PLC Motion Controller, 3-Axis/4-Axis

$926.15
PLC motion controller PM series can execute basic instructions, applied instructions, motion instructions with program capacity up to 64k steps and data register 10k words, offering 4-axis linear interpolation or 3-axis linear/arc/helical interpolation (based on models). Different models of motion controllers support different program frameworks and functions, to suit your different applications.
SKU: ATO-PLC-PM
*
*
Free Shipping
Delivery date: 6-12 days

PLC Programmable Logic Controller DVP-PM series is available with DVP10PM00M standard motion controller for general applications and ATO-DVP20PM00D/M advanced motion controllers which are not only excellent motion controllers, but also can be used as motion extension modules and support advanced motion control functions, more flexible in all kinds of applications.

Specification

ModelATO-DVP10PM00MATO-DVP20PM00D/ DVP20PM00M
MPU PointsBuilt-in 24 I/O, max. 256 I/O pointBuilt-in 16 I/O, max. 256 I/O point
Program Capacity64k steps64k steps
Data Register10k words10k words
Features
  • Excellent execution speed LD: 0.13 μs, MOV: 2.1 μs
  • 4 axes linear interpolation motion control
  • High accuracy PWM 200 kHz output, resolution 0.3%
  • 8 groups of high-speed captures (mark correction, frequency measurement), comparative output, Mark / Mask function (for bag making)
  • Built-in RS-232 and RS-485 ports, and supports standard Modbus ASCII / RTU protocol
  • Compatible with G-code / M-Code
  • 3-axis linear / arc / helical interpolation
  • Supports electronic cam (2,048 points) function for flying shear and rotary cut applications
  • All models can be applied as motion controllers or extension modules
  • Built-in RS-232 and RS-485 ports, and supports standard Modbus ASCII/RTU protocol
Motion Control Functions
  • High-speed pulse output: built-in 6 sets of A / B phase pulse outputs
  • 2 sets of 200 kHz output, 4 sets of 1 MHz output
  • 6 sets of high-speed counters and hardware digital filter for counting
  • Supports MPG inputs
  • Single-axis motion control function (supports MPG, single-speed and two-speed positioning)
  • Electronic gear function
  • Built-in A / B phase differential signal outputs: 2 sets (DVP20PM00D) / 3 sets (DVP20PM00M) max. differential output frequency 500 kHz
  • Supports MPG inputs
  • Single-axis motion control function (supports MPG, single-speed and two-speed positioning)
  • Electronic gear function
Function Card (Optional)DVP-FPMC Ethernet/CANopen communication card:
  • Complies with CANopen CiA301 V4.0.2 protocol.
  • Provides high-speed program upload/download via Ethernet.
Electrical
Power Supply100 ~ 240V AC (-15% ~ +10%), 50/60Hz ±5%
Fuse Capacity2A / 250V AC
Power Consumption60VA
DC 24V Current Output500mA
Power ProtectionDC 24V output short circuit protection
Voltage Withstand1500VAC (Primary-secondary), 1500VAC (Primary-PE), 500VAC (Secondary-PE)
Insulation Resistance>5MΩ at 500VDC (between all I/O points and ground)
Noise ImmunityESD: 8kV Air Discharge
EFT: Power Line: 2kV, Digital I/O: 1kV, Analog & Communication I/O: 250V
GroundingThe diameter of grounding wire shall not be less than that of L, N terminal of the power supply.
(When many PLCs are in use at the same time, please make sure every PLC is properly grounded.)
EnvironmentOperation: 0°C~55°C (temperature), 5~95% (humidity), pollution degree 2
Storage: -25°C~70°C (temperature), 5~95% (humidity)
Vibration/Shock ImmunityInternational standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/ IEC61131-2 & IEC 68-2-27 (TEST Ea)
Weight612g696g
Documents (Please refer to the below PDF for more details)
Instruction SheetDVP10PM00M Instruction SheetDVP20PM00D/M Instruction Sheet

Dimensions (Unit: mm)

Motion Controller Dimensions

ModelHH1WW1W2
DVP10PM00M9080143.5133.582
DVP20PM00D908017416482
DVP20PM00M908017416482

How to control a stepper motor using a PLC and HMI?

This video shows you how to configure a PLC, HMI, motor driver, and proximity sensor to perform Origin Return (OPR) control of a stepper motor.

Four Ways to Control VFD with PLC

This video introduces the main wiring methods between PLC and VFD, including digital control, analog control, serial communication and Ethernet connection. The choice of connection method depends on the specific application requirements, system complexity, cost considerations and the need for control accuracy and flexibility.

PLC and HMI Analog Output (0-10V) Programming

In this tutorial, we will walk you through the structured system setup between the HMI, PLC, and VFD, as well as the programming steps required for seamless operation.

Product reviews
PLC payment methods
5
Misty
Avatar
2/24/2021 12:09 AM
I want to buy this PLC motion controller, how can I pay for it?
Was this review helpful? Yes No (0/0)
ATO Responded
Just pay online.
Performs well
4
Oliver45
Avatar
10/9/2023 8:27 PM
Whether it is a 3-axis or 4-axis application, this PLC motion controller performs well. Its reliability allows us to run our machines with confidence and low maintenance costs.
Was this review helpful? Yes No (0/0)
Ease of Programming
5
Fiora
Avatar
11/23/2023 12:48 AM
The motion controller offers user-friendly programming interfaces, making it accessible to both experienced engineers and those newer to PLC programming. The ability to program complex motion sequences with relative ease contributes to efficient system implementation.
Was this review helpful? Yes No (0/0)
Flexibility in production
4
Gariel
Avatar
11/23/2023 11:22 PM
Very pleased with the purchase of the PLC motion controller version 4-axis. Compared to the 3-axis version, the 4-axis version gives us more flexibility in our production line and meets a wide range of complex motion requirements. The system is stable and the technical support is responsive, making it a wise investment.
Was this review helpful? Yes No (0/0)
Awesome controller
5
Eric
Avatar
9/12/2025 2:58 AM
Smooth 4-axis control, accurate pulses, easy setup with Modbus and G-code.Great value for money.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

PLC Programmable Logic Controller DVP-PM series is available with DVP10PM00M standard motion controller for general applications and ATO-DVP20PM00D/M advanced motion controllers which are not only excellent motion controllers, but also can be used as motion extension modules and support advanced motion control functions, more flexible in all kinds of applications.

Specification

ModelATO-DVP10PM00MATO-DVP20PM00D/ DVP20PM00M
MPU PointsBuilt-in 24 I/O, max. 256 I/O pointBuilt-in 16 I/O, max. 256 I/O point
Program Capacity64k steps64k steps
Data Register10k words10k words
Features
  • Excellent execution speed LD: 0.13 μs, MOV: 2.1 μs
  • 4 axes linear interpolation motion control
  • High accuracy PWM 200 kHz output, resolution 0.3%
  • 8 groups of high-speed captures (mark correction, frequency measurement), comparative output, Mark / Mask function (for bag making)
  • Built-in RS-232 and RS-485 ports, and supports standard Modbus ASCII / RTU protocol
  • Compatible with G-code / M-Code
  • 3-axis linear / arc / helical interpolation
  • Supports electronic cam (2,048 points) function for flying shear and rotary cut applications
  • All models can be applied as motion controllers or extension modules
  • Built-in RS-232 and RS-485 ports, and supports standard Modbus ASCII/RTU protocol
Motion Control Functions
  • High-speed pulse output: built-in 6 sets of A / B phase pulse outputs
  • 2 sets of 200 kHz output, 4 sets of 1 MHz output
  • 6 sets of high-speed counters and hardware digital filter for counting
  • Supports MPG inputs
  • Single-axis motion control function (supports MPG, single-speed and two-speed positioning)
  • Electronic gear function
  • Built-in A / B phase differential signal outputs: 2 sets (DVP20PM00D) / 3 sets (DVP20PM00M) max. differential output frequency 500 kHz
  • Supports MPG inputs
  • Single-axis motion control function (supports MPG, single-speed and two-speed positioning)
  • Electronic gear function
Function Card (Optional)DVP-FPMC Ethernet/CANopen communication card:
  • Complies with CANopen CiA301 V4.0.2 protocol.
  • Provides high-speed program upload/download via Ethernet.
Electrical
Power Supply100 ~ 240V AC (-15% ~ +10%), 50/60Hz ±5%
Fuse Capacity2A / 250V AC
Power Consumption60VA
DC 24V Current Output500mA
Power ProtectionDC 24V output short circuit protection
Voltage Withstand1500VAC (Primary-secondary), 1500VAC (Primary-PE), 500VAC (Secondary-PE)
Insulation Resistance>5MΩ at 500VDC (between all I/O points and ground)
Noise ImmunityESD: 8kV Air Discharge
EFT: Power Line: 2kV, Digital I/O: 1kV, Analog & Communication I/O: 250V
GroundingThe diameter of grounding wire shall not be less than that of L, N terminal of the power supply.
(When many PLCs are in use at the same time, please make sure every PLC is properly grounded.)
EnvironmentOperation: 0°C~55°C (temperature), 5~95% (humidity), pollution degree 2
Storage: -25°C~70°C (temperature), 5~95% (humidity)
Vibration/Shock ImmunityInternational standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/ IEC61131-2 & IEC 68-2-27 (TEST Ea)
Weight612g696g
Documents (Please refer to the below PDF for more details)
Instruction SheetDVP10PM00M Instruction SheetDVP20PM00D/M Instruction Sheet

Dimensions (Unit: mm)

Motion Controller Dimensions

ModelHH1WW1W2
DVP10PM00M9080143.5133.582
DVP20PM00D908017416482
DVP20PM00M908017416482
Product reviews
PLC payment methods
5
Misty
Avatar
2/24/2021 12:09 AM
I want to buy this PLC motion controller, how can I pay for it?
Was this review helpful? Yes No (0/0)
ATO Responded
Just pay online.
Performs well
4
Oliver45
Avatar
10/9/2023 8:27 PM
Whether it is a 3-axis or 4-axis application, this PLC motion controller performs well. Its reliability allows us to run our machines with confidence and low maintenance costs.
Was this review helpful? Yes No (0/0)
Ease of Programming
5
Fiora
Avatar
11/23/2023 12:48 AM
The motion controller offers user-friendly programming interfaces, making it accessible to both experienced engineers and those newer to PLC programming. The ability to program complex motion sequences with relative ease contributes to efficient system implementation.
Was this review helpful? Yes No (0/0)
Flexibility in production
4
Gariel
Avatar
11/23/2023 11:22 PM
Very pleased with the purchase of the PLC motion controller version 4-axis. Compared to the 3-axis version, the 4-axis version gives us more flexibility in our production line and meets a wide range of complex motion requirements. The system is stable and the technical support is responsive, making it a wise investment.
Was this review helpful? Yes No (0/0)
Awesome controller
5
Eric
Avatar
9/12/2025 2:58 AM
Smooth 4-axis control, accurate pulses, easy setup with Modbus and G-code.Great value for money.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews