Rigid Coupling, 16 x 16mm

$99.85
Rigid shaft coupling diameter 16mm, length 16mm, 4mm to 8mm, ratd torque 5 N.m, low inertia and high sensitivity, shaft coupler is made of high-strength aluminum alloy with strong corrosion resistance.
SKU: ATO-SC-GNC-1616
*
*
Free Shipping
Delivery date: 6-12 days

4mm to 8mm rigid coupling made of high-strength aluminum alloy, clamping screw tightening method, 16mm length, 16mm width, rigid couplings basically do not allow eccentricity, and must be fully eccentrically adjusted during use.

Specification

ModelATO-SC-GNC-1616
Rated Torque5 Nm
Allowable Speed9400rpm
Moment of inertia2.9 X 10-7
d1/d2 Inner Diameter Size3-4-5-6-6.35-7-8
Φd16
L16
F3.75
Moment of inertiaM2.5
Tightening Torque1 N.m
Weight7g
CertificateISO9001, REACH, RoHS
Warranty12 Months

Rigid Clamp Coupling Dimension (unit: mm)
Rigid coupling dimension

Tips: Types Of Shaft Coupling

1. Rigid coupling
Rigid couplings are divided into sleeve couplings and flange couplings.

2. Flexible coupling
Flexible coupling without elastic elements: disc pin coupling, cross slide coupling, single universal joint coupling, double universal joint coupling, gear coupling, chain coupling. Flexible couplings with elastic elements are elastic couplings: flexible couplings with metal elastic elements and flexible couplings with non-metallic elastic elements. Among them, flexible couplings with non-metallic elastic elements are divided into elastic sleeve pins Couplings, elastic pin couplings, tire couplings, elastic disc couplings.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
This is exactly what i need
5
Elliot
Avatar
4/14/2022 2:40 AM
Exactly what I need for the project I'm building, to be able to fit snugly, basically with zero backlash, with tight enough tolerances that the two axes line up perfectly without any wobble or offset at the low rpm they use. I am very satisfied with the purchase!
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

4mm to 8mm rigid coupling made of high-strength aluminum alloy, clamping screw tightening method, 16mm length, 16mm width, rigid couplings basically do not allow eccentricity, and must be fully eccentrically adjusted during use.

Specification

ModelATO-SC-GNC-1616
Rated Torque5 Nm
Allowable Speed9400rpm
Moment of inertia2.9 X 10-7
d1/d2 Inner Diameter Size3-4-5-6-6.35-7-8
Φd16
L16
F3.75
Moment of inertiaM2.5
Tightening Torque1 N.m
Weight7g
CertificateISO9001, REACH, RoHS
Warranty12 Months

Rigid Clamp Coupling Dimension (unit: mm)
Rigid coupling dimension

Tips: Types Of Shaft Coupling

1. Rigid coupling
Rigid couplings are divided into sleeve couplings and flange couplings.

2. Flexible coupling
Flexible coupling without elastic elements: disc pin coupling, cross slide coupling, single universal joint coupling, double universal joint coupling, gear coupling, chain coupling. Flexible couplings with elastic elements are elastic couplings: flexible couplings with metal elastic elements and flexible couplings with non-metallic elastic elements. Among them, flexible couplings with non-metallic elastic elements are divided into elastic sleeve pins Couplings, elastic pin couplings, tire couplings, elastic disc couplings.

Product reviews
This is exactly what i need
5
Elliot
Avatar
4/14/2022 2:40 AM
Exactly what I need for the project I'm building, to be able to fit snugly, basically with zero backlash, with tight enough tolerances that the two axes line up perfectly without any wobble or offset at the low rpm they use. I am very satisfied with the purchase!
Was this review helpful? Yes No (0/0)
Only registered users can write reviews