Nema 23 Stepper Motor, 2 Phase, 3A, 1.5N·m

$97.89
Favorable price Nema 23 57 x 57 stepper motor, rated current 3A, holding torque 1.5N·m, 2 phase 4 lead wires, step angle 1.8 degree, accuracy ±5% at full step, motor length 76mm, compact size and lightweight, optional shaft diameter 8mm or 6.35mm.
SKU: ATO-STEP-23L300
*
Free Shipping
Delivery date: 6-12 days

Nema 23 bipolar stepper motor is a four wire connection motor with encoder, wire colors of black, green, red and blue, holding torque at 1.5N·m, working at -20℃~+50℃, high torque and high precision. It is used in CNC machine, drawing equipment and sewing machine, robot arm, 3D printer and so on. This permanent magnet stepper motor can be controlled by a voltage of DC 24V ~ 50V or AC 20V ~ 40V digital stepper driver for precise position control.

Physical Specification

  • Model Number: ATO-FY56EL300A
  • Matched the Driver Model: ATO-FYDM504T
  • Flanged Size: 57 x 57mm (Nema 23)
  • Motor Length: 76mm
  • Shaft Diameter: 8mm/ 6.35mm
  • Number of Leads: 4 wire
  • Weight: 1kg

Electrical Specification

  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8°
  • Rated Current: 3A
  • Holding Torque: 1.5 N·m (150 N·cm, 212.5 Oz.in)
  • Phase Resistance: 1Ω
  • Phase Inductance: 3.5mH
  • Rotor Inertia: 460g·cm2

Dimensions (Unit: mm)

L=76mm

Dimensions of Nema 23 2 Phase Hybrid Stepper Motor

Wiring Diagram

Wiring Diagram of Nema 23 2 Phase Stepper Motor

Speed-Torque Curve Diagram

Speed Torque Curve Diagram of Nema 23 2 Phase Hybrid Stepper Motor

Details

Nema 23 Stepper Motor 2 Phase 0.43N·m-3N·m Details

Tips: Stepper motor lost and out of step

Electric motor misalignment means out of step, and out of step is divided into lost step and overstep. When the stepper motor is working normally, it moves a step angle every time it receives a control pulse, that is, one step forward. If the control pulse is continuously input, the motor will continuously rotate accordingly. When the motor loses steps, the number of steps the rotor advances is less than the number of pulses; when the motor generates oversteps, the number of steps the rotor advances will be significantly more than the number of pulses.

If the stepper motor is improperly selected, the motor torque is not enough or the inertia of the object movement exceeds the motor's self-locking force, it will cause loss step or out of step. Or the driver selection is improper, and the matching driver current is too small, which affects the normal operation of the motor. The rated current of the stepper motor driver should be greater than 1.2 to 1.5 times the rated current of the motor.

How to control a stepper motor using a PLC and HMI?
This video shows you how to configure a PLC, HMI, motor driver, and proximity sensor to perform Origin Return (OPR) control of a stepper motor.

Common Stepper Motor Troubleshooting Problems and Tips
In this video, 9 common problems that can occur with stepper motors are discussed, and expert advice is provided for diagnosing and effectively resolving these problems. If you have ever experienced problems with your stepper motor or want to be prepared for any future problems, this video is a must watch.

Controlling Stepper Motors with HMI and PLC for Fixed Cycle Power Delivery
In this video, we explore the step-by-step process of configuring an HMI and PLC to synchronize and manage specific cycle lengths of stepper motors, ensuring accurate power delivery.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

In the case of non-overload, the speed and stop position of the motor only depend on the frequency and pulse number of the pulse signal, and are not affected by the load change. That is, when a pulse signal is added to the motor, the motor rotates through a step angle. The existence of this linear relationship, coupled with the characteristics of the stepper motor having only periodic errors and no cumulative errors. This makes it very simple to use stepper motors to control the speed, position and other control fields.

Warranty

360 Days warranty

Thank you for buying industrial automation products on ATO.com, all products sold by ATO and the partner cover a 360-days-warranty, effective from the date of receiving the products.

What is covered?

ATO is responsible for providing free spare parts, free technical support to assist the customer to repair the defective products until the problem is solved.

What is not covered?

  • Product purchased from anyone other than ATO store or a ATO authorized reseller.
  • Expendable parts.
  • Routine cleaning or normal cosmetic and mechanical wear.
  • Damage from misuse, abuse or neglect.
  • Damage from use of parts other than ATO approved.
  • Damage from use outside the product’s usage or storage parameters.
  • Damage from use of parts not sold by ATO.
  • Damage from modification or incorporation into other products.
  • Damage from repair or replacement of warranted parts by a service provider other than a ATO authorized service provider.
  • Damage caused by the application environment not meeting the product usage requirements and the failure to perform preventive maintenance.
Product reviews
Exactly what I needed.
5
David
Avatar
3/10/2022 7:00 PM
This 3A stepper motor performs very well for my application and exceeded my expectations. I got three and they all work excellent.
Was this review helpful? Yes No (0/0)
This stepper motor works as expected.
5
Paris
Avatar
6/29/2022 2:14 AM
This Nema 23 2 phase stepper motor works greater than my old one. This is actually quitter than the original and appears to provide a nice, smooth, calibrated step. Highly recommend.
Was this review helpful? Yes No (0/0)
Just what I expected.
5
Jaydon
Avatar
7/27/2022 7:56 PM
Good quality Nema 23 stepper motor already ordered before, works nice and smoothly for my CNC router. Fast shipping, and just what I expected. Highly recommend.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Nema 23 bipolar stepper motor is a four wire connection motor with encoder, wire colors of black, green, red and blue, holding torque at 1.5N·m, working at -20℃~+50℃, high torque and high precision. It is used in CNC machine, drawing equipment and sewing machine, robot arm, 3D printer and so on. This permanent magnet stepper motor can be controlled by a voltage of DC 24V ~ 50V or AC 20V ~ 40V digital stepper driver for precise position control.

Physical Specification

  • Model Number: ATO-FY56EL300A
  • Matched the Driver Model: ATO-FYDM504T
  • Flanged Size: 57 x 57mm (Nema 23)
  • Motor Length: 76mm
  • Shaft Diameter: 8mm/ 6.35mm
  • Number of Leads: 4 wire
  • Weight: 1kg

Electrical Specification

  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8°
  • Rated Current: 3A
  • Holding Torque: 1.5 N·m (150 N·cm, 212.5 Oz.in)
  • Phase Resistance: 1Ω
  • Phase Inductance: 3.5mH
  • Rotor Inertia: 460g·cm2

Dimensions (Unit: mm)

L=76mm

Dimensions of Nema 23 2 Phase Hybrid Stepper Motor

Wiring Diagram

Wiring Diagram of Nema 23 2 Phase Stepper Motor

Speed-Torque Curve Diagram

Speed Torque Curve Diagram of Nema 23 2 Phase Hybrid Stepper Motor

Details

Nema 23 Stepper Motor 2 Phase 0.43N·m-3N·m Details

Tips: Stepper motor lost and out of step

Electric motor misalignment means out of step, and out of step is divided into lost step and overstep. When the stepper motor is working normally, it moves a step angle every time it receives a control pulse, that is, one step forward. If the control pulse is continuously input, the motor will continuously rotate accordingly. When the motor loses steps, the number of steps the rotor advances is less than the number of pulses; when the motor generates oversteps, the number of steps the rotor advances will be significantly more than the number of pulses.

If the stepper motor is improperly selected, the motor torque is not enough or the inertia of the object movement exceeds the motor's self-locking force, it will cause loss step or out of step. Or the driver selection is improper, and the matching driver current is too small, which affects the normal operation of the motor. The rated current of the stepper motor driver should be greater than 1.2 to 1.5 times the rated current of the motor.

Product reviews
Exactly what I needed.
5
David
Avatar
3/10/2022 7:00 PM
This 3A stepper motor performs very well for my application and exceeded my expectations. I got three and they all work excellent.
Was this review helpful? Yes No (0/0)
This stepper motor works as expected.
5
Paris
Avatar
6/29/2022 2:14 AM
This Nema 23 2 phase stepper motor works greater than my old one. This is actually quitter than the original and appears to provide a nice, smooth, calibrated step. Highly recommend.
Was this review helpful? Yes No (0/0)
Just what I expected.
5
Jaydon
Avatar
7/27/2022 7:56 PM
Good quality Nema 23 stepper motor already ordered before, works nice and smoothly for my CNC router. Fast shipping, and just what I expected. Highly recommend.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews