PTFE pH electrode can be used in harsh environment, such as strong acid and strong alkali.
Function:
- Special for strong acid and alkali, good corrosion resistance.
- Low impedance glass sensitive film.
- More accurate and stable measurement data.
- High-quality low-noise cable, can achieve 60m long distance signal transmission.
Specification:
| Model | ATO-PHETE-PH5013A |
| Weight | 1kg |
| Dimension | Length: 158mm, diameter: 25.4mm |
| Measuring range | 0-14pH |
| Accuracy | 0.02pH |
| Temperature range | 0-60℃ (32-140℉) |
| Temperature compensation * | Internal temperature sensor (NTC 10K) |
| Zero position | 7±0.3pH |
| Compressive strength | 0.6MPa |
| Response time | 15s |
| Installation size | 3/4NPT in both ends |
| Shell material | PTFE |
| Connection | Direct lead |
| Cable length * | 5m/10m/15m, or other length less than 50m (need customization) |
| Service life | 6 months |
The pH electrod installation methods:
1. Side wall installation (*The pH electrode must be at an angle of 15 degrees to the liquid surface. Otherwise, it will affect the normal use of the pH electrode.)
2. Flange mounted at the top
3. Pipe installation
4. Top installation
5. Submersible installation
6. Flow-through installation
Tips: PTFE electrode dosing system
- The electrode should be installed in the bypass beside the main pipe, and a valve should be installed at its front end to control the flow velocity. The flow shall be as small as possible, generally, as long as the outlet has a stable aqueous solution drops. Electrodes should be installed vertically and go deep into active water, and the water outlet should be higher than the water inlet to ensure that the electrode is completely immersed in the solution.
- The electrode should be calibrated before installation.
- As the measurement signal is a weak electrical signal, its acquisition cable should be independent and avoided to be connected in a same cable connector or terminal with the power line and control line, so as to avoid interference or breakdown of measuring units.
- When measuring cables need to be lengthened, please choose to customize the length or contact customer service (more than 15m).
Product reviews
PTFE pH electrode can be used in harsh environments
Scruz
7/30/2021 12:22 AM
This PTFE electrode is perfect for sewage treatment. Using it in a harsh environment such as strong acid and strong alkali. The measurement result is stable, fast and accurate. It is a very good PTFE pH electrode.
Was this review helpful? (0/0)
Good PH probe at low price!
Zxenith
5/24/2022 3:28 AM
The PTFE electrodes worked beautifully and the price was right! These things are so fragile and I was so worried it would be expensive to replace. Fortunately, they are inexpensive and available. Recommend this seller!
Was this review helpful? (0/0)
I have been using the ATO pH electrodes
Haley
11/21/2022 11:45 PM
I put the pH electrode in the pool and so far, so good. It has been in use for about 2.5 months and it is still working well, exceeding my life expectancy. I have been buying ATO electrodes for the past year.
Was this review helpful? (0/0)
Good and cheap for me
Frederick
12/7/2022 12:45 AM
So far so good. I have had this pH electrode for about 1.5 months and it is still working good, which exceeded my expected life expectancy for it. Highly recommended!!!
Was this review helpful? (0/0)
Lasted so long
Carrie
1/16/2023 8:14 PM
Not sure why this pH electrode has lasted so long. My pH device says its still fully functional after 6 months of ten-uses a day. Still holds less than 1% error slope.
Was this review helpful? (0/0)
Does the pH electrode connection have polarity?
shelly
8/30/2023 7:22 PM
The pH sensor is not sensing and there is no resistance between the two yellow (refer) and transparent (input) cables. Is this normal?
Does the sensor connection have polarity?
If so, what is the correct connection?
I have seen the manual but it does not indicate.
Does the sensor connection have polarity?
If so, what is the correct connection?
I have seen the manual but it does not indicate.
Was this review helpful? (0/0)
Accurate pH Electrode
Karl
5/27/2024 3:29 AM
Many different pH meters have been used in the laboratory, but their service life is relatively short. This also takes into account daily use. The pH meter may not last for a long time, and the pH value will deviate, so durability is also considered. I purchased this instrument and have been using it for a while. It can quickly read the pH value so that we can treat the experimental sewage and discharge it as soon as possible. Hope it can last longer.
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
Digital pH Meter, Online Test pH/ORP of Water/Food
ATO-PHM-PH8
$547.89
Digital pH/ORP meter can be used with various pH electrodes or ORP electrodes to realize online testing and monitoring of pH (-2~+16) / ORP (-1999~+1999mV) / temperature (-10~+130℃/14~266℉) of sewage, corrosive solution, liquid medicine, beer, drinking water, food, etc. Online pH meter can be connected to digital panel meter/VFD/PLC/recorder (4-20mA output), or connected to computer for remote monitoring and recording (RS485 communication). Digital pH detector can also be connected with alarm relays and solenoid valves to form a simple pH process control system.
pH Controller, Transmit pH/ORP, Water/Food Process
ATO-PHM-PH6
$327.62
pH/ORP controller can be connected with alarm relays and solenoid valves to form a simple pH/ORP process control system. Digital pH meter can be used with various pH electrodes or ORP electrodes to realize online continuous testing and monitoring of the pH (0~14) / ORP (-1000~1000mV) / temperature (-10~+130℃/14~266℉) of sewage, corrosive solution, liquid medicine, beer, drinking water, food, high temperature sterilization occasions, etc. pH controller transmits standard output signal 4-20mA to digital panel meter/VFD/PLC/recorder, or RS485 signal to computer for remote monitoring and recording.
Digital pH/ORP Meter for Water Testing
ATO-PHM-PH160
$298.28
Digital pH/ORP meter is a high quality online pH/ORP controller. The pH/ORP meter can be used in various severe environment. It is used to test and monitor the pH (0~14) / ORP (-1000~1000mV) / temperature (0~100℃/32~212℉) of sewage, corrosive solution, liquid medicine, beer, drinking water, food, etc. The pH detector transmits standard output signal 4-20mA to digital panel meter/VFD/PLC/recorder, or RS485 signal to a computer for remote monitoring and recording.
Industrial pH/ORP Meter for Water
ATO-PHM-163S
$271.78
Low price pH/ORP meter is specially designed for water testing and can detect and monitor pH (0~14pH) and ORP (-1000~1000mV) of sewage. Recommended industrial pH detector is equipped with an optional 5m sewage combination electrode/glass electrode/electroplating electrode/PTFE electrode/desulfurization electrode, which can be used in sewage treatment, dosing control, desulfurization chemical industry, printing and dyeing industry, waste gas treatment, and electroplating industry.