Programmable Logic Controller, 16/20/32/40/48/64/80 I/O

$308.92
High-performance PLC has large program capacity (30k steps) and data registers (12k words), with 16/20/32/40/48/64/80 I/O points, relay or transistor output, two differential output available in DVP32EH00M3/MT and 4 axes of 200kHz pulse output in DVP40/48/64/80EH00T3. This series of programmable logic controller features excellent motion control, complete program protection, and flexible function extension modules & cards, best for more demanding and complex applications.
SKU: ATO-PLC-EH3
*
Free Shipping
Delivery date: 6-12 days

High-performance Programmable Logic Controller (PLC) DVP-EH3 provides large program capacity (30k steps) and data register (12k words) for more demanding and complex applications such as high-speed 3-axis servo welding machine, high-speed cutting machine, bar feeder, distributed monitor system in production line.

Specification

ModelATO-DVP-EH3
Built-in I/O Points16 / 20 / 32 / 40 / 48 / 60 / 80
Power Supply100 ~ 240V AC (-15% ~ +10%), 50/60Hz ±5%
Fuse Capacity2A / 250V AC
Power Consumption16/20 I/O: 50VA
32/40/48 I/O: 60VA
60/80 I/O: 80VA
DC 24V Current Output500mA
Power Supply ProtectionDC 24V output short circuit protection
Voltage Withstand1500VAC (Primary-secondary), 1500VAC (Primary-PE), 500VAC (Secondary-PE)
Insulation Resistance>5MΩ at 500VDC (between all I/O points and ground)
Noise ImmunityESD: 8kV Air Discharge
EFT: Power Line: 2kV, Digital I/O: 1kV, Analog & Communication I/O: 1kV
Damped-Oscillatory Wave: Power Line 1kV, Digital I/O: 1kV
RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m
GroundingThe diameter of grounding wire shall not be less than that of L, N terminal of the power supply.
(When many PLCs are in use at the same time, please make sure every PLC is properly grounded.)
EnvironmentOperation: 0°C~55°C (temperature), 5~95% (humidity), pollution degree 2
Storage: -25°C~70°C (temperature), 5~95% (humidity)
Vibration/Shock ResistanceInternational standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/ IEC61131-2 & IEC 68-2-27 (TEST Ea)
WeightSee below "Selection Table"

Selection Table

ModelNo. of Inputs
No. of Outputs
Output Type
Input/OutputWeight
DVP16EH00R388Relay2 counters of 200 kHz input500g
DVP16EH00T388Transistor2 counters of 200 kHz input
2 axes of 200 kHz output
480g
DVP20EH00R3128Relay2 counters of 200 kHz input,
1 counter of 20 kHz input
520g
DVP20EH00T3128Transistor2 counters of 200 kHz input,
2 axes of 200 kHz output
500g
DVP32EH00R31616Relay4 counters of 200 kHz input652g
DVP32EH00T31616Transistor4 counters of 200 kHz input,
4 axes of 200 kHz output
612g
DVP32EH00M31616Relay
Differenttial output
4 counters of 200 kHz input (Differenttial: 2 sets),
2 axes of 200 kHz output (Differenttial: 2 axes)
644g
DVP32EH00MT1616Transistor
Differenttial output
4 counters of 200 kHz input (Differenttial: 2 sets)
2 axes of 200 kHz output (Differenttial: 2 axes)
615g
DVP32EH00R3-L*1616Relay4 counters of 200 kHz input652g
DVP32EH00T3-L*1616Transistor4 counters of 200 kHz input
4 axes of 200 kHz output
612g
DVP40EH00R32416Relay4 counters of 200 kHz input710g
DVP40EH00T32416Transistor4 counters of 200 kHz input
4 axes of 200 kHz output
675g
DVP48EH00R32424Relay4 counters of 200 kHz input748g
DVP48EH00T32424Transistor4 counters of 200 kHz input
4 axes of 200 kHz output
688g
DVP64EH00R33232Relay4 counters of 200 kHz input836g
DVP64EH00T33232Transistor4 counters of 200 kHz input
4 axes of 200 kHz output
756g
DVP80EH00R34040Relay4 counters of 200 kHz input948g
DVP80EH00T34040Transistor4 counters of 200 kHz input
4 axes of 200 kHz output
848g

Note: * Supports high-speed extension (left-side).

PLC I/O Point Specification

Input Points
ItemTwo Differential Inputs (200kHz)24V DC Single Common Port Input
200kHz20kHz10kHzNormal Input
Input Wiring TypeIndependent wiringChange wiring from S/S to SINK or SOURCE
Input Voltage (±10%)5~24V DC24V DC
Input Point Configuration#1#2#3#4#5
Input Impedance4.7k Ohm3.3k Ohm4.7k Ohm
Active LevelOff → On>1mA (5V)>6mA (18.5V)>4mA (16.5V)
On → Off<0.4mA (2V)<2.2mA (8V)<1.5mA (8V)
Response Time #6Off → On<150ns<150ns<3.5μs<8μs<10ms
On → Off<3μs<3μs<20μs<60μs<20ms
#1. For DVP32EH00M3/MT, the bandwidth of the two differential input points X0, X1, X4, and X5 is 200kHz.
#2. The bandwidth of the input points X0, X1, X4, X5, X10, X11, X14, and X15 is 200kHz (excluding X10 and X11 on DVP20EH3).
#3. For DVP20EH00R3/T3, the bandwidth of the input points X10 and X11 is 20kHz.
#4. The bandwidth of the input points X2, X3, X6, X7, X12, X13, X16, and X17 is 10kHz.
#5. X20 and above on EH3 are normal input points.
#6. The filter times of X0~X7 and X10~X17 can be adjusted by D1020 and D1021 respectively within 0~60ms.
Output Points
ItemTwo Differential Outputs #1Single Common Port
Transistor Output
Single Common Port
Relay Output
High Speed #2Low Speed #3Normal Output #4
Max. Frequency200kHz200kHz10kHzLoad ON/OFF control
Minimum Load-2mA/DC power supply
Working Voltage5VDC5~30VDC<250VAC, 30VDC
InsulationLine driverPhoto coupler isolationMagnetic isolation
Maximum LoadResistive<25mA0.5A/1 point (4A/COM)2A/1 point (5A/COM)
Inductive-12W (24VDC)#5
Lamp-2W (24VDC)20WDC/100WAC
Max. Output Response Time0.2μs0.2μsOff → On: 20μs
On → Off: 30μs
10ms
Over-Current ProtectionN/A
#1. For DVP32EH00M3, the bandwidth of the differential output points Y0~Y3 is 200kHz, and the other output points are relay output points. For DVP32EH00MT, the bandwidth of the differential output points Y0~Y3 is 200kHz, and the other output points are transistor output points.
#2. For DVP40/48/64/80EH3, the bandwidth of the output points Y0~Y3, Y4 and Y6 is 200kHz. For DVP16/20EH3, the bandwidth of the output points Y0 and Y2 is 200kHz. For DVP32EH3, the bandwidth of the output points Y0, Y2, Y4, and Y6 is 200kHz.
#3. For DVP40/48/64/80EH3, the bandwidth of the output points Y5 and Y7 is 10kHz. For DVP16/20EH3, the bandwidth of the output points Y1 and Y3~Y7 is 10kHz. For DVP32EH3, the bandwidth of the output points Y1, Y3, Y5, and Y7 is 10kHz.
#4. Y10 and above on EH3 are normal output points.
#5. Life curves for relays
PLC Controller Life Curve

Dimensions (Unit: mm)

PLC Controller EH3 Series Dimensions

Model16EH00R/T320EH00R/T332EH00R/T332EH00M3/MT40EH00R/T348EH00R/T364EH00R/T380EH00R/T3
W113113143.5158.8158.8174212276
W1103103133.5153.8153.8164202266

DVP-EH3 Programmable Logic Controller (PLC) Features

1. High-performance Programmable Logic Controller (PLC) with large program capacity and data registers for more demanding and complex applications

  • Program capacity: 30 k steps
  • Data register: 12 k words
  • Execution speed: 4X

2. Excellent Motion Control

  • High-speed pulse output: 4 axes of 200kHz pulse output (DVP40/48/64/80EH00T3 ONLY)
  • Supports max. 4 hardware 200kHz high-speed counters
  • Various motion control instructions to achieve high-speed and high-precision positioning control for labeling machines, packaging machines, printing machines, etc.
  • Offers linear / arc interpolation motion control
  • Provides up to 16 external interrupt pointers

3. Complete Program Protection

  • Auto backup function to prevent programs and data loss even when the battery runs out
  • Secondary backup function saves an extra copy of programs and data to enhance program safety
  • Up to 4-level password protection to protect your source programs and intellectual property

4. Outstanding Operation Performance

  • 32-bit CPU + ASIC dual processors support floating point operations
  • Max. execution speed of basic instructions up to 0.24μs

5. Flexible Function Extension Modules & Cards

  • Multiple selections of extension modules and function cards: analog I/O, temperature measurement, additional single-axis motion control, high-speed counting
  • The 3rd serial communication port and Ethernet communication card are available.

6. PLC-Link

  • PLC Link allows the user to link up a max. 32 units to the network without installing extra communication extension modules.

How to control a stepper motor using a PLC and HMI?

This video shows you how to configure a PLC, HMI, motor driver, and proximity sensor to perform Origin Return (OPR) control of a stepper motor.

Four Ways to Control VFD with PLC

This video introduces the main wiring methods between PLC and VFD, including digital control, analog control, serial communication and Ethernet connection. The choice of connection method depends on the specific application requirements, system complexity, cost considerations and the need for control accuracy and flexibility.

PLC and HMI Analog Output (0-10V) Programming

In this tutorial, we will walk you through the structured system setup between the HMI, PLC, and VFD, as well as the programming steps required for seamless operation.

Product reviews
I have to buy another programmable logic controller
5
Cabldwin
Avatar
8/25/2021 8:24 PM
I have used this programmable logic controller from ATO.com and it feels very easy to use. I want to buy another programmable logic controller and I would recommend it to everyone.
Was this review helpful? Yes No (0/0)
exceeded my expectations
5
Hank
Avatar
4/13/2022 2:26 AM
This is an amazing product! It exceeded my expectations! I bought it for my cutting machine, it's easu tu use and operating normally
Was this review helpful? Yes No (0/0)
very reliable programmable logic controller
4
Bianca007
Avatar
10/22/2025 7:52 PM
I've been using this programmable logic controller for a high-speed cutting machine, and it handles complex motion control flawlessly. The large program capacity is perfect for our demanding applications without any lag. The only minor issue is that the initial setup and wiring took a bit longer than expected. But once it's running, it's stable and efficient.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

High-performance Programmable Logic Controller (PLC) DVP-EH3 provides large program capacity (30k steps) and data register (12k words) for more demanding and complex applications such as high-speed 3-axis servo welding machine, high-speed cutting machine, bar feeder, distributed monitor system in production line.

Specification

ModelATO-DVP-EH3
Built-in I/O Points16 / 20 / 32 / 40 / 48 / 60 / 80
Power Supply100 ~ 240V AC (-15% ~ +10%), 50/60Hz ±5%
Fuse Capacity2A / 250V AC
Power Consumption16/20 I/O: 50VA
32/40/48 I/O: 60VA
60/80 I/O: 80VA
DC 24V Current Output500mA
Power Supply ProtectionDC 24V output short circuit protection
Voltage Withstand1500VAC (Primary-secondary), 1500VAC (Primary-PE), 500VAC (Secondary-PE)
Insulation Resistance>5MΩ at 500VDC (between all I/O points and ground)
Noise ImmunityESD: 8kV Air Discharge
EFT: Power Line: 2kV, Digital I/O: 1kV, Analog & Communication I/O: 1kV
Damped-Oscillatory Wave: Power Line 1kV, Digital I/O: 1kV
RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m
GroundingThe diameter of grounding wire shall not be less than that of L, N terminal of the power supply.
(When many PLCs are in use at the same time, please make sure every PLC is properly grounded.)
EnvironmentOperation: 0°C~55°C (temperature), 5~95% (humidity), pollution degree 2
Storage: -25°C~70°C (temperature), 5~95% (humidity)
Vibration/Shock ResistanceInternational standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/ IEC61131-2 & IEC 68-2-27 (TEST Ea)
WeightSee below "Selection Table"

Selection Table

ModelNo. of Inputs
No. of Outputs
Output Type
Input/OutputWeight
DVP16EH00R388Relay2 counters of 200 kHz input500g
DVP16EH00T388Transistor2 counters of 200 kHz input
2 axes of 200 kHz output
480g
DVP20EH00R3128Relay2 counters of 200 kHz input,
1 counter of 20 kHz input
520g
DVP20EH00T3128Transistor2 counters of 200 kHz input,
2 axes of 200 kHz output
500g
DVP32EH00R31616Relay4 counters of 200 kHz input652g
DVP32EH00T31616Transistor4 counters of 200 kHz input,
4 axes of 200 kHz output
612g
DVP32EH00M31616Relay
Differenttial output
4 counters of 200 kHz input (Differenttial: 2 sets),
2 axes of 200 kHz output (Differenttial: 2 axes)
644g
DVP32EH00MT1616Transistor
Differenttial output
4 counters of 200 kHz input (Differenttial: 2 sets)
2 axes of 200 kHz output (Differenttial: 2 axes)
615g
DVP32EH00R3-L*1616Relay4 counters of 200 kHz input652g
DVP32EH00T3-L*1616Transistor4 counters of 200 kHz input
4 axes of 200 kHz output
612g
DVP40EH00R32416Relay4 counters of 200 kHz input710g
DVP40EH00T32416Transistor4 counters of 200 kHz input
4 axes of 200 kHz output
675g
DVP48EH00R32424Relay4 counters of 200 kHz input748g
DVP48EH00T32424Transistor4 counters of 200 kHz input
4 axes of 200 kHz output
688g
DVP64EH00R33232Relay4 counters of 200 kHz input836g
DVP64EH00T33232Transistor4 counters of 200 kHz input
4 axes of 200 kHz output
756g
DVP80EH00R34040Relay4 counters of 200 kHz input948g
DVP80EH00T34040Transistor4 counters of 200 kHz input
4 axes of 200 kHz output
848g

Note: * Supports high-speed extension (left-side).

PLC I/O Point Specification

Input Points
ItemTwo Differential Inputs (200kHz)24V DC Single Common Port Input
200kHz20kHz10kHzNormal Input
Input Wiring TypeIndependent wiringChange wiring from S/S to SINK or SOURCE
Input Voltage (±10%)5~24V DC24V DC
Input Point Configuration#1#2#3#4#5
Input Impedance4.7k Ohm3.3k Ohm4.7k Ohm
Active LevelOff → On>1mA (5V)>6mA (18.5V)>4mA (16.5V)
On → Off<0.4mA (2V)<2.2mA (8V)<1.5mA (8V)
Response Time #6Off → On<150ns<150ns<3.5μs<8μs<10ms
On → Off<3μs<3μs<20μs<60μs<20ms
#1. For DVP32EH00M3/MT, the bandwidth of the two differential input points X0, X1, X4, and X5 is 200kHz.
#2. The bandwidth of the input points X0, X1, X4, X5, X10, X11, X14, and X15 is 200kHz (excluding X10 and X11 on DVP20EH3).
#3. For DVP20EH00R3/T3, the bandwidth of the input points X10 and X11 is 20kHz.
#4. The bandwidth of the input points X2, X3, X6, X7, X12, X13, X16, and X17 is 10kHz.
#5. X20 and above on EH3 are normal input points.
#6. The filter times of X0~X7 and X10~X17 can be adjusted by D1020 and D1021 respectively within 0~60ms.
Output Points
ItemTwo Differential Outputs #1Single Common Port
Transistor Output
Single Common Port
Relay Output
High Speed #2Low Speed #3Normal Output #4
Max. Frequency200kHz200kHz10kHzLoad ON/OFF control
Minimum Load-2mA/DC power supply
Working Voltage5VDC5~30VDC<250VAC, 30VDC
InsulationLine driverPhoto coupler isolationMagnetic isolation
Maximum LoadResistive<25mA0.5A/1 point (4A/COM)2A/1 point (5A/COM)
Inductive-12W (24VDC)#5
Lamp-2W (24VDC)20WDC/100WAC
Max. Output Response Time0.2μs0.2μsOff → On: 20μs
On → Off: 30μs
10ms
Over-Current ProtectionN/A
#1. For DVP32EH00M3, the bandwidth of the differential output points Y0~Y3 is 200kHz, and the other output points are relay output points. For DVP32EH00MT, the bandwidth of the differential output points Y0~Y3 is 200kHz, and the other output points are transistor output points.
#2. For DVP40/48/64/80EH3, the bandwidth of the output points Y0~Y3, Y4 and Y6 is 200kHz. For DVP16/20EH3, the bandwidth of the output points Y0 and Y2 is 200kHz. For DVP32EH3, the bandwidth of the output points Y0, Y2, Y4, and Y6 is 200kHz.
#3. For DVP40/48/64/80EH3, the bandwidth of the output points Y5 and Y7 is 10kHz. For DVP16/20EH3, the bandwidth of the output points Y1 and Y3~Y7 is 10kHz. For DVP32EH3, the bandwidth of the output points Y1, Y3, Y5, and Y7 is 10kHz.
#4. Y10 and above on EH3 are normal output points.
#5. Life curves for relays
PLC Controller Life Curve

Dimensions (Unit: mm)

PLC Controller EH3 Series Dimensions

Model16EH00R/T320EH00R/T332EH00R/T332EH00M3/MT40EH00R/T348EH00R/T364EH00R/T380EH00R/T3
W113113143.5158.8158.8174212276
W1103103133.5153.8153.8164202266

DVP-EH3 Programmable Logic Controller (PLC) Features

1. High-performance Programmable Logic Controller (PLC) with large program capacity and data registers for more demanding and complex applications

  • Program capacity: 30 k steps
  • Data register: 12 k words
  • Execution speed: 4X

2. Excellent Motion Control

  • High-speed pulse output: 4 axes of 200kHz pulse output (DVP40/48/64/80EH00T3 ONLY)
  • Supports max. 4 hardware 200kHz high-speed counters
  • Various motion control instructions to achieve high-speed and high-precision positioning control for labeling machines, packaging machines, printing machines, etc.
  • Offers linear / arc interpolation motion control
  • Provides up to 16 external interrupt pointers

3. Complete Program Protection

  • Auto backup function to prevent programs and data loss even when the battery runs out
  • Secondary backup function saves an extra copy of programs and data to enhance program safety
  • Up to 4-level password protection to protect your source programs and intellectual property

4. Outstanding Operation Performance

  • 32-bit CPU + ASIC dual processors support floating point operations
  • Max. execution speed of basic instructions up to 0.24μs

5. Flexible Function Extension Modules & Cards

  • Multiple selections of extension modules and function cards: analog I/O, temperature measurement, additional single-axis motion control, high-speed counting
  • The 3rd serial communication port and Ethernet communication card are available.

6. PLC-Link

  • PLC Link allows the user to link up a max. 32 units to the network without installing extra communication extension modules.

Product reviews
I have to buy another programmable logic controller
5
Cabldwin
Avatar
8/25/2021 8:24 PM
I have used this programmable logic controller from ATO.com and it feels very easy to use. I want to buy another programmable logic controller and I would recommend it to everyone.
Was this review helpful? Yes No (0/0)
exceeded my expectations
5
Hank
Avatar
4/13/2022 2:26 AM
This is an amazing product! It exceeded my expectations! I bought it for my cutting machine, it's easu tu use and operating normally
Was this review helpful? Yes No (0/0)
very reliable programmable logic controller
4
Bianca007
Avatar
10/22/2025 7:52 PM
I've been using this programmable logic controller for a high-speed cutting machine, and it handles complex motion control flawlessly. The large program capacity is perfect for our demanding applications without any lag. The only minor issue is that the initial setup and wiring took a bit longer than expected. But once it's running, it's stable and efficient.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Auto Range Multimeter, True RMS, 1000V/20A DC

ATO-MLT-19B
$94.26
Low price smart digital multimeter for sale online. It is a multimeter tester designed for voltage/resistance/capacitance/resistance measurement. 1000V 20A auto range multimeter desired for beginner, with 5999 max display, diode testing, triode testing, NCV test, true RMS, data hold, low battery indication, overload protection, etc.

Wireless Temperature and Humidity Transmitter, WIFI Output

ATO-TAHT-AW5145W
$169.21
Temperature and humidity transmitter adopts capacitive type digital temperature and humidity sensor, wide measuring range, high accuracy, anti-interference ability, high-definition TFT color display, output 2.4G wireless WIFI signal. Wireless temperature and humidity transmitter can connect with various kinds of external temperature and humidity sensor for long distance testing.

Mini Industrial PC, Fan/Fanless, Intel i3/i5/i7, DDR5, 3 HDMI

ATO-IPC-N3322
$743.38
Buy fan/fanless industrial PC online. Selectable CPU Intel Core i3 1215U/ i5 1235U/ i7 1255U, usable system Linux/Windows 10/Windows 11, 1*DDR5 4800 SODIMM memory slot, max 32G, I/O interface 2*COM, 3*HDMI, 3*Intel i226-V 2.5G Lan, input voltage DC 12V. Industrial grade computer has mini size, embedded mounting, economic price.