Rigid Coupling, 20 x 30mm

$109.86
Rigid clamping couping adopts high-strength aluminum alloy as a whole, which has strong corrosion and oxidation resistance, rated torque 10 Nm, speed of 7500rpm. Diameter 20mm, length 30mm, 5mm to 10mm, clamping screw tightening method.
SKU: ATO-SC-GNC-2030
*
*
Free Shipping
Delivery date: 6-12 days

Rigid shaft coupling 5 mm to 10mm bore, 20mm diameter and 30mm length, high axial load and torque capacity, maintenance-free, with super oil and corrosion resistance characteristics.

Specification

ModelATO-SC-GNC-2030
Rated Torque10 Nm
Allowable Speed7500rpm
Moment of inertia8.6 X 10-6
d1/d2 Inner Diameter Size4-5-6-6.35-7-8-9-9.525-10
Φd20
L30
F3.75
Moment of inertiaM2.5
Tightening Torque1 N.m
Weight25g
CertificateISO9001, REACH, RoHS
Warranty12 Months

20 x 30mm Rigid Coupling Dimension (unit: mm)
Rigid coupling dimension

Tips: Coupling requirements for keyed shafts

1. Use flat key type
2. The buyer can specify the number and layout of the keyway
3. For high-speed couplings, the type, size, tolerance, material and heat treatment of the flat key elastic sleeve pin coupling.
4. The cross-sectional size requirements for the keyway of the flat key of the high-speed coupling.
5. For the coupling hub of the key connection, there should be a puller screw hole at the end with a minimum of M8.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Rigid shaft coupling 5 mm to 10mm bore, 20mm diameter and 30mm length, high axial load and torque capacity, maintenance-free, with super oil and corrosion resistance characteristics.

Specification

ModelATO-SC-GNC-2030
Rated Torque10 Nm
Allowable Speed7500rpm
Moment of inertia8.6 X 10-6
d1/d2 Inner Diameter Size4-5-6-6.35-7-8-9-9.525-10
Φd20
L30
F3.75
Moment of inertiaM2.5
Tightening Torque1 N.m
Weight25g
CertificateISO9001, REACH, RoHS
Warranty12 Months

20 x 30mm Rigid Coupling Dimension (unit: mm)
Rigid coupling dimension

Tips: Coupling requirements for keyed shafts

1. Use flat key type
2. The buyer can specify the number and layout of the keyway
3. For high-speed couplings, the type, size, tolerance, material and heat treatment of the flat key elastic sleeve pin coupling.
4. The cross-sectional size requirements for the keyway of the flat key of the high-speed coupling.
5. For the coupling hub of the key connection, there should be a puller screw hole at the end with a minimum of M8.

Only registered users can write reviews