High Temperature Pressure Transducer, 100/300/3000/5000 PSI

$197.78
High-temperature pressure transducer provides selectable ranges from -0.1 to 60 MPa with current, voltage or RS485 output options. Its 2088-style housing supports air, water and oil pressure measurement at medium temperatures from -20°C to 300°C.
SKU: ATO-PRES-P400G
*
*
*
*
*
*
Free Shipping
Delivery date: 8-12 days

High temperature pressure transducer for air/water/oil pressure measurement has optional output signal, such as 4-20mA/0-20mA/0-5V/1-5V/0-10V/RS485, pressure measuring range (0~100/300/3000/5000 psi) can be customized.

Application: High temperature pressure transducer is widely used in process control, chemical, petroleum and metallurgical industry and other fields.

Specification:

ModelATO-PRES-P400G
Weight1.6kg
Measuring range *-0.1~60MPa (-1~600bar/-14~8702psi)
Pressure typeGauge pressure (standard)
Contact us for absolute pressure, sealed pressure type (note that the measuring range for these two types must ≤1MPa)
Measure mediumAir, water, oil
Power supply *DC 12V, DC 24V, DC 12-36V
Output signal *4-20mA, 0-20mA, 0-5V, 1-5V, 0-10V, RS485
Accuracy *±0.5%FS, ±0.3%FS, ±1%FS (when output signal is 0-5V or 0-10V)
Zero temperature drift±0.03%FS/℃
Sensitivity temperature drift±0.03%FS/℃
Long term stability≤0.2%FS/year
Overload pressure200%FS
Frequency response (-3dB)5kHz~650kHz
Thread of pressure connection *G1/4, G1/2, 1/4NPT, 1/2NPT, M14*1.5, M20*1.5
Response time<10ms
Operating temperature-40~+80℃ (-40~+176℉)
Medium temperature-20~+300℃ (-4~+572℉)
Quantity of cooling fins (medium temperature) *3 pieces (-20~+120℃/-4~+248℉), 5 pieces (-20~+180℃/-4~356℉), 7 pieces (-20~250℃/-4~+482℉)
Note: For higher medium temperature (-20~+300℃/-4~572℉), please contact us to customize a cooling pipe kits.
MaterialHousing: Cast aluminum
Fill fluid: Silicon oil
Pressure port: 316L stainless steel
Separating diaphragm: 316L stainless steel
Protection classIP67

Note: * denotes optional parameters, you can select every parameter in drop-down lists to finish your order.

High temperature pressure transducer dimension drawing (unit: mm):
High temperature pressure transducer dimensional drawing
Pressure transducer wiring diagram:
Pressure transducer wiring drawing
Tips: Outage and commissioning steps of on-site installed pressure transducer
The installation method of on-site installed pressure transducer and spring manometer are nearly the same, namely there's only one sampling valve. Sometimes, there's also a drain valve.
Note: On-site installed pressure transducer mentioned here mainly refers to the screw mounted transducer, such as the monocrystalline silicon pressure transducer.

  1. Outage Method of On-site Installed Pressure Transducer
    When stopping, close the sampling valve of on-site installed pressure transducer and open the drain valve slowly to remove the measured pressure. If there's no drain pressure, the pressure can only be relieved by slowly loosening the joint threads of pressure transmitter. When operating, be careful of medium pressure injury.
  2. Commissioning Method of On-site Installed Pressure Transducer
    When commissioning, open the sampling valve of on-site installed pressure transducer.

Measuring range conversion table:

UnitkPaMPabarpsi
Measuring range0~50~0.0050~0.050~0.7
0~100~0.010~0.10~1.5
0~200~0.020~0.20~3
0~500~0.050~0.50~7
0~1000~0.10~10~14
-100~0-0.1~0-1~0-14~0
-100~100-0.1~0.1-1~1-14~14
0~6000~0.60~60~87
0~10000~10~100~145
0~16000~1.60~160~232
0~25000~2.50~250~362
0~60000~60~600~870
0~100000~100~1000~1450
0~200000~200~2000~2900
0~300000~300~3000~4351
0~400000~400~4000~5801
0~500000~500~5000~7252
0~600000~600~6000~8702
0~1000000~1000~10000~14503



Product reviews
Related questions about high temperature pressure transducer
5
Mephod
Avatar
5/13/2021 9:42 PM
I want ask you can I connet the pressure sensore output RS485 directly with pc by used cable RS485 converter, also can I connect 4 sensor to the computer in the same time?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes. First, all four sensors and PC (such as touch screens) must support RS485 communication protocol.
Convenient High Temperature Pressure Sensor
5
Elainee
Avatar
6/14/2024 3:28 AM
I use this high-temperature pressure sensor to check the engine. It takes a lot of time for our auto repair shop to check the engine of the vehicle sent for repair, and we often make mistakes. The pressure values such as intake manifold pressure, exhaust pressure, turbocharger pressure, etc. are all important for the engine. Anyway, I have a question concerning the Pressure Transducers. Is 10Hz (1 data point every 0.1s) a good sampling rate to acquire data? There doesn't seem to be any mention of the sampling rate on the spec sheet.
Was this review helpful? Yes No (0/0)
ATO Responded
The response time of the pressure sensor is expected to be about 1 ms, which is close to the real-time display value.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

High temperature pressure transducer for air/water/oil pressure measurement has optional output signal, such as 4-20mA/0-20mA/0-5V/1-5V/0-10V/RS485, pressure measuring range (0~100/300/3000/5000 psi) can be customized.

Application: High temperature pressure transducer is widely used in process control, chemical, petroleum and metallurgical industry and other fields.

Specification:

ModelATO-PRES-P400G
Weight1.6kg
Measuring range *-0.1~60MPa (-1~600bar/-14~8702psi)
Pressure typeGauge pressure (standard)
Contact us for absolute pressure, sealed pressure type (note that the measuring range for these two types must ≤1MPa)
Measure mediumAir, water, oil
Power supply *DC 12V, DC 24V, DC 12-36V
Output signal *4-20mA, 0-20mA, 0-5V, 1-5V, 0-10V, RS485
Accuracy *±0.5%FS, ±0.3%FS, ±1%FS (when output signal is 0-5V or 0-10V)
Zero temperature drift±0.03%FS/℃
Sensitivity temperature drift±0.03%FS/℃
Long term stability≤0.2%FS/year
Overload pressure200%FS
Frequency response (-3dB)5kHz~650kHz
Thread of pressure connection *G1/4, G1/2, 1/4NPT, 1/2NPT, M14*1.5, M20*1.5
Response time<10ms
Operating temperature-40~+80℃ (-40~+176℉)
Medium temperature-20~+300℃ (-4~+572℉)
Quantity of cooling fins (medium temperature) *3 pieces (-20~+120℃/-4~+248℉), 5 pieces (-20~+180℃/-4~356℉), 7 pieces (-20~250℃/-4~+482℉)
Note: For higher medium temperature (-20~+300℃/-4~572℉), please contact us to customize a cooling pipe kits.
MaterialHousing: Cast aluminum
Fill fluid: Silicon oil
Pressure port: 316L stainless steel
Separating diaphragm: 316L stainless steel
Protection classIP67

Note: * denotes optional parameters, you can select every parameter in drop-down lists to finish your order.

High temperature pressure transducer dimension drawing (unit: mm):
High temperature pressure transducer dimensional drawing
Pressure transducer wiring diagram:
Pressure transducer wiring drawing
Tips: Outage and commissioning steps of on-site installed pressure transducer
The installation method of on-site installed pressure transducer and spring manometer are nearly the same, namely there's only one sampling valve. Sometimes, there's also a drain valve.
Note: On-site installed pressure transducer mentioned here mainly refers to the screw mounted transducer, such as the monocrystalline silicon pressure transducer.

  1. Outage Method of On-site Installed Pressure Transducer
    When stopping, close the sampling valve of on-site installed pressure transducer and open the drain valve slowly to remove the measured pressure. If there's no drain pressure, the pressure can only be relieved by slowly loosening the joint threads of pressure transmitter. When operating, be careful of medium pressure injury.
  2. Commissioning Method of On-site Installed Pressure Transducer
    When commissioning, open the sampling valve of on-site installed pressure transducer.
Product reviews
Related questions about high temperature pressure transducer
5
Mephod
Avatar
5/13/2021 9:42 PM
I want ask you can I connet the pressure sensore output RS485 directly with pc by used cable RS485 converter, also can I connect 4 sensor to the computer in the same time?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes. First, all four sensors and PC (such as touch screens) must support RS485 communication protocol.
Convenient High Temperature Pressure Sensor
5
Elainee
Avatar
6/14/2024 3:28 AM
I use this high-temperature pressure sensor to check the engine. It takes a lot of time for our auto repair shop to check the engine of the vehicle sent for repair, and we often make mistakes. The pressure values such as intake manifold pressure, exhaust pressure, turbocharger pressure, etc. are all important for the engine. Anyway, I have a question concerning the Pressure Transducers. Is 10Hz (1 data point every 0.1s) a good sampling rate to acquire data? There doesn't seem to be any mention of the sampling rate on the spec sheet.
Was this review helpful? Yes No (0/0)
ATO Responded
The response time of the pressure sensor is expected to be about 1 ms, which is close to the real-time display value.
Only registered users can write reviews
Customers who bought this item also bought

High Temperature Pressure Sensor for Steam/Fuel Oil

ATO-PRES-P300G
$153.97
High-temperature pressure sensor covers -0.1 to 100 MPa and supports 4–20mA, 0–20mA, voltage and RS485 outputs. Designed for steam, fuel oil and other high-temperature liquids, it supports medium temperatures up to 300°C and uses cooling fins for thermal isolation.