EMI Power Line Filter 6A, 3 phase

$84.93
General purpose EMI line filter, 6 Amp rated current, three phase three wire, single stage, rated voltage 250V/440V 50/60Hz, compact size, easily connected with stud, low leakage current, excellent attenuation performance.
SKU: ATO-EMI-1006
Free Shipping
Delivery date: 8-12 days

EMI filter/ noise filter with 6A rated current is widely used in all kinds of 3-phase 3-wire industrial automation equipment, such as 3 phase motor drives, printing equipment, packaging equipment, textile equipment, industrial air conditioners etc.

Specification

ModelATO-MT710-6
Filter TypeEMI
ConfigurationSingle Stage
Rated Current @ 40℃6A
Rated Voltage250V/440V AC
Operating Frequency50/60Hz
PhaseThree Phase Three Wire
Filter Range150KHz-30MHz
Leakage Current≤5mA @ 250V AC 50Hz 20℃
Hipot Rating (one minute)Line to Line1450V DC
Line to Ground2250V DC
Climatic Category25/085/21
Working Temperature-25°C~+85°C
Output TermainalThreaded stud M4
Weight380g
DimensionSee below

Dimensions (Unit: mm)

6A 3-phase EMI Line Filter Dimension

Electrical Schematic

Three phase emi filter electrical schematic

Insertion Loss Table (in 50Ω system acccording to IEC/CISPR No.17)

6A 10A 20A 30A Power Line Filter Insertion Loss Table

40A 50A 100A EMI Line Filter Insertion Loss Table

Tips: What is leakage current of power line filter?

Leakage current of EMI line filter means the current flow between “phase wire & central wire” and housing (ground) under 250VAC/50Hz. It depends on the common mode capacitor (also called “Y” capacitor) connecting “phase wire & ground” and “central wire & ground”. Leakage current is an important parameter of filter. The larger volume Y capacitor has, the smaller common mode impedance is, and thus common mode noise suppression effect would be better. Leakage current is a performance parameter of line filter, that is, filter performance gets better when leakage current becomes larger. According to different requirements, different safety standard has different rules for leakage current, typical value is 0.5~5.0mA.

Why safety institution required the max allowable leakage current? The purpose is to limit expected grounding return current value. Line to ground capacitor provides the channel flowing to housing for 50Hz/60Hz current. As long as the equipment is earthed, these current will flow in the grounding circuit, and will not cause danger. But we need to know, even if grounding circuit is reliable, it still maybe loss effect, that is, at the time grounding circuit communication might through human body. To avoid this happening, it must limit maximum leakage current parameter, making grounding return current as a safety value, and typical value is 0.5 to 5.0mA.

Single Phase and Three Phase EMI Power Line Filters

In this video, basic information and installation guidelines for single phase and three phase EMI power line filters are presented.

Product reviews
Do your 3 phase EMI power line filters provide 4 wire filter lines?
5
Zumwalt
Avatar
11/10/2021 1:30 AM
Can your power line filter of rated voltage 250V/440V work for 208V/120V? Can you provide 4 wire filters?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, of course, and we can provide 3 wire or 4 wire filter.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

EMI filter/ noise filter with 6A rated current is widely used in all kinds of 3-phase 3-wire industrial automation equipment, such as 3 phase motor drives, printing equipment, packaging equipment, textile equipment, industrial air conditioners etc.

Specification

ModelATO-MT710-6
Filter TypeEMI
ConfigurationSingle Stage
Rated Current @ 40℃6A
Rated Voltage250V/440V AC
Operating Frequency50/60Hz
PhaseThree Phase Three Wire
Filter Range150KHz-30MHz
Leakage Current≤5mA @ 250V AC 50Hz 20℃
Hipot Rating (one minute)Line to Line1450V DC
Line to Ground2250V DC
Climatic Category25/085/21
Working Temperature-25°C~+85°C
Output TermainalThreaded stud M4
Weight380g
DimensionSee below

Dimensions (Unit: mm)

6A 3-phase EMI Line Filter Dimension

Electrical Schematic

Three phase emi filter electrical schematic

Insertion Loss Table (in 50Ω system acccording to IEC/CISPR No.17)

6A 10A 20A 30A Power Line Filter Insertion Loss Table

40A 50A 100A EMI Line Filter Insertion Loss Table

Tips: What is leakage current of power line filter?

Leakage current of EMI line filter means the current flow between “phase wire & central wire” and housing (ground) under 250VAC/50Hz. It depends on the common mode capacitor (also called “Y” capacitor) connecting “phase wire & ground” and “central wire & ground”. Leakage current is an important parameter of filter. The larger volume Y capacitor has, the smaller common mode impedance is, and thus common mode noise suppression effect would be better. Leakage current is a performance parameter of line filter, that is, filter performance gets better when leakage current becomes larger. According to different requirements, different safety standard has different rules for leakage current, typical value is 0.5~5.0mA.

Why safety institution required the max allowable leakage current? The purpose is to limit expected grounding return current value. Line to ground capacitor provides the channel flowing to housing for 50Hz/60Hz current. As long as the equipment is earthed, these current will flow in the grounding circuit, and will not cause danger. But we need to know, even if grounding circuit is reliable, it still maybe loss effect, that is, at the time grounding circuit communication might through human body. To avoid this happening, it must limit maximum leakage current parameter, making grounding return current as a safety value, and typical value is 0.5 to 5.0mA.

Product reviews
Do your 3 phase EMI power line filters provide 4 wire filter lines?
5
Zumwalt
Avatar
11/10/2021 1:30 AM
Can your power line filter of rated voltage 250V/440V work for 208V/120V? Can you provide 4 wire filters?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, of course, and we can provide 3 wire or 4 wire filter.
Only registered users can write reviews
Customers who bought this item also bought

2 hp VFD, Single Phase to Three Phase VFD

GK3000-2S0015
$183.16
2 hp VFD, convert single phase to three phase for AC motor speed controls, 7 amps, IP20, RS485 enabled, manufacturer direct sale.