Nema 23 Stepper Motor, 3 Phase, 5.3A, 0.9N·m

$85.95
Buy 3 phase Nema 23 bipolar stepper motor at low cost, 5.3A, holding torque at 0.9N·m, step angle 1.2 degree, 3 lead wires, motor length 54mm. This hybrid stepper motor with 8mm shaft size, is used in 3D printer, CNC machine, drawing equipment and sewing machine, robot arm, etc.
SKU: ATO-STEP-23M530
Free Shipping
Delivery date: 6-12 days

Industral 3 phase permanent magnet stepper motor with 3 lead wires is convenient to adjust the speed, long service life and low maintenance cost.

Physical Specification

  • Model Number: ATO-FY56TM530A
  • Flanged Size: 57 x 57mm (Nema 23)
  • Motor Length: 54mm
  • Shaft Diameter: 8mm
  • Number of Leads: 3 wire
  • Weight: 0.7kg

Electrical Specification

  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8°
  • Rated Current: 5.3A
  • Holding Torque: 0.9 N·m (90 N·cm, 127.5 Oz.in)
  • Phase Resistance: 0.35Ω
  • Phase Inductance: 1.1mH
  • Rotor Inertia: 300g·cm2

Dimensions (Unit: mm)

L=54mm

Dimensions of Nema 23 3 Phase Hybrid Stepper Motor

Wiring Diagram

Wiring Diagram of Nema 23 3 Phase Stepper Motor

Speed-Torque Curve Diagram

Speed Torque Curve Diagram of Nema 23 3 Phase Stepper Motor

Details

Nema 23 Stepper Motor 3Phase 0.9N·m-2.5N·m Details

Tips: Difference between unipolar stepper motor and bipolar stepper motor

The bipolar stepper motor uses eight transistors to drive two sets of phases. The number of transistors in a bipolar motor drive circuit is twice that of a unipolar drive circuit. The four lower-end transistors are usually directly driven by a microcontroller, and the upper-end transistors require a higher-cost upper-end drive circuit.

The main difference between a high torque unipolar stepper motor and a bipolar stepper motor is the connection. The motor structure of the unipolar drive circuit contains two sets of coils with middle taps, and the whole motor has a total of six wires connected to the outside world. The bipolar drive circuit can drive a four-wire or six-wire motor at the same time. Although a four-wire motor can only use a bipolar drive circuit, it can greatly reduce the cost of mass production applications.

In addition, they are also different in voltage. The transistors of the bipolar drive circuit only need to bear the motor voltage, while the unipolar drive circuit needs a clamp circuit to drive.

How to control a stepper motor using a PLC and HMI?
This video shows you how to configure a PLC, HMI, motor driver, and proximity sensor to perform Origin Return (OPR) control of a stepper motor.

Common Stepper Motor Troubleshooting Problems and Tips
In this video, 9 common problems that can occur with stepper motors are discussed, and expert advice is provided for diagnosing and effectively resolving these problems. If you have ever experienced problems with your stepper motor or want to be prepared for any future problems, this video is a must watch.

Controlling Stepper Motors with HMI and PLC for Fixed Cycle Power Delivery
In this video, we explore the step-by-step process of configuring an HMI and PLC to synchronize and manage specific cycle lengths of stepper motors, ensuring accurate power delivery.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

In the case of non-overload, the speed and stop position of the motor only depend on the frequency and pulse number of the pulse signal, and are not affected by the load change. That is, when a pulse signal is added to the motor, the motor rotates through a step angle. The existence of this linear relationship, coupled with the characteristics of the stepper motor having only periodic errors and no cumulative errors. This makes it very simple to use stepper motors to control the speed, position and other control fields.

Warranty

360 Days warranty

Thank you for buying industrial automation products on ATO.com, all products sold by ATO and the partner cover a 360-days-warranty, effective from the date of receiving the products.

What is covered?

ATO is responsible for providing free spare parts, free technical support to assist the customer to repair the defective products until the problem is solved.

What is not covered?

  • Product purchased from anyone other than ATO store or a ATO authorized reseller.
  • Expendable parts.
  • Routine cleaning or normal cosmetic and mechanical wear.
  • Damage from misuse, abuse or neglect.
  • Damage from use of parts other than ATO approved.
  • Damage from use outside the product’s usage or storage parameters.
  • Damage from use of parts not sold by ATO.
  • Damage from modification or incorporation into other products.
  • Damage from repair or replacement of warranted parts by a service provider other than a ATO authorized service provider.
  • Damage caused by the application environment not meeting the product usage requirements and the failure to perform preventive maintenance.
Product reviews
Would easily buy from again.
5
Jasper
Avatar
3/23/2022 11:53 PM
I bought 4 Nema 23 stepper motors for my large format printer, and they work well. Comes with quality cables. Good price, arrived on time, performs as expected. Would easily buy from again.
Was this review helpful? Yes No (0/0)
Nice power quality stepper motor.
5
Donald
Avatar
7/27/2022 8:18 PM
These are nice power quality stepper motors and I have ran these for about 200 hours now on my CNC machine. They have never skipped a beat. Great Nema 23 stepper motor for the price.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Industral 3 phase permanent magnet stepper motor with 3 lead wires is convenient to adjust the speed, long service life and low maintenance cost.

Physical Specification

  • Model Number: ATO-FY56TM530A
  • Flanged Size: 57 x 57mm (Nema 23)
  • Motor Length: 54mm
  • Shaft Diameter: 8mm
  • Number of Leads: 3 wire
  • Weight: 0.7kg

Electrical Specification

  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8°
  • Rated Current: 5.3A
  • Holding Torque: 0.9 N·m (90 N·cm, 127.5 Oz.in)
  • Phase Resistance: 0.35Ω
  • Phase Inductance: 1.1mH
  • Rotor Inertia: 300g·cm2

Dimensions (Unit: mm)

L=54mm

Dimensions of Nema 23 3 Phase Hybrid Stepper Motor

Wiring Diagram

Wiring Diagram of Nema 23 3 Phase Stepper Motor

Speed-Torque Curve Diagram

Speed Torque Curve Diagram of Nema 23 3 Phase Stepper Motor

Details

Nema 23 Stepper Motor 3Phase 0.9N·m-2.5N·m Details

Tips: Difference between unipolar stepper motor and bipolar stepper motor

The bipolar stepper motor uses eight transistors to drive two sets of phases. The number of transistors in a bipolar motor drive circuit is twice that of a unipolar drive circuit. The four lower-end transistors are usually directly driven by a microcontroller, and the upper-end transistors require a higher-cost upper-end drive circuit.

The main difference between a high torque unipolar stepper motor and a bipolar stepper motor is the connection. The motor structure of the unipolar drive circuit contains two sets of coils with middle taps, and the whole motor has a total of six wires connected to the outside world. The bipolar drive circuit can drive a four-wire or six-wire motor at the same time. Although a four-wire motor can only use a bipolar drive circuit, it can greatly reduce the cost of mass production applications.

In addition, they are also different in voltage. The transistors of the bipolar drive circuit only need to bear the motor voltage, while the unipolar drive circuit needs a clamp circuit to drive.

Product reviews
Would easily buy from again.
5
Jasper
Avatar
3/23/2022 11:53 PM
I bought 4 Nema 23 stepper motors for my large format printer, and they work well. Comes with quality cables. Good price, arrived on time, performs as expected. Would easily buy from again.
Was this review helpful? Yes No (0/0)
Nice power quality stepper motor.
5
Donald
Avatar
7/27/2022 8:18 PM
These are nice power quality stepper motors and I have ran these for about 200 hours now on my CNC machine. They have never skipped a beat. Great Nema 23 stepper motor for the price.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Nema 34 Stepper Motor, 3 Phase, 2A, 4N·m

ATO-STEP-34M200
$179.84
3 phase 3 wire hybrid stepper motor can be used in bipolar mode, with high holding torque of 4N·m and a step accuracy of ±5%. High precision Nema 34 stepper motor has 1.2 degree step angle and draws current of 2 amps.

Digital Stepper Motor Driver, 3 phase, AC 90V ~ 230V

ATO-STEP-M2205T
$211.29
Digital stepper motor driver works at AC 90V ~ 230V power supply, adjustable drive current 2.2A ~ 4.8A, which is capable of driving Nema 34 three phase hybrid stepper motors. A stepper controller and a bipolar stepper motor can form a stepper system for CNC machine and 3D printer.