Nema 23 Closed Loop Stepper Motor, 2 Phase, 5.2A, 3N·m

$152.97
Low price Nema 23 (57 x 57mm) hybrid bipolar stepper motor for sale, closed loop performance, flanged size, two phase 4 lead wires, 5.2A, step angle 1.8 degree, holding torque at 3N·m. This permanent magnet stepper motor is used for 3D printer, robot arm and CNC router, high efficiency and low vibration.
SKU: ATO-STEP-23D520
Free Shipping
Delivery date: 6-12 days

High torque and high precision bipolar stepper motor online sale, holding torque at 3 N·m, motor length 123mm, 8mm shaft size, perfect for CNC machine, sewing machine and other electric equipment.

Physical Specification

  • Model Number: ATO-FY56ED520BC1
  • Matched the Driver Model: ATO-FYDB506T
  • Flanged Size: 57 x 57mm (Nema 23)
  • Motor Length: 123mm
  • Shaft Diameter: 8mm
  • Number of Leads: 4 wire
  • Weight: 1.4kg

Electrical Specification

  • Motor Type: Bipolar Closed Loop Stepper
  • Step Angle: 1.8°
  • Rated Current: 5.2A
  • Holding Torque: 3 N·m (300 N·cm, 425 Oz.in)
  • Phase Resistance: 0.45Ω
  • Phase Inductance: 2.3mH
  • Rotor Inertia: 720g·cm2

Dimensions (Unit: mm)

L=123mm

Dimensions of Nema 23 2 Phase Closed Loop Stepper Motor

Motor & Encoder Wiring Diagram

Wiring Diagram of Nema 23 2 Phase Closed Loop Stepper Motor

Speed-Torque Curve Diagram

Speed Torque Curve Diagram of Nema 23 2 Phase Closed Loop Stepper Motor

Details

Details of Nema 23 closed loop stepper motor

Tips: How does the stepper motor measure the output current?

When the stepper motor is running continuously, you can see the effective value of the current in one of the phase lines with the current gear of the multimeter. For example, string a resistance of 1 Ω in the phase line, use an oscilloscope to see the waveform at both ends of the resistance, the highest value on the oscilloscope is the peak current.

The rated current of the stepping motor refers to the maximum current that is allowed to pass for a long time when the heating does not exceed the long-term heating allowable temperature under the reference ambient temperature and the rated voltage working condition. The ambient temperature has a great influence on the maximum current allowed to pass for a long time, because the ambient temperature of the device installation location and the reference ambient temperature are not necessarily the same.

Generally, when the electrical equipment is working at an ambient temperature higher than 40 degrees Celsius, it is recommended to reduce the rated current by 1.8% for each increase in the ambient temperature by 1 degree. When the working environment temperature is lower than 40 degrees, the ambient temperature will decrease by 1 degree per degree. , It is recommended to increase the rated current by 0.5%, but the maximum should not exceed 20% of the rated current.

How to control a stepper motor using a PLC and HMI?
This video shows you how to configure a PLC, HMI, motor driver, and proximity sensor to perform Origin Return (OPR) control of a stepper motor.

Common Stepper Motor Troubleshooting Problems and Tips
In this video, 9 common problems that can occur with stepper motors are discussed, and expert advice is provided for diagnosing and effectively resolving these problems. If you have ever experienced problems with your stepper motor or want to be prepared for any future problems, this video is a must watch.

Controlling Stepper Motors with HMI and PLC for Fixed Cycle Power Delivery
In this video, we explore the step-by-step process of configuring an HMI and PLC to synchronize and manage specific cycle lengths of stepper motors, ensuring accurate power delivery.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

In the case of non-overload, the speed and stop position of the motor only depend on the frequency and pulse number of the pulse signal, and are not affected by the load change. That is, when a pulse signal is added to the motor, the motor rotates through a step angle. The existence of this linear relationship, coupled with the characteristics of the stepper motor having only periodic errors and no cumulative errors. This makes it very simple to use stepper motors to control the speed, position and other control fields.

Warranty

360 Days warranty

Thank you for buying industrial automation products on ATO.com, all products sold by ATO and the partner cover a 360-days-warranty, effective from the date of receiving the products.

What is covered?

ATO is responsible for providing free spare parts, free technical support to assist the customer to repair the defective products until the problem is solved.

What is not covered?

  • Product purchased from anyone other than ATO store or a ATO authorized reseller.
  • Expendable parts.
  • Routine cleaning or normal cosmetic and mechanical wear.
  • Damage from misuse, abuse or neglect.
  • Damage from use of parts other than ATO approved.
  • Damage from use outside the product’s usage or storage parameters.
  • Damage from use of parts not sold by ATO.
  • Damage from modification or incorporation into other products.
  • Damage from repair or replacement of warranted parts by a service provider other than a ATO authorized service provider.
  • Damage caused by the application environment not meeting the product usage requirements and the failure to perform preventive maintenance.
Product reviews
It was an excellent purchase.
5
Tambor
Avatar
3/16/2022 8:49 PM
I bought 4 closed loop hybrid stepper motors from ATO, and they fit the standard Nema 23 dimension. These stepping motor are well made at good price. It was an excellent purchase.
Was this review helpful? Yes No (0/0)
Great stepper motor.
5
Richard
Avatar
6/29/2022 1:18 AM
This closed loop stepper motor is as described. It functions well overall and pin connections were good. I installed it on my 3D printer and have found no issues with it. I am glad with this purchase and will buy more.
Was this review helpful? Yes No (0/0)
Nice and strong.
5
Seaman
Avatar
7/27/2022 12:52 AM
Great price and quality, nice and strong. I used this closed loop Nema 23 stepper motor for my CNC machine, it works great, good repeatability and excellent holding power. Highly recommend.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

High torque and high precision bipolar stepper motor online sale, holding torque at 3 N·m, motor length 123mm, 8mm shaft size, perfect for CNC machine, sewing machine and other electric equipment.

Physical Specification

  • Model Number: ATO-FY56ED520BC1
  • Matched the Driver Model: ATO-FYDB506T
  • Flanged Size: 57 x 57mm (Nema 23)
  • Motor Length: 123mm
  • Shaft Diameter: 8mm
  • Number of Leads: 4 wire
  • Weight: 1.4kg

Electrical Specification

  • Motor Type: Bipolar Closed Loop Stepper
  • Step Angle: 1.8°
  • Rated Current: 5.2A
  • Holding Torque: 3 N·m (300 N·cm, 425 Oz.in)
  • Phase Resistance: 0.45Ω
  • Phase Inductance: 2.3mH
  • Rotor Inertia: 720g·cm2

Dimensions (Unit: mm)

L=123mm

Dimensions of Nema 23 2 Phase Closed Loop Stepper Motor

Motor & Encoder Wiring Diagram

Wiring Diagram of Nema 23 2 Phase Closed Loop Stepper Motor

Speed-Torque Curve Diagram

Speed Torque Curve Diagram of Nema 23 2 Phase Closed Loop Stepper Motor

Details

Details of Nema 23 closed loop stepper motor

Tips: How does the stepper motor measure the output current?

When the stepper motor is running continuously, you can see the effective value of the current in one of the phase lines with the current gear of the multimeter. For example, string a resistance of 1 Ω in the phase line, use an oscilloscope to see the waveform at both ends of the resistance, the highest value on the oscilloscope is the peak current.

The rated current of the stepping motor refers to the maximum current that is allowed to pass for a long time when the heating does not exceed the long-term heating allowable temperature under the reference ambient temperature and the rated voltage working condition. The ambient temperature has a great influence on the maximum current allowed to pass for a long time, because the ambient temperature of the device installation location and the reference ambient temperature are not necessarily the same.

Generally, when the electrical equipment is working at an ambient temperature higher than 40 degrees Celsius, it is recommended to reduce the rated current by 1.8% for each increase in the ambient temperature by 1 degree. When the working environment temperature is lower than 40 degrees, the ambient temperature will decrease by 1 degree per degree. , It is recommended to increase the rated current by 0.5%, but the maximum should not exceed 20% of the rated current.

Product reviews
It was an excellent purchase.
5
Tambor
Avatar
3/16/2022 8:49 PM
I bought 4 closed loop hybrid stepper motors from ATO, and they fit the standard Nema 23 dimension. These stepping motor are well made at good price. It was an excellent purchase.
Was this review helpful? Yes No (0/0)
Great stepper motor.
5
Richard
Avatar
6/29/2022 1:18 AM
This closed loop stepper motor is as described. It functions well overall and pin connections were good. I installed it on my 3D printer and have found no issues with it. I am glad with this purchase and will buy more.
Was this review helpful? Yes No (0/0)
Nice and strong.
5
Seaman
Avatar
7/27/2022 12:52 AM
Great price and quality, nice and strong. I used this closed loop Nema 23 stepper motor for my CNC machine, it works great, good repeatability and excellent holding power. Highly recommend.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews