ModelATO-SC-GNC-1624
Rated Torque5 Nm
Allowable Speed9400rpm
Moment of inertia2.9 X 10-7
d1/d2 Inner Diameter Size3-4-5-6-6.35-7-8
Φd16
L24
F3.75
Moment of inertiaM2.5
Tightening Torque1 N.m
Weight13g
CertificateISO9001, REACH, RoHS
Warranty12 Months

16 x 24mm Rigid Coupling Dimension (unit: mm)
Rigid coupling dimension

Tips: The difference between flexible coupling and rigid coupling

1. Different characteristics
Flexible couplings are couplings that can compensate for the axial and radial displacements between the connecting shafts, while rigid couplings are couplings that cannot connect the axial and radial displacements between the shafts.
2. Different structure
Compared with the flexible coupling, the rigid coupling has a relatively simple structure, while the flexible coupling has a relatively complex structure. It is more suitable for the situation where the concentricity of the two shafts is not good, and it is especially suitable for the situation with torsional vibration. The elastic structure has the effect of damping vibration. Rigid couplings are relatively suitable for situations where the concentricity of the two shafts is good, and the price is relatively cheap.
3. Different assembly requirements
The shaft concentricity error of the two shafts of the rigid coupling needs to be within 0.05mm, and a more accurate coaxiality error value is required, while the flexible coupling for the coaxiality error of the two shafts can be within 0.1mm, and it is required at the same time. The distance between the drive shaft and the pump end must be 5~10mm.

Product reviews
Fits well with no problems
5
Slade
Avatar
4/14/2022 2:48 AM
I use it as a coupler and it works great! Tolerances are tight enough that the two shafts are perfectly aligned without any wobble or offset at the low rpm they are used for.
Was this review helpful? Yes No (0/0)
Durable rigid coupling
5
Barlit
Avatar
12/2/2024 12:05 AM
I have been using this rigid coupling for a while and it has shown no signs of overheating, wear or damage. It is very durable. It works very well on my motor drive and has not slipped or failed.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews