Pressure Transducer for Air/Water/Oil, Output 4-20mA/0-10V/RS485

$149.96
Pressure transducer offers selectable ranges from -0.1 to 60 MPa and supports current, voltage or RS485 signal output. The 2088-style housing is designed for air, water and oil pressure measurement at medium temperatures from -40°C to 60°C.
SKU: ATO-PRES-P400
*
*
*
*
*
Free Shipping
Delivery date: 8-12 days

Pressure transducer for air/water/oil pressure measurement has optional output signal, such as 4-20mA/0-20mA/0-5V/1-5V/0-10V/RS485.

Application: Pressure transducer is widely used in process control, chemical, petroleum and metallurgical industry and other fields.

Specification:

ModelATO-PRES-P400
Weight1.6kg
Measuring range *-0.1~60MPa (-1~600bar/-14~8702psi)
Pressure typeGauge pressure (standard)
Contact us for absolute pressure, sealed pressure type (note that the measuring range for these two types must ≤1MPa)
Measure mediumAir, water, oil
Power supply *DC 12V, DC 24V, DC 12-36V
Output signal *4-20mA, 0-20mA, 0-5V, 1-5V, 0-10V, RS485
Accuracy *±0.5%FS, ±0.3%FS, ±1%FS (when output signal is 0-5V or 0-10V)
Zero temperature drift±0.03%FS/℃
Sensitivity temperature drift±0.03%FS/℃
Long term stability≤0.2%FS/year
Overload pressure200%FS
Frequency response (-3dB)5kHz~650kHz
Thread of pressure connection *G1/4, G1/2, 1/4NPT, 1/2NPT, M14*1.5, M20*1.5
Response time<10ms
Operating temperature-40~+80℃ (-40~+176℉)
Medium temperature-40~+60℃ (-40~+140℉)
MaterialHousing: 304 stainless steel
Fill fluid: silicon oil
Pressure port: 304 stainless steel, or 316L stainless steel (customizable)
Separating diaphragm: 304 stainless steel, or 316L stainless steel (customizable)
Protection classIP67

Note: * denotes optional parameters, you can select every parameter in drop-down lists to finish your order.

Pressure transducer dimension drawing (unit: mm):
Pressure transducer dimensional drawing
Pressure transducer wiring diagram:
Pressure transducer wiring drawing
Tips: Why the pressure transducer output signal is smaller than 4mA?
When the differential pressure transducer and orifice plate cooperate to measure flow rate, blockage or severe leakage of high pressure connecting pipe in differential pressure transducer makes the pressure in negative pressure chamber higher than that of positive pressure chamber, the output current of pressure transducer is smaller than 4mA. The output of the differential pressure transducer can return normal through the drainage, dredging the connecting pies or sealing the leakage points. Reverse connection of the differential pressure transducer's high pressure and low pressure connecting pipes will make the output current smaller than 4mA, and smart pressure transducer can solve this problem only by selecting reverse output in parameter configuration.

Measuring range conversion table:

UnitkPaMPabarpsi
Measuring range0~50~0.0050~0.050~0.7
0~100~0.010~0.10~1.5
0~200~0.020~0.20~3
0~500~0.050~0.50~7
0~1000~0.10~10~14
-100~0-0.1~0-1~0-14~0
-100~100-0.1~0.1-1~1-14~14
0~6000~0.60~60~87
0~10000~10~100~145
0~16000~1.60~160~232
0~25000~2.50~250~362
0~60000~60~600~870
0~100000~100~1000~1450
0~200000~200~2000~2900
0~300000~300~3000~4351
0~400000~400~4000~5801
0~500000~500~5000~7252
0~600000~600~6000~8702
0~1000000~1000~10000~14503



Product reviews
Best Pressure Transducer for Air/Water/Oil
5
Alex
Avatar
1/17/2019 1:34 AM
We bought a lot of pressure transducers from different companies and compared them. We finally confirmed that ATO pressure transducer is the best. After the test, all its parameters are the best for measuring air/water/oil pressure. And then it is perfect in workmanship. Of course, we finally have to look at how long the service life of ATO pressure transducer will be.
Was this review helpful? Yes No (0/0)
I want to ask you a question about the pressure sensor
5
Michaele
Avatar
12/17/2021 1:26 AM
I want to ask you can I connect the pressure sensor output RS485 directly with pc by used cable RS485 converter, also can I connect 4 sensors to the computer at the same time?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes. First, all four sensors and PC (such as touch screens) must support RS485 communication protocol.
How to set the vfd?
5
Jeff
Avatar
3/3/2023 12:33 AM
Hello, I purchased this pressure sensor from you. https://www.ato.com/pressure-transducer-for-air-water-oil. What settings would I need to configure on your 5hp VFD - GK3000-2S0037 to maintain 65-75 PSI?
Was this review helpful? Yes No (0/0)
ATO Responded
The pressure unit of our VFD is MPa, so you need to convert PSI pressure into MPa, 65-75 PSI is approximately equal to 0.5-0.52MPa. Please refer to the attached document and demonstration video to set the pressure parameters of constant pressure water supply (P7.05, P7.19, P7.20, P7.27).
Video link: https://www.youtube.com/watch?v=OKR4tX4x0qQ&t=267s
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Pressure transducer for air/water/oil pressure measurement has optional output signal, such as 4-20mA/0-20mA/0-5V/1-5V/0-10V/RS485.

Application: Pressure transducer is widely used in process control, chemical, petroleum and metallurgical industry and other fields.

Specification:

ModelATO-PRES-P400
Weight1.6kg
Measuring range *-0.1~60MPa (-1~600bar/-14~8702psi)
Pressure typeGauge pressure (standard)
Contact us for absolute pressure, sealed pressure type (note that the measuring range for these two types must ≤1MPa)
Measure mediumAir, water, oil
Power supply *DC 12V, DC 24V, DC 12-36V
Output signal *4-20mA, 0-20mA, 0-5V, 1-5V, 0-10V, RS485
Accuracy *±0.5%FS, ±0.3%FS, ±1%FS (when output signal is 0-5V or 0-10V)
Zero temperature drift±0.03%FS/℃
Sensitivity temperature drift±0.03%FS/℃
Long term stability≤0.2%FS/year
Overload pressure200%FS
Frequency response (-3dB)5kHz~650kHz
Thread of pressure connection *G1/4, G1/2, 1/4NPT, 1/2NPT, M14*1.5, M20*1.5
Response time<10ms
Operating temperature-40~+80℃ (-40~+176℉)
Medium temperature-40~+60℃ (-40~+140℉)
MaterialHousing: 304 stainless steel
Fill fluid: silicon oil
Pressure port: 304 stainless steel, or 316L stainless steel (customizable)
Separating diaphragm: 304 stainless steel, or 316L stainless steel (customizable)
Protection classIP67

Note: * denotes optional parameters, you can select every parameter in drop-down lists to finish your order.

Pressure transducer dimension drawing (unit: mm):
Pressure transducer dimensional drawing
Pressure transducer wiring diagram:
Pressure transducer wiring drawing
Tips: Why the pressure transducer output signal is smaller than 4mA?
When the differential pressure transducer and orifice plate cooperate to measure flow rate, blockage or severe leakage of high pressure connecting pipe in differential pressure transducer makes the pressure in negative pressure chamber higher than that of positive pressure chamber, the output current of pressure transducer is smaller than 4mA. The output of the differential pressure transducer can return normal through the drainage, dredging the connecting pies or sealing the leakage points. Reverse connection of the differential pressure transducer's high pressure and low pressure connecting pipes will make the output current smaller than 4mA, and smart pressure transducer can solve this problem only by selecting reverse output in parameter configuration.

Product reviews
Best Pressure Transducer for Air/Water/Oil
5
Alex
Avatar
1/17/2019 1:34 AM
We bought a lot of pressure transducers from different companies and compared them. We finally confirmed that ATO pressure transducer is the best. After the test, all its parameters are the best for measuring air/water/oil pressure. And then it is perfect in workmanship. Of course, we finally have to look at how long the service life of ATO pressure transducer will be.
Was this review helpful? Yes No (0/0)
I want to ask you a question about the pressure sensor
5
Michaele
Avatar
12/17/2021 1:26 AM
I want to ask you can I connect the pressure sensor output RS485 directly with pc by used cable RS485 converter, also can I connect 4 sensors to the computer at the same time?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes. First, all four sensors and PC (such as touch screens) must support RS485 communication protocol.
How to set the vfd?
5
Jeff
Avatar
3/3/2023 12:33 AM
Hello, I purchased this pressure sensor from you. https://www.ato.com/pressure-transducer-for-air-water-oil. What settings would I need to configure on your 5hp VFD - GK3000-2S0037 to maintain 65-75 PSI?
Was this review helpful? Yes No (0/0)
ATO Responded
The pressure unit of our VFD is MPa, so you need to convert PSI pressure into MPa, 65-75 PSI is approximately equal to 0.5-0.52MPa. Please refer to the attached document and demonstration video to set the pressure parameters of constant pressure water supply (P7.05, P7.19, P7.20, P7.27).
Video link: https://www.youtube.com/watch?v=OKR4tX4x0qQ&t=267s
Only registered users can write reviews
Customers who bought this item also bought

3 hp VFD, Single Phase to Three Phase VFD

GK3000-2S0022
$238.14
Low price 3hp VFD, convert 220V/230V/240V 1 phase to 3 phase, 9.6 amps, RS485 enabled, shipping weight 3kg, manufacturer direct sale.

3 hp (2.2 kW) VFD, Three Phase 220V, 380V, 480V

GK3000-4T0022G
$280.48
Low cost 3 hp (2.2 kW) VFD, three phase 220V, 380V, 480V variable frequency drive, IP20 enclosure, RS485 enabled, V/F & vector control, brand new direct sale by manufacturer.

1/4 hp (200W) Brushless DC Motor, 24V/48V, 0.64 Nm

ATO-BLDC-200R3
$245.39
Cheap price 24 volt, 48 volt brushless DC motor for sale, 200 watt 3 phase BLDC electric motor and matching controller/ gearbox, 0.64 Nm holding torque, peak torque to 1.91 Nm, 3000 rpm low speed, IP54 duty continues. 1/4hp BLDC motor kit suitable for electric car application.