Double Acting Pneumatic Valve Actuator, 125mm Bore Size

$293.99
Double acting pneumatic valve actuator for butterfly or ball valve, powered by compressed air, air supply port 1/4 inch, bore size 125mm, air pressure 2.5bar ~ 8bar. Small size, light weight, quick opening and closing, easy to install & operate.
SKU: ATO-AT-125D
*
Free Shipping
Delivery date: 6-12 days

Pneumatic valve actuator is an executive device that uses air pressure to drive ball valve, butterfly or regulating valve. The pneumatic actuator is easy to repair and maintain, and has good adaptability to the environment.

Specifiation

  • Model: ATO-AT125D
  • Bore Size: 125mm (4.92 inch)
  • Air Supply Port: 1/4 inch
  • Power Source: Compressed Air
  • Actuator Type: Double Acting
  • Air Pressure: 2.5bar ~ 8bar
  • Max Working Pressure: 10bar
  • Operating Temperature (Optional): -20℃ ~ 80℃, -35℃ ~ 80℃, -20℃ ~ 150℃
  • Rotation Angle: 90°±5%
  • Body Material: Aluminum Alloy
  • Life Time: One Million Time

Dimensions

Pneumatic actuator dimension

ATO-AT125D

QABCDEFGHI
Φ70/Φ102mm349mm147mm67mm80mm189mm159mm30mm80mmPF
JKOPSTUVWX
M61/4"30mm56.5mm4mm4mm12mm24mm16mm32mm

Details

Pneumatic valve actuator details

PNNumberNameStandard Material
14Position IndicatorPolypropylene+GF
21Position Indicator SeatPolypropylene+GF
31Snap RingStainless Steel
41BearingStainless Steel
51BearingPolyphthalamide
61Bore BodyExtruded Aluminum alloy
72BearingPolyphthalamide
82PistonDie Cast Aluminum
92O-RingNitrile(NBR70)
102BearingPolyphthalamide
118End Cover bolt gasketStainless Steel
122End Cover boltStainless Steel
132Left and Right end CoverDie Cast Aluminum
142O-RingNitrile(NBR70)
152Guide SleevePolypropylene+GF
161O-RingNitrile(NBR70)
171BearingNylon46
181BearingPolyphthalamide
191Cam SwitchStainless Steel
201Actuating ShaftSteel alloy
211BearingNylon46
221O-RingNitrile(NBR70)
231O-RingNitrile(NBR70)
242Spacer for Limit BoltStainless Steel
252Limit NutStainless Steel
262Limit BoltStainless Steel
27min.5/max.12SpringHigh alloy Spring Steel
281Spring SeatPolypropylene+GF

Tips: Basic composition of pneumatic valve actuators

The type and structure of the adjustment mechanism of the pneumatic valve actuator are roughly the same, but the main difference is the actuator. Therefore, the pneumatic actuator is divided into two parts: the actuator and the regulating valve. Pneumatic actuator consists of two parts: actuator and regulating valve (regulating mechanism). According to the size of the control signal, the corresponding thrust is generated to push the regulating valve to act. The regulating valve is the regulating part of the pneumatic actuator. Under the action of the thrust of the actuator, the regulating valve produces a certain displacement or rotation angle to directly regulate the flow of the fluid.

Double Acting Pneumatic Valve Actuator Output Torque Table

Unit: Nm

ModelStandard3bar3.5bar4bar4.5bar5bar5.5bar6bar7bar8bar
ATO-AT032D3.64.355.76.47.388.71011.6
ATO-AT050D8.410.111.713.515.116.718.42023.426.7
ATO-AT063D14.817.720.623.626.529.432.335.3410147
ATO-AT075D29.23540.846.652.558.364.169.981.593.2
ATO-AT088D45.95564.273.382.591.6101.1110.1128.1146.1
ATO-AT100D66.880.193.4106.3120.3133.3146.3160.3183.3213.3
ATO-AT125D139167195223250278303333389444
ATO-AT145D217261304348391434478521608695
ATO-AT160D285341398455512577625682795909
ATO-AT190D53363974685297610651171127714901703
ATO-AT240D893107212501430160817871965214425022859
ATO-AT270D1306156518242084234326032862312136404159

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Pneumatic valve actuator is an executive device that uses air pressure to drive ball valve, butterfly or regulating valve. The pneumatic actuator is easy to repair and maintain, and has good adaptability to the environment.

Specifiation

  • Model: ATO-AT125D
  • Bore Size: 125mm (4.92 inch)
  • Air Supply Port: 1/4 inch
  • Power Source: Compressed Air
  • Actuator Type: Double Acting
  • Air Pressure: 2.5bar ~ 8bar
  • Max Working Pressure: 10bar
  • Operating Temperature (Optional): -20℃ ~ 80℃, -35℃ ~ 80℃, -20℃ ~ 150℃
  • Rotation Angle: 90°±5%
  • Body Material: Aluminum Alloy
  • Life Time: One Million Time

Dimensions

Pneumatic actuator dimension

ATO-AT125D

QABCDEFGHI
Φ70/Φ102mm349mm147mm67mm80mm189mm159mm30mm80mmPF
JKOPSTUVWX
M61/4"30mm56.5mm4mm4mm12mm24mm16mm32mm

Details

Pneumatic valve actuator details

PNNumberNameStandard Material
14Position IndicatorPolypropylene+GF
21Position Indicator SeatPolypropylene+GF
31Snap RingStainless Steel
41BearingStainless Steel
51BearingPolyphthalamide
61Bore BodyExtruded Aluminum alloy
72BearingPolyphthalamide
82PistonDie Cast Aluminum
92O-RingNitrile(NBR70)
102BearingPolyphthalamide
118End Cover bolt gasketStainless Steel
122End Cover boltStainless Steel
132Left and Right end CoverDie Cast Aluminum
142O-RingNitrile(NBR70)
152Guide SleevePolypropylene+GF
161O-RingNitrile(NBR70)
171BearingNylon46
181BearingPolyphthalamide
191Cam SwitchStainless Steel
201Actuating ShaftSteel alloy
211BearingNylon46
221O-RingNitrile(NBR70)
231O-RingNitrile(NBR70)
242Spacer for Limit BoltStainless Steel
252Limit NutStainless Steel
262Limit BoltStainless Steel
27min.5/max.12SpringHigh alloy Spring Steel
281Spring SeatPolypropylene+GF

Tips: Basic composition of pneumatic valve actuators

The type and structure of the adjustment mechanism of the pneumatic valve actuator are roughly the same, but the main difference is the actuator. Therefore, the pneumatic actuator is divided into two parts: the actuator and the regulating valve. Pneumatic actuator consists of two parts: actuator and regulating valve (regulating mechanism). According to the size of the control signal, the corresponding thrust is generated to push the regulating valve to act. The regulating valve is the regulating part of the pneumatic actuator. Under the action of the thrust of the actuator, the regulating valve produces a certain displacement or rotation angle to directly regulate the flow of the fluid.

Only registered users can write reviews