Double Acting Pneumatic Valve Actuator, 115mm Bore Size

$270.99
ATO pneumatic valve actuator with low price for butterfly or ball valve, double acting type, 115mm bore size, aluminum alloy body material, powered by compressed air, air supply port 1/4 inch, air pressure 2.5bar ~ 8bar. Air operated actuator has small size and large torque, which is perfect for valve control.
SKU: ATO-AT-115D
*
Free Shipping
Delivery date: 6-12 days

Pneumatic valve actuator is an executive device that uses air pressure to drive ball valve, butterfly or regulating valve. The pneumatic actuator is easy to repair and maintain, and has good adaptability to the environment.

Specifiation

  • Model: ATO-AT115D
  • Bore Size: 115mm (4.53 inch)
  • Air Supply Port: 1/4 inch
  • Power Source: Compressed Air
  • Actuator Type: Double Acting
  • Air Pressure: 2.5bar ~ 8bar
  • Max Working Pressure: 10bar
  • Operating Temperature (Optional): -20℃ ~ 80℃, -35℃ ~ 80℃, -20℃ ~ 150℃
  • Rotation Angle: 90°±5%
  • Body Material: Aluminum Alloy
  • Life Time: One Million Time

Dimensions

Pneumatic actuator dimension

ATO-AT115D

QABCDEFGHI
Φ70/Φ102316mm139mm64.5mm74.5mm185mm145mm30mm80mmPF
JKOPSTUVWX
M61/4"30mm62mm4mm4mm12mm24mm16mm32mm

Details

Pneumatic valve actuator details

PNNumberNameStandard Material
14Position IndicatorPolypropylene+GF
21Position Indicator SeatPolypropylene+GF
31Snap RingStainless Steel
41BearingStainless Steel
51BearingPolyphthalamide
61Bore BodyExtruded Aluminum alloy
72BearingPolyphthalamide
82PistonDie Cast Aluminum
92O-RingNitrile(NBR70)
102BearingPolyphthalamide
118End Cover bolt gasketStainless Steel
122End Cover boltStainless Steel
132Left and Right end CoverDie Cast Aluminum
142O-RingNitrile(NBR70)
152Guide SleevePolypropylene+GF
161O-RingNitrile(NBR70)
171BearingNylon46
181BearingPolyphthalamide
191Cam SwitchStainless Steel
201Actuating ShaftSteel alloy
211BearingNylon46
221O-RingNitrile(NBR70)
231O-RingNitrile(NBR70)
242Spacer for Limit BoltStainless Steel
252Limit NutStainless Steel
262Limit BoltStainless Steel
27min.5/max.12SpringHigh alloy Spring Steel
281Spring SeatPolypropylene+GF

Tips: Pneumatic valve actuator working principle

When the compressed air enters the pneumatic actuator from the A nozzle, the gas pushes the double piston to move linearly to both ends (cylinder head end), the rack on the piston drives the gear on the rotating shaft to rotate 90 degrees counterclockwise, and the valve is opened. . At this time, the gas at both ends of the pneumatic actuator valve is discharged with the B nozzle. On the contrary, when the compressed air enters the two ends of the pneumatic actuator from the nozzle B, the gas pushes the double plug to move linearly to the middle, the rack on the piston drives the gear on the rotating shaft to rotate 90 degrees clockwise, and the valve is closed. At this time, the gas in the middle of the pneumatic actuator is discharged with the A nozzle. The above is the standard transmission principle. According to the user's needs, the pneumatic actuator can be installed in the opposite transmission principle to the standard type, that is, the clockwise rotation of the selected shaft is to open the valve, and the counterclockwise rotation is to close the valve. The single-acting (spring return type) pneumatic actuator A nozzle is the air inlet, and the B nozzle is the exhaust hole (the B nozzle should be equipped with a muffler). The inlet of the nozzle A is to open the valve, and the valve is closed by the spring force when the gas is cut off.

Double Acting Pneumatic Valve Actuator Output Torque Table

Unit: Nm

ModelStandard3bar3.5bar4bar4.5bar5bar5.5bar6bar7bar8bar
ATO-AT032D3.64.355.76.47.388.71011.6
ATO-AT050D8.410.111.713.515.116.718.42023.426.7
ATO-AT063D14.817.720.623.626.529.432.335.3410147
ATO-AT075D29.23540.846.652.558.364.169.981.593.2
ATO-AT088D45.95564.273.382.591.6101.1110.1128.1146.1
ATO-AT100D66.880.193.4106.3120.3133.3146.3160.3183.3213.3
ATO-AT125D139167195223250278303333389444
ATO-AT145D217261304348391434478521608695
ATO-AT160D285341398455512577625682795909
ATO-AT190D53363974685297610651171127714901703
ATO-AT240D893107212501430160817871965214425022859
ATO-AT270D1306156518242084234326032862312136404159

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Pneumatic valve actuator is an executive device that uses air pressure to drive ball valve, butterfly or regulating valve. The pneumatic actuator is easy to repair and maintain, and has good adaptability to the environment.

Specifiation

  • Model: ATO-AT115D
  • Bore Size: 115mm (4.53 inch)
  • Air Supply Port: 1/4 inch
  • Power Source: Compressed Air
  • Actuator Type: Double Acting
  • Air Pressure: 2.5bar ~ 8bar
  • Max Working Pressure: 10bar
  • Operating Temperature (Optional): -20℃ ~ 80℃, -35℃ ~ 80℃, -20℃ ~ 150℃
  • Rotation Angle: 90°±5%
  • Body Material: Aluminum Alloy
  • Life Time: One Million Time

Dimensions

Pneumatic actuator dimension

ATO-AT115D

QABCDEFGHI
Φ70/Φ102316mm139mm64.5mm74.5mm185mm145mm30mm80mmPF
JKOPSTUVWX
M61/4"30mm62mm4mm4mm12mm24mm16mm32mm

Details

Pneumatic valve actuator details

PNNumberNameStandard Material
14Position IndicatorPolypropylene+GF
21Position Indicator SeatPolypropylene+GF
31Snap RingStainless Steel
41BearingStainless Steel
51BearingPolyphthalamide
61Bore BodyExtruded Aluminum alloy
72BearingPolyphthalamide
82PistonDie Cast Aluminum
92O-RingNitrile(NBR70)
102BearingPolyphthalamide
118End Cover bolt gasketStainless Steel
122End Cover boltStainless Steel
132Left and Right end CoverDie Cast Aluminum
142O-RingNitrile(NBR70)
152Guide SleevePolypropylene+GF
161O-RingNitrile(NBR70)
171BearingNylon46
181BearingPolyphthalamide
191Cam SwitchStainless Steel
201Actuating ShaftSteel alloy
211BearingNylon46
221O-RingNitrile(NBR70)
231O-RingNitrile(NBR70)
242Spacer for Limit BoltStainless Steel
252Limit NutStainless Steel
262Limit BoltStainless Steel
27min.5/max.12SpringHigh alloy Spring Steel
281Spring SeatPolypropylene+GF

Tips: Pneumatic valve actuator working principle

When the compressed air enters the pneumatic actuator from the A nozzle, the gas pushes the double piston to move linearly to both ends (cylinder head end), the rack on the piston drives the gear on the rotating shaft to rotate 90 degrees counterclockwise, and the valve is opened. . At this time, the gas at both ends of the pneumatic actuator valve is discharged with the B nozzle. On the contrary, when the compressed air enters the two ends of the pneumatic actuator from the nozzle B, the gas pushes the double plug to move linearly to the middle, the rack on the piston drives the gear on the rotating shaft to rotate 90 degrees clockwise, and the valve is closed. At this time, the gas in the middle of the pneumatic actuator is discharged with the A nozzle. The above is the standard transmission principle. According to the user's needs, the pneumatic actuator can be installed in the opposite transmission principle to the standard type, that is, the clockwise rotation of the selected shaft is to open the valve, and the counterclockwise rotation is to close the valve. The single-acting (spring return type) pneumatic actuator A nozzle is the air inlet, and the B nozzle is the exhaust hole (the B nozzle should be equipped with a muffler). The inlet of the nozzle A is to open the valve, and the valve is closed by the spring force when the gas is cut off.

Only registered users can write reviews