Rigid Coupling, 25 x 36mm

$109.86
Light weight rigid coupling speed of 6000rpm, clamp type, 12Nm rated torque,diameter 25mm, length 36mm, load smoothly, reliable force transmission, easy to install and disassemble. Rigid shaft coupling has the advantages of maintenance-free, super oil and corrosion resistance.
SKU: ATO-SC-GNC-2536
*
*
Free Shipping
Delivery date: 6-12 days

Rigid clamp coupling has the superior performance of light weight, ultra-low inertia and high sensitivity, diameter 1 inch x length 1.4 inch, bore 6mm to 12mm, rigid coupling is made of aluminum alloy material, which has a long service life.

Specification

ModelATO-SC-GNC-2536
Rated Torque12 Nm
Allowable Speed6000rpm
Moment of inertia2.7 X 10-6
d1/d2 Inner Diameter Size5-6-6.35-7-8-9-9.525-10-12
Φd25
L36
F6
Moment of inertiaM3
Tightening Torque1.5 N.m
Weight43g
CertificateISO9001, REACH, RoHS
Warranty12 Months

25 x 36mm Rigid Coupling Dimension (unit: mm)
Rigid coupling dimension

Tips: How to fix the shaft coupling?

1. Set screw fixation. The two set screws have a gap of 90º to lock the fixed shaft. In the traditional fixing method, because the front end of the screw contacts the shaft, it may cause damage to the shaft or difficulty in disassembly.

2. Clamping screw fixation. Use the tightening force of the hexagon socket bolt to shrink the slit and clamp the shaft tightly. This method is convenient to fix and disassemble, and it will not cause damage to the shaft. It is a very common fixing method.

3. Keyway type fixation. Suitable for high-torque transmission. In order to prevent axial sliding, it is usually used together with set screw fixation and clamping screw fixation.

4. D-shaped hole fixing. Usually, if the shaft of the motor is D-shaped, if the positioning screw cannot be fixed, the hole of the coupling can be processed into a D-shaped hole corresponding to the size of the motor shaft, and the positioning is coordinated The screws are fixed, so there is no need to worry about slipping.

5. Expansion sleeve fixation. Tighten and fix the account cover by tightening the four positioning screws on the end of the coupling. It is suitable for the connection and fixation of some stepping motors and servo motors with large torque, such as expansion sleeve diaphragm couplings, expanding sleeve plum blossom coupling, expanding sleeve bellows coupling, etc.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Perfect rigid coupling for my project
5
Phoeni
Avatar
4/14/2022 2:55 AM
Set screws and precision machining ensure that the rigid coupling can hold the shaft fully and tightly, the stainless steel material ensures that the coupling is not corroded, I am very happy to buy it, it is suitable for my project.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Rigid clamp coupling has the superior performance of light weight, ultra-low inertia and high sensitivity, diameter 1 inch x length 1.4 inch, bore 6mm to 12mm, rigid coupling is made of aluminum alloy material, which has a long service life.

Specification

ModelATO-SC-GNC-2536
Rated Torque12 Nm
Allowable Speed6000rpm
Moment of inertia2.7 X 10-6
d1/d2 Inner Diameter Size5-6-6.35-7-8-9-9.525-10-12
Φd25
L36
F6
Moment of inertiaM3
Tightening Torque1.5 N.m
Weight43g
CertificateISO9001, REACH, RoHS
Warranty12 Months

25 x 36mm Rigid Coupling Dimension (unit: mm)
Rigid coupling dimension

Tips: How to fix the shaft coupling?

1. Set screw fixation. The two set screws have a gap of 90º to lock the fixed shaft. In the traditional fixing method, because the front end of the screw contacts the shaft, it may cause damage to the shaft or difficulty in disassembly.

2. Clamping screw fixation. Use the tightening force of the hexagon socket bolt to shrink the slit and clamp the shaft tightly. This method is convenient to fix and disassemble, and it will not cause damage to the shaft. It is a very common fixing method.

3. Keyway type fixation. Suitable for high-torque transmission. In order to prevent axial sliding, it is usually used together with set screw fixation and clamping screw fixation.

4. D-shaped hole fixing. Usually, if the shaft of the motor is D-shaped, if the positioning screw cannot be fixed, the hole of the coupling can be processed into a D-shaped hole corresponding to the size of the motor shaft, and the positioning is coordinated The screws are fixed, so there is no need to worry about slipping.

5. Expansion sleeve fixation. Tighten and fix the account cover by tightening the four positioning screws on the end of the coupling. It is suitable for the connection and fixation of some stepping motors and servo motors with large torque, such as expansion sleeve diaphragm couplings, expanding sleeve plum blossom coupling, expanding sleeve bellows coupling, etc.

Product reviews
Perfect rigid coupling for my project
5
Phoeni
Avatar
4/14/2022 2:55 AM
Set screws and precision machining ensure that the rigid coupling can hold the shaft fully and tightly, the stainless steel material ensures that the coupling is not corroded, I am very happy to buy it, it is suitable for my project.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews