Pneumatic valve actuator is an executive device that uses air pressure to drive ball valve, butterfly or regulating valve. The pneumatic actuator is easy to repair and maintain, and has good adaptability to the environment.
Specifiation
- Model: ATO-AT075D
- Bore Size: 75mm (2.95 inch)
- Air Supply Port: 1/4 inch
- Power Source: Compressed Air
- Actuator Type: Double Acting
- Air Pressure: 2.5bar ~ 8bar
- Max Working Pressure: 10bar
- Operating Temperature (Optional): -20℃ ~ 80℃, -35℃ ~ 80℃, -20℃ ~ 150℃
- Rotation Angle: 90°±5%
- Body Material: Aluminum Alloy
- Life Time: One Million Time
Dimensions

ATO-AT075D
| Q | A | B | C | D | E | F | G | H | I |
| Φ50/Φ70mm | 213mm | 93mm | 42.5mm | 50.5mm | 130mm | 102mm | 30mm | 80mm | PF |
| J | K | O | P | S | T | U | V | W | X |
| M6 | 1/4" | 20mm | 40.5mm | 4mm | 4mm | 12mm | 24mm | 16mm | 32mm |
Details

| PN | Number | Name | Standard Material |
| 1 | 4 | Position Indicator | Polypropylene+GF |
| 2 | 1 | Position Indicator Seat | Polypropylene+GF |
| 3 | 1 | Snap Ring | Stainless Steel |
| 4 | 1 | Bearing | Stainless Steel |
| 5 | 1 | Bearing | Polyphthalamide |
| 6 | 1 | Bore Body | Extruded Aluminum alloy |
| 7 | 2 | Bearing | Polyphthalamide |
| 8 | 2 | Piston | Die Cast Aluminum |
| 9 | 2 | O-Ring | Nitrile(NBR70) |
| 10 | 2 | Bearing | Polyphthalamide |
| 11 | 8 | End Cover bolt gasket | Stainless Steel |
| 12 | 2 | End Cover bolt | Stainless Steel |
| 13 | 2 | Left and Right end Cover | Die Cast Aluminum |
| 14 | 2 | O-Ring | Nitrile(NBR70) |
| 15 | 2 | Guide Sleeve | Polypropylene+GF |
| 16 | 1 | O-Ring | Nitrile(NBR70) |
| 17 | 1 | Bearing | Nylon46 |
| 18 | 1 | Bearing | Polyphthalamide |
| 19 | 1 | Cam Switch | Stainless Steel |
| 20 | 1 | Actuating Shaft | Steel alloy |
| 21 | 1 | Bearing | Nylon46 |
| 22 | 1 | O-Ring | Nitrile(NBR70) |
| 23 | 1 | O-Ring | Nitrile(NBR70) |
| 24 | 2 | Spacer for Limit Bolt | Stainless Steel |
| 25 | 2 | Limit Nut | Stainless Steel |
| 26 | 2 | Limit Bolt | Stainless Steel |
| 27 | min.5/max.12 | Spring | High alloy Spring Steel |
| 28 | 1 | Spring Seat | Polypropylene+GF |
Tips: Difference between angular stroke and linear stroke pneumatic actuators
- When the angular stroke pneumatic actuator is working, its torque is in an arc map, which is consistent with the map when the ball valve and butterfly valve are opened and closed, so they can work more efficiently when matched.
- The straight-stroke gear type is about the force of the engagement between the piston and the gear. Due to the rough precision control, the damage rate is large.
Only registered users can write reviews