Micro Rotary Torque Sensor for Dynamic Torque Measurement, 0.1-5 Nm

$914.02
Rotary torque sensor is a strain gauge sensor for dynamic micro torque measurement. It has two shafts, a 5 pin male plug and no mounting base. Micro torque sensors have a capacity range from 0.1 Nm/0.2 Nm/0.3 Nm/0.5 Nm/1 Nm/3 Nm to 5 Nm. Rotary torque transducer can measure both forward and reverse torque.
SKU: ATO-TQS-D02
*
*
*
Free Shipping
Delivery date: 8-12 days

Rotary torque sensors have capacity range from 0.1 Nm, 0.2 Nm, 0.3 Nm, 0.5 Nm, 1 Nm, 2 Nm, 3 Nm to 5 Nm. Torque sensor capacity can be customized according to customer requirements.

After purchasing one ATO rotary torque sensor, you can buy a special digital panel meter to output standard signal to PLC, DCS and other systems. Customized output signal is 4-20mA, 0-10V, -5V~+5V, RS485 and RS232.

Specification

ModelATO-DYN-205
Shipping Weight1.5kg
Capacity Range *0-1 Nm ~ 0-5 Nm
Output Signal *DC 0-20mV, or equip display controller ATO-DPM-DY056 for output signal DC 4-20mA, 0-10V, -5V~+5V, RS485, RS232
Sensitivity1.0-1.5mV/V
Zero Balance±2%FS
Non-linearity0.1%FS
Hysteresis0.03%FS
Repeatability0.03%FS
Creep0.03%FS/30min
Temperature Drift on Zero<0.1%F.S/10℃
Temperature Effect on Output<0.03%F.S/10℃
Operating Temperature-10℃~+60℃
Humidity0~90%RH
Impedance350Ω
Insulation Resistance≥2000MΩ/100VDC
Stability0.3%FS/year
Safety Overload150%F.S
Ultimate Overload200%F.S
Excitation VoltageDC 5-15V
Speed Range0-3000rpm
MaterialStainless steel
Protection ClassIP65
Electrical Connection5 pin circular connector
Cable Length3m (Φ5mm)
WiringEXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


Mirco Rotary Torque Sensor Dimension (unit: mm)

Micro rotary torque sensor 0.1-5 Nm dimension

Details

Micro Rotary Torque Sensor for Dynamic Torque Measurement Details

Mirco Rotary Torque Sensor Installation

Micro rotary torque sensor 0.1-5 Nm installation

Force Diagram

Micro rotary torque sensor 0.1-5 Nm force diagram

Applications

Micro rotary torque sensor 0.1-5 Nm application

Tips: What is a micro rotary torque sensor and how does it work?

The micro rotary torque sensor is a high-precision sensor for measuring the torque of rotating parts. It monitors the torsional moment of a shaft in real time through strain gauge or magnetic measurement technology and converts the data into an electrical output.

These sensors are commonly used in precision manufacturing, automotive testing, and robot joint control to ensure efficient operation of power systems.

The following key factors should be considered when selecting the right torque sensor:

  1. Range: Ensure that the sensor can cover the torque range required for your application.
  2. Accuracy and Resolution: The higher the accuracy, the more reliable the measurements will be for demanding test environments.
  3. Mounting Methods: Different models of transducers are suitable for different mounting needs, such as shaft type, flange type, etc.
  4. Data Ouput Mode: Support analog signal, digital signal or wireless transmission to meet the compatibility requirements of different systems.
Product reviews
Torque reading of torque sensor
5
Amy
Avatar
7/11/2021 9:08 PM
Hi, I have a question regarding the torque sensor. Will there be any changes on torque reading if I apply axial force (tension or compression) on the torque sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, if you apply an axial force (tension or pressure) on the torque sensor, the torque reading will change.
More information about the 0.1-5Nm torque sensor
5
Blik
Avatar
8/9/2021 2:25 AM
Hello, I'm Andrea Negri from IMT (Italy). We are interested in your product ATO-TQS-D02. Is it possible to have a user manual or more information about it? We are looking for an analogue 5V or something like this. For example, the D03 can have RS485 and  -5V. It is perfect for us, but the dimensions are not compliant to our requirements. The D02 dimensions are ok and it fits well with our system.
Was this review helpful? Yes No (0/0)
ATO Responded
This sensor output torque signal is 0-20mv by default, so note what follows:
1. If you want to get an output analogue signal of 5V, then you have to use this amplifier >>> SKU: ATO-LCTR-OAR
See spec, price and you can order online by credit card at: https://www.ato.com/digital-load-cell-amplifier-output-4-20ma-0-10v-rs485
2. If you want to get an output analogue signal of ±5V, then you have to use this transmitter >>> SKU: ATO-LCTR-OA
See spec, price and you can order online by credit card at: https://www.ato.com/load-cell-transmitter-output-0-5v-4-20ma
Manual
5
Gerardo
Avatar
10/29/2021 1:40 PM
Good afternoon sir: The college I teach,bought this sensor.However I am very disappointed, that no manual is included. Can you sent me a manual,please?
Was this review helpful? Yes No (0/0)
ATO Responded
You can send an email to our technical staff.
We believe that SKU ATO-TQS-D02 with 0.5 N*m capacity and 0.1% FS accuracy specification is a good starting point.
5
Levy
Avatar
5/27/2022 1:06 AM
Please confirm (1) the final system total accuracy (linearity   repeatability   hysteresis in  /-% of FSO), (2) the procedure for compensating the  /-2% FSO zero balance (must be adjusted at each start-up?), and (3) whether we can send back to ATO for yearly calibration.

Thank you for your help in this matter
Was this review helpful? Yes No (0/0)
ATO Responded
Dear Levy,

1. The overall accuracy of the system is 0.1%FS, and the accuracy of the torque sensor and instrument cannot be adjusted.
2. Yes, calibration includes paper calibration report. There will be 5 groups of data verification of forward and reverse torque, forward and backward torque in the report.
3. After the sensor is installed, it is necessary to adjust the overall coaxiality of the device. And after each test, check whether the reset to zero meets the requirements.
4. Calibration services can still be provided after one year, but an additional charge of 82USD is required, and you need to bear the round-trip shipping cost To China.
I'm considering purchasing a torque transducer
5
Levis
Avatar
11/27/2023 8:35 PM
I'm considering purchasing a torque transducer.  Would like to know if the software for data acquisition comes with this?   (Enabled by the RS485 option?)  Let me know, thanks.
Was this review helpful? Yes No (0/0)
ATO Responded
If you select this option: Output Signal * RS485, it means that the output signal of the torque sensor is converted to RS485, but the data acquisition software is Not included.  If you want to collect and record the torque sensor values on the computer, we recommend using another amplifier ATO-DPM-DY800.
Superior Micro Rotary Torque Sensor
4
Papma
Avatar
5/8/2024 4:06 AM
This is the latest miniature rotary torque sensor purchased by our laboratory. I am looking forward to our upcoming experiments in torque measurement applications, but there is still one issue to consider. Is the 0.1 Nm ranged sensor sufficient to measure torque when our expected torque values range from approximately 0.0008 Nm up to about 0.005 Nm?
Was this review helpful? Yes No (1/0)
ATO Responded
This Micro Rotary Torque Sensor ATO-TQS-D02, measuring range 0.1Nm, the minimum range can measure about 0.005 Nm, but can Not measure 0.0008 Nm.
More About Information
5
Dandi
Avatar
4/26/2026 8:06 PM
Hello sir, I'm planning to buy this sensor. Does it include the cable? And what if I want to output it via RS485 to read the torque to the PLC? What else do I need to buy? Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
It comes with a plug and leads, allowing you to connect it to a PLC using the built-in RS485 interface.
Resistance
5
Solz
Avatar
7/13/2026 12:24 AM
Before installing the sensor, I could feel significant resistance simply by turning it by hand. This resistance seemed to be much greater than the sensor's inherent sensitivity.
Was this review helpful? Yes No (0/0)
ATO Responded
The ATO-TQS-D02 torque sensor has internal slip rings, like a car brake disc, which is why you experience considerable resistance when you turn it by hand.
Friction in the torque sensor
5
Arro
Avatar
10/28/2026 1:12 AM
I still have concerns about the friction of the DYN-205 torque sensor.
Was this review helpful? Yes No (0/0)
ATO Responded
The DYN-205 sensor is a contact type with internal mechanical contact, so friction is normal.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Rotary torque sensors have capacity range from 0.1 Nm, 0.2 Nm, 0.3 Nm, 0.5 Nm, 1 Nm, 2 Nm, 3 Nm to 5 Nm. Torque sensor capacity can be customized according to customer requirements.

After purchasing one ATO rotary torque sensor, you can buy a special digital panel meter to output standard signal to PLC, DCS and other systems. Customized output signal is 4-20mA, 0-10V, -5V~+5V, RS485 and RS232.

Specification

ModelATO-DYN-205
Shipping Weight1.5kg
Capacity Range *0-1 Nm ~ 0-5 Nm
Output Signal *DC 0-20mV, or equip display controller ATO-DPM-DY056 for output signal DC 4-20mA, 0-10V, -5V~+5V, RS485, RS232
Sensitivity1.0-1.5mV/V
Zero Balance±2%FS
Non-linearity0.1%FS
Hysteresis0.03%FS
Repeatability0.03%FS
Creep0.03%FS/30min
Temperature Drift on Zero<0.1%F.S/10℃
Temperature Effect on Output<0.03%F.S/10℃
Operating Temperature-10℃~+60℃
Humidity0~90%RH
Impedance350Ω
Insulation Resistance≥2000MΩ/100VDC
Stability0.3%FS/year
Safety Overload150%F.S
Ultimate Overload200%F.S
Excitation VoltageDC 5-15V
Speed Range0-3000rpm
MaterialStainless steel
Protection ClassIP65
Electrical Connection5 pin circular connector
Cable Length3m (Φ5mm)
WiringEXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


Mirco Rotary Torque Sensor Dimension (unit: mm)

Micro rotary torque sensor 0.1-5 Nm dimension

Details

Micro Rotary Torque Sensor for Dynamic Torque Measurement Details

Mirco Rotary Torque Sensor Installation

Micro rotary torque sensor 0.1-5 Nm installation

Force Diagram

Micro rotary torque sensor 0.1-5 Nm force diagram

Applications

Micro rotary torque sensor 0.1-5 Nm application

Tips: What is a micro rotary torque sensor and how does it work?

The micro rotary torque sensor is a high-precision sensor for measuring the torque of rotating parts. It monitors the torsional moment of a shaft in real time through strain gauge or magnetic measurement technology and converts the data into an electrical output.

These sensors are commonly used in precision manufacturing, automotive testing, and robot joint control to ensure efficient operation of power systems.

The following key factors should be considered when selecting the right torque sensor:

  1. Range: Ensure that the sensor can cover the torque range required for your application.
  2. Accuracy and Resolution: The higher the accuracy, the more reliable the measurements will be for demanding test environments.
  3. Mounting Methods: Different models of transducers are suitable for different mounting needs, such as shaft type, flange type, etc.
  4. Data Ouput Mode: Support analog signal, digital signal or wireless transmission to meet the compatibility requirements of different systems.
Product reviews
Torque reading of torque sensor
5
Amy
Avatar
7/11/2021 9:08 PM
Hi, I have a question regarding the torque sensor. Will there be any changes on torque reading if I apply axial force (tension or compression) on the torque sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, if you apply an axial force (tension or pressure) on the torque sensor, the torque reading will change.
More information about the 0.1-5Nm torque sensor
5
Blik
Avatar
8/9/2021 2:25 AM
Hello, I'm Andrea Negri from IMT (Italy). We are interested in your product ATO-TQS-D02. Is it possible to have a user manual or more information about it? We are looking for an analogue 5V or something like this. For example, the D03 can have RS485 and  -5V. It is perfect for us, but the dimensions are not compliant to our requirements. The D02 dimensions are ok and it fits well with our system.
Was this review helpful? Yes No (0/0)
ATO Responded
This sensor output torque signal is 0-20mv by default, so note what follows:
1. If you want to get an output analogue signal of 5V, then you have to use this amplifier >>> SKU: ATO-LCTR-OAR
See spec, price and you can order online by credit card at: https://www.ato.com/digital-load-cell-amplifier-output-4-20ma-0-10v-rs485
2. If you want to get an output analogue signal of ±5V, then you have to use this transmitter >>> SKU: ATO-LCTR-OA
See spec, price and you can order online by credit card at: https://www.ato.com/load-cell-transmitter-output-0-5v-4-20ma
Manual
5
Gerardo
Avatar
10/29/2021 1:40 PM
Good afternoon sir: The college I teach,bought this sensor.However I am very disappointed, that no manual is included. Can you sent me a manual,please?
Was this review helpful? Yes No (0/0)
ATO Responded
You can send an email to our technical staff.
We believe that SKU ATO-TQS-D02 with 0.5 N*m capacity and 0.1% FS accuracy specification is a good starting point.
5
Levy
Avatar
5/27/2022 1:06 AM
Please confirm (1) the final system total accuracy (linearity   repeatability   hysteresis in  /-% of FSO), (2) the procedure for compensating the  /-2% FSO zero balance (must be adjusted at each start-up?), and (3) whether we can send back to ATO for yearly calibration.

Thank you for your help in this matter
Was this review helpful? Yes No (0/0)
ATO Responded
Dear Levy,

1. The overall accuracy of the system is 0.1%FS, and the accuracy of the torque sensor and instrument cannot be adjusted.
2. Yes, calibration includes paper calibration report. There will be 5 groups of data verification of forward and reverse torque, forward and backward torque in the report.
3. After the sensor is installed, it is necessary to adjust the overall coaxiality of the device. And after each test, check whether the reset to zero meets the requirements.
4. Calibration services can still be provided after one year, but an additional charge of 82USD is required, and you need to bear the round-trip shipping cost To China.
I'm considering purchasing a torque transducer
5
Levis
Avatar
11/27/2023 8:35 PM
I'm considering purchasing a torque transducer.  Would like to know if the software for data acquisition comes with this?   (Enabled by the RS485 option?)  Let me know, thanks.
Was this review helpful? Yes No (0/0)
ATO Responded
If you select this option: Output Signal * RS485, it means that the output signal of the torque sensor is converted to RS485, but the data acquisition software is Not included.  If you want to collect and record the torque sensor values on the computer, we recommend using another amplifier ATO-DPM-DY800.
Superior Micro Rotary Torque Sensor
4
Papma
Avatar
5/8/2024 4:06 AM
This is the latest miniature rotary torque sensor purchased by our laboratory. I am looking forward to our upcoming experiments in torque measurement applications, but there is still one issue to consider. Is the 0.1 Nm ranged sensor sufficient to measure torque when our expected torque values range from approximately 0.0008 Nm up to about 0.005 Nm?
Was this review helpful? Yes No (1/0)
ATO Responded
This Micro Rotary Torque Sensor ATO-TQS-D02, measuring range 0.1Nm, the minimum range can measure about 0.005 Nm, but can Not measure 0.0008 Nm.
More About Information
5
Dandi
Avatar
4/26/2026 8:06 PM
Hello sir, I'm planning to buy this sensor. Does it include the cable? And what if I want to output it via RS485 to read the torque to the PLC? What else do I need to buy? Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
It comes with a plug and leads, allowing you to connect it to a PLC using the built-in RS485 interface.
Resistance
5
Solz
Avatar
7/13/2026 12:24 AM
Before installing the sensor, I could feel significant resistance simply by turning it by hand. This resistance seemed to be much greater than the sensor's inherent sensitivity.
Was this review helpful? Yes No (0/0)
ATO Responded
The ATO-TQS-D02 torque sensor has internal slip rings, like a car brake disc, which is why you experience considerable resistance when you turn it by hand.
Friction in the torque sensor
5
Arro
Avatar
10/28/2026 1:12 AM
I still have concerns about the friction of the DYN-205 torque sensor.
Was this review helpful? Yes No (0/0)
ATO Responded
The DYN-205 sensor is a contact type with internal mechanical contact, so friction is normal.
Only registered users can write reviews
Customers who bought this item also bought

Digital Load Cell Amplifier, Output 4-20mA/0-10V/RS485

ATO-LCTR-OAR
$109.85
High precision load cell amplifier has a 6 digit LED display, output signal 4-20mA/ 0-5V/ 0-10V/ RS485. There are 3 keys for parameter settings. Digital load cell amplifier can be calibrated on-line by its 3 keys. The setting parameters include zero, capacity, communication rate, division value, decimal digits, etc.

Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

ATO-LCTR-OA
$81.27
Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.

Digital Pressure Transducer 5 PSI/30 PSI/100 PSI/3000 PSI/8000 PSI

ATO-PRES-PX400
$197.78
Digital pressure transducer offers measuring ranges from -0.1 to 60 MPa, 0.5% FS accuracy, and optional 4–20mA or RS485 output. It supports gauge, absolute and sealed pressure measurement for air, water and oil applications.

Micro Reaction Torque Sensor for Static Torque, 0.5-150 Nm

ATO-TQS-S04
$175.93
Micro torque sensor is a reaction torque sensor for static torque measurement. Torque sensor is made of aluminium alloy, 150%FS safety overload, -20°C~+80°C operating temperature, low price. Reaction torque transducers have a capacity range from 0.5 Nm ~ 150 Nm and can measure both forward and reverse torque.

Display Controller for Torque Sensor, RS485 Interface

ATO-DPM-D056
$185.29
ATO display controller with RS485 interface for sale, this transmitter is specially designed for torque sensor, optional transmit output of 4-20mA, 0-10V, -5V~+5V, and RS232 interface, analog input signal range from -15mV to 15 mV, working at 12~30V DC supply voltage.