Level Sensor

ATO Level Sensor Selection Guide

Choosing the right level sensor depends on several key factors, including the type of measured medium, required measuring range, monitoring mode, working conditions, installation method, and compatible output signal.
ATO offers a wide range of level sensors, including capacitive, submersible, ultrasonic, radar, optical, tuning fork, and rotary paddle types. Each technology is designed to meet different application needs and environmental conditions.
These sensors are widely used in industrial storage tanks, water treatment systems, chemical processing, grain silos, hydraulic systems, and various liquid or solid level monitoring applications. Proper selection helps ensure accurate measurement, stable operation, and reliable long-term performance.

Quick ATO Level Sensor Selection Table

This table helps users compare ATO level sensors by different output options, including 4–20mA, 0–5V, 0–10V, RS485 Modbus, and switch signals. Selecting the appropriate output type ensures accurate measurement, stable performance, and reliable process monitoring across a wide range of industrial applications.

Capacitive Level Sensor
Capacitive level sensors detect the liquid level by measuring changes in capacitance between the sensor plates. When the liquid replaces air between the plates, the capacitance changes, reflecting the liquid height in the tank. They are compact, accurate, and cost-effective.

Model SKUMeasuring RangeWorking TempPower SupplyOutput Signal Best For
ATO-LEVS-9000–900 mm-40°C~+85°C15–30V DC4–20mA / RS485 / RS232 / 0–5VRivers, reservoirs, and power plants
ATO-LEVS-10000–1000 mm-20°C~+85°C9–30V DC / 15–30V DC4–20mA / RS485 / RS232Industrial oil and gas tanks
ATO-LEVS-20000–2000 mm-50°C~+200°C9–30V DC / 15–30V DC4–20mA / 0–10VDiesel/gas fuel tanks for generators
ATO-LEVS-GLTV7S100–1400 mm-35°C~+70°C9–30V DC4–20mA / RS485 / RS232 / 0–5VHydraulic systems, machinery,
fluid monitoring


Submersible Level Sensor
Measures the liquid level by detecting hydrostatic pressure when submerged in the liquid. Ideal for deep tanks, water treatment, chemical storage, and sealed containers. Provides continuous and reliable measurement, resistant to harsh conditions.

Model SKUMeasuring RangeWorking TempPower SupplyOutput Signal Best For
ATO-LEVS-S200M0–200 m0°C~+60°C12–24V DC4–20mA / RS485 / 0–5VWater level monitoring in wells,
tanks and reservoirs
ATO-LEVS-CYW710–200 kPa-40°C~+85°C9–28V DC4–20mA / RS485Acid and alkali liquid level detection
in corrosive environments
ATO-LEVS-HT20M0–20 m-20°C~+85°C12–24V DC0–20mA / 4–20mA / 0–5V / 0–10VHigh-temperature liquid level monitoring of industrial tanks


Ultrasonic Level Sensor
Uses ultrasonic waves to measure the distance to the liquid surface. Non-contact design is safe for corrosive or hazardous liquids. Suitable for large tanks, wastewater, and industrial chemical storage.

Model SKUMeasuring RangeWorking TempPower SupplyOutput Signal Best For
ATO-LEVS-050–5 m-20°C ~ +60°C12V DC / 24V AC4–20mAReservoirs, chemical containers
ATO-LEVS-U40M0–40 m-20°C ~ +60°C12–16V DC / 24–28V DC / 220V AC4–20mA / RS485 / HARTRivers, sewage tanks, outlet systems
ATO-LEVS-U60M0–60 m-20°C ~ +80°C12V DC / 24V AC4–20mA / RS485 / RS232Diesel, oil, mixed liquid tanks
ATO-LEVS-NC0–20 m-40°C ~ +80°C24V DC4–20mAAcid-alkali liquids, wells


Rotary Paddle Level Switch
A rotating paddle stops when it is obstructed by solids, triggering a switch. Commonly used in silos, hoppers, and bulk solid storage. Ideal for point-level detection to prevent overfill or empty conditions.

Model SKUMeasuring RangeWorking TempPower SupplyOutput Signal Best For
ATO-LEVS-RD9010–10 m-40°C ~ +150°C12–24V DC / 220V AC4–20mA / RS485 / HARTCorrosive liquids, chemical, and storage systems
ATO-LEVS-RD9020–30 m-40°C ~ +250°C12–24V DC / 220V AC4–20mA / RS485 / HARTHigh-temperature and high-pressure industrial liquids
ATO-LEVS-RD9030–40 m-40°C ~ +130°C / -40°C ~ +230°C12–24V DC / 220V AC4–20mA / RS485 / HARTBulk material level monitoring, solids, industrial raw materials
ATO-LEVS-RD9090–70 m-40°C ~ +150°C12–24V DC / 220V AC / 50Hz4–20mA / RS485 / RS232 / HARTWater level in reservoirs, lakes, and industrial tanks


Optical Level Sensor
Optical level sensors detect liquid presence using light reflection or refraction. They are compact with a fast response, suitable for point-level detection in small tanks, laboratory instruments, and medical liquid monitoring.

Model SKUMaterialMeasuring TempPower SupplyOutput SignalBest For
ATO-MR-M12PSU-20°C ~ +110°C5–24V DCNPN/PNPOil, coolant, hydraulics – low-level run-dry protection


Electromagnetic (Radar) Level Switch
Electromagnetic radar level switches use microwave signals to detect the presence or absence of liquid. They work reliably in harsh conditions, including vapor or dust, and are ideal for high-pressure or high-temperature industrial tanks.

Model SKUMaterialMeasuring TempPower SupplyOutput SignalBest For
ATO-ELS-040SUS304 / 316L+PTFE-20°C ~ +200°C24V DC / 220V ACSPDTConductive liquids – industrial control


Vibrating (Tuning Fork) Level Switch
Vibrating tuning fork level switches detect liquids or solids by a frequency change when the vibrating element is covered. They are reliable, work with foam, sticky liquids, or powders, and are suitable for silos, hoppers, and point-level detection to prevent overfill.

Model SKUMaterialMeasuring TempPower SupplyOutput SignalBest For
ATO-TFLS-501Stainless Steel 316-40°C ~ +80°C24V DC / 220V ACDPDTConductive liquids – industrial control
ATO-VLS-YN100Stainless Steel 316-30°C ~ +200°C250V AC / 30V DC / 5ASPDTPowders, granules, bulk solids – silos/bins


Rotary Paddle Level Switch
Rotary paddle level switches have a rotating paddle that stops when obstructed by solids, triggering a switch. They are commonly used in silos, hoppers, and bulk solid storage and are ideal for point-level detection to signal full or empty conditions.

Model SKUMaterialMeasuring TempPower SupplyOutput SignalBest For
ATO-PLS-004SUS304 Stainless Steel-20°C ~ +80°C220V AC / 110V AC / 24V DCSPDTBulk solids – bins, hoppers, silos


Key Considerations in Selecting ATO Level Sensors

To select the most suitable ATO level sensor for industrial level measurement, follow a structured decision process based on medium, measurement method, environment, and system requirements.

Step 1: Identify the Measured Medium
Determine the type and physical properties of the measured material.
Common media types include:

  • Liquids (water, oil, chemicals)
  • Slurries or sludge
  • Powders or granular solids
    Key properties affecting selection: viscosity, density, conductivity, and corrosiveness.

Step 2: Determine Measurement Type
Select the required measurement mode based on application needs.

  • Continuous Level Measurement: Provides real-time level monitoring (0–100%) for process control.
  • Point Level Detection: Provides ON/OFF switching output for alarm, pump control, or overflow protection.

Step 3: Select Contact or Non-Contact Technology
Choose sensor type according to application conditions and medium characteristics.

  • Capacitive Sensors: Suitable for general liquid level detection
  • Submersible Sensors: Hydrostatic pressure-based measurement for deep or sealed tanks
  • Ultrasonic Sensors: Non-contact measurement for large tanks or corrosive media
  • Radar Sensors: High-precision measurement in high temperature, high pressure, vapor, or dust environments
  • Optical Sensors: Compact detection for small equipment and low-level protection
  • Tuning Fork Switches: Point-level detection for viscous, foam, or powder media
  • Rotary Paddle Switches: Bulk solid level detection in silos and hoppers

Step 4: Evaluate Operating Environment
Assess installation and process conditions, including:

  • Temperature range
  • Pressure conditions
  • Presence of vapor, foam, or dust
  • Tank geometry and installation constraints
    Harsh industrial environments typically require radar or pressure-based sensing technologies for stable operation.

Step 5: Confirm Output Signal and System Integration
Ensure compatibility between sensor output and control system requirements.
Common output types:

  • 4–20mA analog signal
  • 0–5V / 0–10V voltage signal
  • RS485 Modbus communication
  • Relay/switch output
  • Wireless transmission (optional)
    Integration targets: PLC, SCADA, DCS, and IoT-based control systems.

Industrial Application-Based ATO Level Sensor Selection Guide

Based on the above criteria, select the most suitable ATO level sensor according to different industrial scenarios.

For Conventional Water & Oil Storage
If you monitor regular water reservoirs, river water, or conventional oil storage tanks, choose stable and cost-effective capacitive level sensors.

  • Recommended Models: ATO-LEVS-900, ATO-LEVS-1000, ATO-LEVS-2000
  • Best for: Power plant water monitoring, industrial oil tanks, and generator fuel tanks with wide temperature adaptability and multi-signal output options.

For Deep Liquid & Sealed Container Detection
For deep wells, large sealed tanks, and corrosive liquid storage, select pressure-based submersible level sensors with strong environmental adaptability.

  • Recommended Models: ATO-LEVS-S200M, ATO-LEVS-CYW71, ATO-LEVS-HT20M
  • Best for: Deep water level monitoring, high-temperature liquids, and acid-base corrosive environments under harsh sealed conditions.

For Non-contact Large Tank Monitoring
Choose non-contact ultrasonic level sensors for hazardous, corrosive, or large-capacity chemical containers where direct medium contact is not suitable.

  • Recommended Models: ATO-LEVS-05, ATO-LEVS-U40M, ATO-LEVS-U60M
  • Best for: Sewage tanks, river channels, chemical storage, and mixed liquid systems requiring safe non-contact measurement.

For Bulk Solid & Granular Material
Use rotary paddle level switches for silos, hoppers, and bulk material storage to prevent overflow or material shortage.

  • Recommended Models: ATO-LEVS-RD903, ATO-PLS-004
  • Best for: Grain, powder, and bulk solid storage with reliable point-level alarm and anti-blocking performance.

For Foamy & Viscous Medium Detection 
Select tuning fork level sensors for sticky liquids, foam, and powder-like materials with stable frequency-based detection.

  • Recommended Models: ATO-TFLS-501, ATO-VLS-YN100
  • Best for: Industrial liquid tanks, powder silos, and overflow protection with strong anti-interference capability.

For High Pressure & Severe Industrial Conditions
Radar level sensors are suitable for high temperature, high pressure, vapor, and dusty industrial environments with stable microwave measurement performance.

  • Recommended Models: ATO-ELS-040
  • Best for: Harsh industrial tank monitoring, conductive liquid measurement, and complex vapor-filled conditions.

For Mini Equipment & Precision Liquid Protection
Compact optical level sensors are ideal for small machinery, laboratory equipment, and low-level liquid protection applications.

  • Recommended Models: ATO-MR-M12
  • Best for: Hydraulic systems, coolant monitoring, and compact equipment liquid level safety with a fast response time.

Level sensors application

Quick Recommendation by Application

There are various types of level sensors designed for different applications and characteristics. Select the most suitable ATO level sensor type and model based on your specific industrial application to ensure accurate measurement and reliable control.

ApplicationRecommended Sensor TypeRecommended SKU
Liquid level detection of water, oil, and chemicalsCapacitive / Ultrasonic Level SensorATO-LEVS-900 / ATO-LEVS-1000 / ATO-LEVS-U40M
Liquid level detection and control at multiple pointsElectrode Level SwitchATO-ELS-040
Slurry, powder, or bulk solid level monitoringVibrating / Rotary Paddle Level SwitchATO-VLS-YN100 / ATO-PLS-004
Slurry level in tanks or containersUltrasonic / Submersible SensorATO-LEVS-CS03 / ATO-LEVS-S200M
Conductive liquids (water, acid, alkali)Electrode Level SwitchATO-ELS-040 / ATO-LEVS-CYW71


Summary

Level sensors play a crucial role in modern industry and daily life, improving production efficiency, reducing costs, and ensuring safe operation.
Some level sensor applications can overlap, and when deciding on a sensor, it is important to identify the product that you are sensing and the type of feedback that your application requires. Sensors like tuning fork or optical level sensors can be used to indicate a high or low level. Ultrasonic and radar level sensors can measure your level to give specific feedback on how much product is in a tank. If you have any questions about purchasing, you can contact us.

View as Grid List
Sort by
Display per page

Digital Laser Radar Level Meter, 4–20mA, Stainless Steel

ATO-LEVS-AP16007
$2,514.37
Digital laser level meter for sale online with digital LCD display. The radar level meter with G1.5/ DN50 connection size for selection, 304/ 316 stainless steel material can be chosen. Electronic laser level meter with 0.02m~100m wide range measuring distance. The laser radar level meter features a 4–20mA analog output and a protection grade of IP67 for level measurement in harsh environments and is used in industries such as pharmaceutical production, environmental protection, and recycling.

Guided Wave Radar Level Transmitter, 4-20mA, 0-30M

ATO-LEVS-TY827
$939.85
The guided wave radar level transmitter for both liquids, including corrosive, high-temperature, and low-dielectric medium. Features fast response, interference echo suppression, and robust construction with stainless steel interface. Suitable for complex industrial applications with easy installation and reliable performance.

High Temperature Level Sensor, 4-20mA/0-5V/0-10V, 0-20M

ATO-LEVS-HT20M
$306.89
High temperature level sensor adopts separated structure and consist of 316L stainless steel gas collector, 316L stainless steel capillary tube and protection head. Water/oil/fuel tank level sensor can be used in high temperature (-20~+85℃ (-4~+185℉)) or corrosive liquid. The measuring range can be 0-1m/0-3m/0-5m/0-7m/0-10m/0-12m ~ 0-20m. High temperature liquid level sensor has optional output signal 0-20mA/4-20mA/0-5V/1-5V/0-10V, optional accuracy 0.5%FS or 0.3%FS and power supply DC 24V/12V.

Photoelectric Liquid Level Sensor, Stainless Steel, PNP/ NPN

ATO-MR-G14
$129.99
Stainless steel photoelectric level sensor, 1/4 NPT thread type, is NPN/ PNP signal output directly driving the relay. It is a kind of liquid level controller which detects with infrared ray to avoid inducting wrong action by interference of sun or light. The optical water level sensor is easy mounting and can be used in impure or adhesive liquid. The maximum current consumption of the liquid level sensor is less than 15mA, with low power consumption and fast response.

Photoelectric Liquid Level Sensor, PNP/ NPN

ATO-MR-M12
$105.99
Photoelectric level sensor with 3 wire for sale, M12 thread type, NPN/ PNP signal output directly drives the relay. Photoelectric switch is a kind of liquid level controller which detects with infrared ray to avoid inducting wrong action by interference of sun or light. It is easy mounting and can be used in impure or adhesive liquid. The level sensor is available in two specifications: common type and high-temperature resistant type to meet the needs of different applications.

Tuning Fork Level Switch, Stainless Steel

ATO-TFLS-501
$235.56
Tuning fork level switch online for sale. The vibrating fork level switch has optional standard type/ high temperature type/ extended type and flange type, g1" thread/ 1" NPT two threads can be chosen, input voltage DC24V/ AC220V are available. The sensor material of the tuning fork level switch is 316 stainless steel, and the connector material is 304 stainless steel, which has good corrosion resistance.

Magnetic Level Gauge for Fuel/Oil Tank, 4-20mA

ATO-MLG-01
$659.46
The provided 1m magnetic flap level gauge can be used for medium liquid level detection of various towers, tanks, spherical containers and boilers. Side-mounted/bottom-mounted/top-mounted magnetic level indicator with 4~20mA transmission mode, has a protection class of IP65, and an operating temperature range of -40℃ to 350℃, suitable for various environments such as low temperature to high temperature, vacuum to high pressure, etc.

Electrode Level Sensor for Conductive Liquid, SPDT Contact

ATO-ELS-040
$173.69
Economical price electrode level sensor for sale, with 240VAC/24VDC 5A, SPDT contact, optional power supply 220V AC or 24V AC. The wetted material can be stainless steel or other materials. Conductive liquid level sensor is a switch used to measure the level of liquids in a container by utilizing the principles of conductivity. As the liquid or material rises or falls, it comes into contact with the electrodes, creating electrical connections.

Paddle Level Switch for Silo/Tank, SPDT Contact

ATO-PLS-0415
$103.89
Favorable price paddle level switch for sale, with SPDT contact, stainless steel blade, blade speed 1rpm, optional power supply 220V AC, 110V AC, 24V DC. This rotary paddle level switch features low power consumption of just 4W and a stable blade rotation speed of 1 rpm. It is used to detect and monitor the level of material in tanks, bins or silos etc.

Rotary Paddle Level Switch for Solids, 220VAC/110VAC/24VDC

ATO-PLS-004
$85.95
Buy favorable price rotary paddle level switch online. This is a sensor device designed to monitor and control the level of bulk solids in bins, hoppers, and silos. Optional voltage of 220V AC, 110V AC, 24V DC, blade speed 1rpm. It operates reliably within a temperature range of -20℃ to 80℃. Consisting of a rotating paddle, this switch is inserted into the container, and as the material level rises or falls, the paddle's rotation is impeded.

Vibrating Rod Level Switch for Powder/Tanks/Solids

ATO-VLS-YN100
$327.99
Cost-effective vibrating rod level switch for sale online. This is a vibration level sensor for point-level detection, with 250V AC/30V DC 5A SPDT contact capacity, 2.5W power consumption, and optional voltage of 220V AC or 24V DC. Rod level sensor is widely used in manufacturing, agriculture and chemical processing fields to monitor and control the material level in storage tanks, silos or containers, etc.

RF Admittance Level Switch for Powder/Silo, SPDT

ATO-RFALS-L2000
$184.79
Shop RF admittance level switch online at economical price, with 250V AC 5A contact capacity, SPDT output, and optional voltage of 220V or 24V DC. This RF admittance level switch offers low power consumption of up to 2.5W and operates reliably in ambient temperatures ranging from -40℃ to 65℃. It is widely used in various types of silos, containers, and pipelines for empty and full material measurement.

Hydrostatic Level Sensor for Settlement Monitoring, RS485

ATO-LEVS-CYW303
$332.62
Factory price hydrostatic level sensor for settlement monitoring, measuring liquid media including water, antifreeze and silicone oil, providing high accuracy measurement up to 0.05% FS. Level sensor supports RS485 output signal, and its IP66 protection rating makes it dustproof and water jet resistant. It supports 5~28VDC wide voltage power supply, and the medium temperature range is -40℃~60℃.

Wireless IoT Water Level Sensor, NB/4G/LoRaWAN

ATO-LEVS-BRW100
$393.12
Best wireless IoT water level sensor is for sale at factory price. Wireless liquid level sensor supports NB-IoT/4G/LoRa communication and enables remote cloud monitoring, allowing real-time data viewing and management. Its measurement range is 0-10m, with an accuracy of ±0.5% FS. It features IP65 industrial housing and IP68 probe, is suitable for various scenarios.

Magnetostrictive Level Transmitter, Contactless, 4-20mA

ATO-LEVS-BRW400
$479.85
Low price magnetostrictive level sensor is for sale. Magnetostrictive level sensor feature a high measurement accuracy of ±0.008%FS, ensuring precise and real-time liquid level monitoring. It adopt an IP67 protection rating and a non-contact design, offering standard/corrosion-resistant optional floats and a wide measuring range of 300-1000mm, which are suitable for various scenarios such as liquid level control in storage tanks.