Photoelectric Liquid Level Sensor, Stainless Steel, PNP/ NPN

$129.99
Stainless steel photoelectric level sensor, 1/4 NPT thread type, is NPN/ PNP signal output directly driving the relay. It is a kind of liquid level controller which detects with infrared ray to avoid inducting wrong action by interference of sun or light. The optical water level sensor is easy mounting and can be used in impure or adhesive liquid. The maximum current consumption of the liquid level sensor is less than 15mA, with low power consumption and fast response.
SKU: ATO-MR-G14
*
Free Shipping
Delivery date: 8-12 days

Photoelectric liquid level sensor can be widely applied in water purification, sewage treatment, electrical industry, hydraulic machinery and so on. It provides protection of antipole, overvoltage, short circuit and transient. This optical liquid level sensor has the functions of lack of liquid reminder and full liquid overflow prevention to ensure the safe operation of the equipment.

Specification

ModelATO-WIFS-IR2102D
StructureMetallic structure
TypeStrong acid and strong alkaline type
MaterialStainless steel + glass
Signal OutputNPN/ PNP
Contact FormNO/ NC
Action Mode3 wire: Not switchable
Tread Type1/4 NPT
Detected ObjectWater/ Neutral solution/ Non-viscous acid-alkaline solution
Detection AccuracyLess than plus or minus 1mm
VoltageDC5-24V (including voltage fluctuation 10%)
Max Current Consumption<15mA
Load Currentbelow 100mA
Response Time1ms, 0.25ms
Electrical LifeMore than 100,000 times (opening and closing frequency: 1800 times/hour)
Environmental IlluminationIncandescent Lamp: 5000lx or less. Sunlight: 80,000lx or less
Environment TemperatureON: -30~+100℃ OFF: -40~+120℃ (with no icing and frosting)
Insulation Resistanceabove 20mΩ (500VDC)
Protection LevelIP62
Connection MethodLead-out type (wire length 30cm)
Lead color definitionRed VDC; Blue GND; Yellow out
Mass (Sensor Only)about 40g
AccessoriesSealing ring, nut


Dimensions (Units: mm)

Photoelectric Liquid Level Sensor Dimensions

3 Wire Signal Output and Circuit Diagram

Signal output and circuit diagram of photoelectric liquid level sensor

Mounting Method

Mounting Method of Photoelectric Liquid Level Sensor

Application

Applications of Photoelectric Liquid Level Sensor

Tips: What are the advantages of photoelectric liquid level sensor?

  • Accurate liquid level detection, high repeatability and fast response.
    The output of liquid level is only related to whether the photoelectric probe contacts the liquid level, and has nothing to do with other characteristics of the medium, including temperature, pressure, density and electrical parameters, so the detection of the photoelectric liquid level switch is high accurate and repeatable.
  • It can be made into multi-point liquid level sensor.
    Because the volume of photoelectric probe is relatively small, multiple photoelectric probes can be installed on a measuring body to make multi-point liquid level sensor and controller.
  • Strong adaptability to the environment.
    Photoelectric level switch can be used in vacuum and pressure environment, flammable and explosive occasions, as well as special liquid environment such as turbulence, bubble, vibration and steam, etc., or used in combination with other sensors (such as pressure sensors, etc.).
  • It is suitable for special container installation.
    The photoelectric probe can be installed separately in a small space and is suitable for special tank or container.
Product reviews
Certificate of photoelectric liquid level sensor
5
Jcleve
Avatar
10/25/2021 12:10 AM
Is it possible to get the calibration certificate of your photoelectric liquid level sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can provide factory calibration certificate "free of charge".
Please recommend me a radar level sensor
5
Laura
Avatar
11/10/2021 7:03 PM
I need a radar level sensor, non-contact water level measurement. What do you recommend?
Was this review helpful? Yes No (0/0)
ATO Responded
You have to specify the following: So can recommend the most suited model. What are the requirements for measuring range, output signal, power supply, horn antenna size and installation?
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Photoelectric liquid level sensor can be widely applied in water purification, sewage treatment, electrical industry, hydraulic machinery and so on. It provides protection of antipole, overvoltage, short circuit and transient. This optical liquid level sensor has the functions of lack of liquid reminder and full liquid overflow prevention to ensure the safe operation of the equipment.

Specification

ModelATO-WIFS-IR2102D
StructureMetallic structure
TypeStrong acid and strong alkaline type
MaterialStainless steel + glass
Signal OutputNPN/ PNP
Contact FormNO/ NC
Action Mode3 wire: Not switchable
Tread Type1/4 NPT
Detected ObjectWater/ Neutral solution/ Non-viscous acid-alkaline solution
Detection AccuracyLess than plus or minus 1mm
VoltageDC5-24V (including voltage fluctuation 10%)
Max Current Consumption<15mA
Load Currentbelow 100mA
Response Time1ms, 0.25ms
Electrical LifeMore than 100,000 times (opening and closing frequency: 1800 times/hour)
Environmental IlluminationIncandescent Lamp: 5000lx or less. Sunlight: 80,000lx or less
Environment TemperatureON: -30~+100℃ OFF: -40~+120℃ (with no icing and frosting)
Insulation Resistanceabove 20mΩ (500VDC)
Protection LevelIP62
Connection MethodLead-out type (wire length 30cm)
Lead color definitionRed VDC; Blue GND; Yellow out
Mass (Sensor Only)about 40g
AccessoriesSealing ring, nut


Dimensions (Units: mm)

Photoelectric Liquid Level Sensor Dimensions

3 Wire Signal Output and Circuit Diagram

Signal output and circuit diagram of photoelectric liquid level sensor

Mounting Method

Mounting Method of Photoelectric Liquid Level Sensor

Application

Applications of Photoelectric Liquid Level Sensor

Tips: What are the advantages of photoelectric liquid level sensor?

  • Accurate liquid level detection, high repeatability and fast response.
    The output of liquid level is only related to whether the photoelectric probe contacts the liquid level, and has nothing to do with other characteristics of the medium, including temperature, pressure, density and electrical parameters, so the detection of the photoelectric liquid level switch is high accurate and repeatable.
  • It can be made into multi-point liquid level sensor.
    Because the volume of photoelectric probe is relatively small, multiple photoelectric probes can be installed on a measuring body to make multi-point liquid level sensor and controller.
  • Strong adaptability to the environment.
    Photoelectric level switch can be used in vacuum and pressure environment, flammable and explosive occasions, as well as special liquid environment such as turbulence, bubble, vibration and steam, etc., or used in combination with other sensors (such as pressure sensors, etc.).
  • It is suitable for special container installation.
    The photoelectric probe can be installed separately in a small space and is suitable for special tank or container.
Product reviews
Certificate of photoelectric liquid level sensor
5
Jcleve
Avatar
10/25/2021 12:10 AM
Is it possible to get the calibration certificate of your photoelectric liquid level sensor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can provide factory calibration certificate "free of charge".
Please recommend me a radar level sensor
5
Laura
Avatar
11/10/2021 7:03 PM
I need a radar level sensor, non-contact water level measurement. What do you recommend?
Was this review helpful? Yes No (0/0)
ATO Responded
You have to specify the following: So can recommend the most suited model. What are the requirements for measuring range, output signal, power supply, horn antenna size and installation?
Only registered users can write reviews
Customers who bought this item also bought

Contact Capacitance probe Level Sensor for Liquid/Powder

ATO-LEVS-FKY12
$126.92
Low price capacitance probe level sensor is for sale. Liquid level sensor adopts contact capacitance detection, which can accurately identify media with high/low viscosity and low corrosivity such as glue and lubricating oil. It is made of 316L stainless steel and PEEK material, with a fast response of 20ms, taking into account durability and monitoring timeliness.