Industrial Vibration Sensor, RS485/4-20mA/0-5V/0-10V

$139.66
Good quality industrial vibration sensors for sale support RS485/4-20mA/0-5V/0-10V and other transmission modes to meet different site monitoring needs. This vibration transmitter can detect 10-1600Hz/10-5000Hz frequency range of uniaxial/triaxial vibration displacement, suitable for all kinds of motors, fans, pumps, machine tools and other equipment vibration testing and fault reduction.
SKU: ATO-VT-N01
*
*
Free Shipping
Delivery date: 6-12 days

High performance, low power consumption, anti-interference and composite industrial vibration sensor. Adopting high-performance MEMS chip as the core, it ensures the accuracy, timeliness and safety during transmission of vibration velocity, vibration displacement and temperature measurement. It supports single-axis/three-axis simultaneous measurement and reaches IP67 protection level, which can be used for vibration detection and equipment health monitoring under harsh industrial conditions. A display resolution of up to 0.1 ensures fine data presentation, detects vibration changes in real time, and provides better maintenance solutions for machinery and equipment.

Specification

RS485
ModelATO-SN-3001-N01
Signal OutputRS485
Power SupplyDC10-30V
Power Consumption0.3W (DC24V)
Protection ClassIP67
Frequency Range10-1600/10-5000 (optional)
Vibration Measurement DirectionSingle or triple axis
Transmitter Circuit Operating Temperature-40°C~+80°C, 0%RH~80%RH
Vibration Velocity Measurement Range0-50
Vibration Velocity Measurement Accuracy<1% (@160Hz, 10mm/s)
Vibration Velocity Display Resolution0.1mm/s
Vibration Displacement Measurement Range0-5000
Installation MethodMagnetic mounting
Vibration Displacement Measurement Accuracy<1% (@40Hz, 400μm)
Vibration Displacement Display Resolution0.1μm
Vibration Acceleration Measurement Range±16g (Default g is taken as 9.8m/s2.)
Accuracy of Vibration Acceleration Measurement<1% (@160Hz, 10m/s2)
Acceleration Display Resolution0.1m/s2
Surface Temperature Measurement Range-40°C~+80°C
Temperature Display Resolution0.1°C
Measuring Period(in) real time
Analogue
ModelATO-SN-3001-WZ1
Output SignalCurrent output: 4-20mA
Voltage output: 0-5V/0-10V
Power SupplyDC10-30V
Maximum Power ConsumptionCurrent output: 1.2W
Voltage output: 1.2W
Protection ClassIP67
Frequency Range10-1600/10-5000 (optional)
Vibration Measurement DirectionSingle axis, vertical measurement of surface orientation
Sensor Circuit Operating Temperature-40°C~+60°C, 0%RH~80%RH
Installation MethodMagnetic mounting
Vibration Speed Measurement Range0-50mm/s
Surface Temperature Measurement Range-40°C~+80°C
Vibration Velocity Measurement Accuracy±1.5% FS (@1kHz, 10mm/s)
Load CapacityCurrent output: ≤600Ω
Voltage output: Output resistance ≤250Ω
Detection Period(in) real time


Feature

  • Industrial vibration sensors use high-performance MEMS chips with high measurement accuracy and strong anti-interference capability.
  • The vibration transmitter provides threaded mounting and magnetic suction mounting.
  • It can measure single-axis and three-axis vibration speed, vibration displacement, motor surface temperature and other parameters.
  • Support 10-30V DC wide voltage power supply, protection grade IP67, sensor support remote upgrade.

Dimension (unit: mm)

Industrial vibration sensor size

Wiring Instructions

  1. There are certain specifications for wiring the 485 line field, please refer to the information package for details.
  2. When the vibration sensor is connected to the 485 bus, make sure that the addresses of multiple devices are not duplicated.
  3. The vibration sensor is available in m8*1.25*10 and m5*7 external threads, in addition to magnetic mounting.
  4. Power supply and 485 signal:

Industrial vibration sensor wiring instructions

Note: Wide voltage power supply input 10~30V is available. 485 signal line wiring, pay attention to the A/B lines should not be reversed, and the addresses of multiple devices on the bus should not be in conflict.

Application

Industrial vibration sensor application.

Tips: The basics of this industrial vibration sensor

  • Vibration sensors are available in single-axis and tri-axis options. Single-axis can measure vibration values and temperature, while tri-axis can measure vibration values, displacement and temperature values in the X-, Y- and Z-axes.
  • Vibration sensor vibration value measurement range of 0-50mm / s, vibration displacement measurement range of 0-5000um, are supported by custom other range output, measurement accuracy of 1.5% FS, compared with products on the market, we can better meet your needs.
  • Support RS485, analogue and other signals can be selected. The RS-485/analog style of this vibration transmitter is powered by external power supply.
  • The mounting method has threaded, magnetic way to choose, which threaded mounting M8, M5 two kinds of specifications can be selected, if you need other sizes can contact customer service for free customisation.

Product reviews
Useful industrial vibration sensor
5
Yasmine
Avatar
12/30/2024 2:28 AM
This industrial vibration sensor is very useful. I use it for vibration detection of machine tools. The good display resolution ensures data presentation and can detect vibration changes in real time.
Was this review helpful? Yes No (0/0)
Output signal value
5
Irinas
Avatar
5/28/2025 9:11 PM
For current output (4-20 mA) and voltage output (0-5 V or 0-10 V), does it represent the effective value of vibration velocity (e.g. mm/s RMS) or the raw signal?
Was this review helpful? Yes No (0/0)
ATO Responded
The current output (4-20 mA) signal or voltage output signal (0-5 V or 0-10 V) represents the real-time measurement value.
Some information
4
Neyev
Avatar
10/14/2025 9:08 PM
I have a CNC machine tool and need to monitor its vibration during operation. I found your sensor, the ATO-SN-3001-N01, which has an RS485 model, and will be connecting it to my controller via RS485. I need confirmation that your sensor is suitable for CNC machines and industrial applications, as well as how to install and repair it.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, this unit is suitable for CNC machines, including motor vibration frequency measurement. It comes with either a magnetic or threaded mounting option. Does it meet your requirements?
Sensor Pricing
5
Obers
Avatar
2/11/2026 12:32 AM
Hello, I would like to inquire about the pricing of the ATO-VT-N01 sensor with an RS485 communication interface. Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
Regarding the price of the ATO-VT-N01 (with RS485 communication interface), please refer to the information on our website.
Real-time response
5
Nott
Avatar
3/9/2026 2:41 AM
Does the ATO-VT-N01 triaxial industrial vibration sensor (RS485 interface) have a real-time response? The product I'm currently using in Thailand has a 3-10 second delay after vibration begins. Could you provide a test video?
Was this review helpful? Yes No (0/0)
ATO Responded
1. After the sensor starts, data updates and calculations are required initially, resulting in a delay in output. Once normal operation is achieved, data can be read in real-time.
2. We can only provide installation photos for your reference.
Differences between two sensors
5
Kesilla
Avatar
6/17/2026 9:25 PM
Hello, I'm considering two different vibration sensors. Could you tell me the difference between the ATO-VT-N01 and ATO-SN-3001-N01 sensors? They look very similar, but I can't tell the difference.
Was this review helpful? Yes No (0/0)
ATO Responded
ATO-VT-N01 and ATO-SN-3001-N01 are the same industrial vibration sensor. ATO-VT-N01 is the SKU, and ATO-SN-3001-N01 is the model.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

High performance, low power consumption, anti-interference and composite industrial vibration sensor. Adopting high-performance MEMS chip as the core, it ensures the accuracy, timeliness and safety during transmission of vibration velocity, vibration displacement and temperature measurement. It supports single-axis/three-axis simultaneous measurement and reaches IP67 protection level, which can be used for vibration detection and equipment health monitoring under harsh industrial conditions. A display resolution of up to 0.1 ensures fine data presentation, detects vibration changes in real time, and provides better maintenance solutions for machinery and equipment.

Specification

RS485
ModelATO-SN-3001-N01
Signal OutputRS485
Power SupplyDC10-30V
Power Consumption0.3W (DC24V)
Protection ClassIP67
Frequency Range10-1600/10-5000 (optional)
Vibration Measurement DirectionSingle or triple axis
Transmitter Circuit Operating Temperature-40°C~+80°C, 0%RH~80%RH
Vibration Velocity Measurement Range0-50
Vibration Velocity Measurement Accuracy<1% (@160Hz, 10mm/s)
Vibration Velocity Display Resolution0.1mm/s
Vibration Displacement Measurement Range0-5000
Installation MethodMagnetic mounting
Vibration Displacement Measurement Accuracy<1% (@40Hz, 400μm)
Vibration Displacement Display Resolution0.1μm
Vibration Acceleration Measurement Range±16g (Default g is taken as 9.8m/s2.)
Accuracy of Vibration Acceleration Measurement<1% (@160Hz, 10m/s2)
Acceleration Display Resolution0.1m/s2
Surface Temperature Measurement Range-40°C~+80°C
Temperature Display Resolution0.1°C
Measuring Period(in) real time
Analogue
ModelATO-SN-3001-WZ1
Output SignalCurrent output: 4-20mA
Voltage output: 0-5V/0-10V
Power SupplyDC10-30V
Maximum Power ConsumptionCurrent output: 1.2W
Voltage output: 1.2W
Protection ClassIP67
Frequency Range10-1600/10-5000 (optional)
Vibration Measurement DirectionSingle axis, vertical measurement of surface orientation
Sensor Circuit Operating Temperature-40°C~+60°C, 0%RH~80%RH
Installation MethodMagnetic mounting
Vibration Speed Measurement Range0-50mm/s
Surface Temperature Measurement Range-40°C~+80°C
Vibration Velocity Measurement Accuracy±1.5% FS (@1kHz, 10mm/s)
Load CapacityCurrent output: ≤600Ω
Voltage output: Output resistance ≤250Ω
Detection Period(in) real time


Feature

  • Industrial vibration sensors use high-performance MEMS chips with high measurement accuracy and strong anti-interference capability.
  • The vibration transmitter provides threaded mounting and magnetic suction mounting.
  • It can measure single-axis and three-axis vibration speed, vibration displacement, motor surface temperature and other parameters.
  • Support 10-30V DC wide voltage power supply, protection grade IP67, sensor support remote upgrade.

Dimension (unit: mm)

Industrial vibration sensor size

Wiring Instructions

  1. There are certain specifications for wiring the 485 line field, please refer to the information package for details.
  2. When the vibration sensor is connected to the 485 bus, make sure that the addresses of multiple devices are not duplicated.
  3. The vibration sensor is available in m8*1.25*10 and m5*7 external threads, in addition to magnetic mounting.
  4. Power supply and 485 signal:

Industrial vibration sensor wiring instructions

Note: Wide voltage power supply input 10~30V is available. 485 signal line wiring, pay attention to the A/B lines should not be reversed, and the addresses of multiple devices on the bus should not be in conflict.

Application

Industrial vibration sensor application.

Tips: The basics of this industrial vibration sensor

  • Vibration sensors are available in single-axis and tri-axis options. Single-axis can measure vibration values and temperature, while tri-axis can measure vibration values, displacement and temperature values in the X-, Y- and Z-axes.
  • Vibration sensor vibration value measurement range of 0-50mm / s, vibration displacement measurement range of 0-5000um, are supported by custom other range output, measurement accuracy of 1.5% FS, compared with products on the market, we can better meet your needs.
  • Support RS485, analogue and other signals can be selected. The RS-485/analog style of this vibration transmitter is powered by external power supply.
  • The mounting method has threaded, magnetic way to choose, which threaded mounting M8, M5 two kinds of specifications can be selected, if you need other sizes can contact customer service for free customisation.

Product reviews
Useful industrial vibration sensor
5
Yasmine
Avatar
12/30/2024 2:28 AM
This industrial vibration sensor is very useful. I use it for vibration detection of machine tools. The good display resolution ensures data presentation and can detect vibration changes in real time.
Was this review helpful? Yes No (0/0)
Output signal value
5
Irinas
Avatar
5/28/2025 9:11 PM
For current output (4-20 mA) and voltage output (0-5 V or 0-10 V), does it represent the effective value of vibration velocity (e.g. mm/s RMS) or the raw signal?
Was this review helpful? Yes No (0/0)
ATO Responded
The current output (4-20 mA) signal or voltage output signal (0-5 V or 0-10 V) represents the real-time measurement value.
Some information
4
Neyev
Avatar
10/14/2025 9:08 PM
I have a CNC machine tool and need to monitor its vibration during operation. I found your sensor, the ATO-SN-3001-N01, which has an RS485 model, and will be connecting it to my controller via RS485. I need confirmation that your sensor is suitable for CNC machines and industrial applications, as well as how to install and repair it.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, this unit is suitable for CNC machines, including motor vibration frequency measurement. It comes with either a magnetic or threaded mounting option. Does it meet your requirements?
Sensor Pricing
5
Obers
Avatar
2/11/2026 12:32 AM
Hello, I would like to inquire about the pricing of the ATO-VT-N01 sensor with an RS485 communication interface. Thank you.
Was this review helpful? Yes No (0/0)
ATO Responded
Regarding the price of the ATO-VT-N01 (with RS485 communication interface), please refer to the information on our website.
Real-time response
5
Nott
Avatar
3/9/2026 2:41 AM
Does the ATO-VT-N01 triaxial industrial vibration sensor (RS485 interface) have a real-time response? The product I'm currently using in Thailand has a 3-10 second delay after vibration begins. Could you provide a test video?
Was this review helpful? Yes No (0/0)
ATO Responded
1. After the sensor starts, data updates and calculations are required initially, resulting in a delay in output. Once normal operation is achieved, data can be read in real-time.
2. We can only provide installation photos for your reference.
Differences between two sensors
5
Kesilla
Avatar
6/17/2026 9:25 PM
Hello, I'm considering two different vibration sensors. Could you tell me the difference between the ATO-VT-N01 and ATO-SN-3001-N01 sensors? They look very similar, but I can't tell the difference.
Was this review helpful? Yes No (0/0)
ATO Responded
ATO-VT-N01 and ATO-SN-3001-N01 are the same industrial vibration sensor. ATO-VT-N01 is the SKU, and ATO-SN-3001-N01 is the model.
Only registered users can write reviews
Customers who bought this item also bought

Noise Sensor, 0-5V, 0-10V, 4-20mA

ATO-YS1920
$127.46
With a compact design measuring 110mm in length and 20mm in diameter, featuring versatile output options of 0-5V, and 4-20mA, covering frequencies from 31.5Hz to 8kHz, noise sensor captures a broad spectrum of sound.

Oxygen Gas Sensor/Transmitter, RS485/4-20mA/0-5V

ATO-GS-O2-3002
$101.58
The oxygen gas sensor measures ranges of 0-30%VOL for RS485 output and 0-25%VOL for analog output, with an accuracy of ±3%FS and a resolution of 0.1%VOL. Gas transmitter has a power supply range of 10~30V DC, with the 0~10V output type requiring a 24V supply. Widely used in industries such as process control, environmental monitoring, medical devices, food and beverage, safety detection, scientific research, and combustion system optimization.

Temp and Humidity Sensor/Transmitter, Duct/Wall Mounted, 0-10V

ATO-TAHT-FG6010
$69.83
Temperature and humidity transmitter adopts a digital temperature and humidity sensor, and converts air temperature and humidity into 0-10V standard signal. Industrial temperature and humidity transmitter has explosion-proof aluminum alloy housing, metal filter screen, wide measuring range, high measurement accuracy in high-low temperature and humidity, fast response, excellent long-term stability and anti-chemical pollution.

Portable Hydrogen (H2) Gas Detector, 0 to 500/1000/2000 ppm

GD200-H2
$784.62
Portable hydrogen (H2) gas detector draws the gas sample by a micro pump, with high accuracy and reliability, measurement ranging from 0 to 500ppm, 1000ppm, 2000ppm, 5000ppm for your choice. Real-time LCD display, audible, visual & vibrating alarm, durable and compact design, easy to carry and operate. High precision H2 detector with measuring range 0-10ppm (0.001ppm) is also available.

Digital Pressure Sensor for Hydraulic/Steam/Air

ATO-PRES-PX300
$173.33
Digital pressure sensor covers -0.1 to 100 MPa and supports 4–20mA, 0–20mA, voltage and RS485 outputs, with a backlit LCD display. Suitable for hydraulic, steam, air and liquid pressure measurement, with medium temperatures from -40°C to 60°C.